Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Calabasas, CA: What It Takes and What It Costs
Concrete driveways and concrete work in Calabasas typically run $4,500 to $12,000 for a new pour and $5,000 to $14,000 when the old slab has to come out first. Most residential pours take five to seven working days from demo to the day you can park on it, though hillside lots with grade and drainage complications stretch that. Call (888) 427-1733 for a free on-site estimate with written line-item pricing.
Calabasas isn’t flat-pour country. Long sloped approaches, canyon switchbacks, and driveways that double as drainage channels for the hillside above them change what “concrete work” actually means here.
How We Pour Concrete in Calabasas, Stage by Stage
Every driveway is a small civil engineering job. Here’s the real sequence.
Stage 1: Site walk and layout (day 1, about an hour). We measure the run, check the existing slope with a level, and note where water currently goes during a storm. On Calabasas hillside lots this is where we find the real issue: a driveway pitched toward the garage, or a canyon run that needs a swale or trench drain before any concrete is ordered. You decide final width, apron style, and whether we’re tying into an existing walkway.
Stage 2: Demo and haul-off (1 – 2 days). Old slab, broken apron, root-damaged sections come out with a jackhammer and get hauled. Roots from a protected coast live oak within the setback? That gets flagged before demo, not after. You approve the haul-away cost as a line item.
Stage 3: Subgrade prep and base (1 – 2 days). We excavate to depth, compact native soil, and lay 4 – 6 inches of compacted Class II base. Sloped sites may need deeper excavation and, on some canyon lots, an engineered solution – retaining or a caisson-supported approach – if the grade is steep enough. You see the base before we pour. This is the stage that separates a driveway that lasts 30 years from one that cracks in three.
Stage 4: Formwork, rebar, and pour (1 – 2 days). Forms set to slope, #4 rebar on a grid, then the pour at 4,000 – 4,500 psi with a slump you can actually finish. We cut control joints within 24 hours and finish the surface to the texture you picked. You decide the finish before this stage starts, not during.
Stage 5: Cure and seal (5 – 7 days before traffic). Concrete cures slowly. We keep you off it for the first week and apply a sealer at the 28-day mark if you opted for one. Final walkthrough happens then, with the 730-Day Done Right Promise in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’re Choosing: The Real Spec Decisions
- Basic broom finish versus exposed aggregate or stamped. Broom is the workhorse: $4,500 – $12,000 for a standard two-car run, solid traction, low maintenance. Exposed aggregate costs more, hides tire marks and dust better, and suits a hillside estate entry. Stamped adds the most cost and needs sealing every few years – worth it on a showpiece approach, overkill on a canyon service drive.
- Standard 4-inch slab versus thickened/reinforced sections. Standard pour works for cars. If a heavy truck, RV, or a delivery turning circle crosses the apron, or the subgrade is soft from previous erosion, we spec thicker edges and heavier rebar. That pushes the job toward the top of the range.
- Drainage: grade alone versus trench drain or channel drain. On Calabasas hillside lots, water off the slope above is the number one cause of driveway failure. A trench drain or a properly pitched swale costs a fraction of replacing a heaved slab in five years.
- Sealed versus unsealed. Sealing runs $250 – $700 and repels the dust and sun damage that grey out an unsealed pour in a few seasons. Cheap insurance on a sun-baked south-facing drive.
- Colored or integral pigment. Mixed into the concrete, not painted on. Holds color better and won’t peel. Adds a modest percentage to the pour cost.
What Concrete Driveways & Concrete Work Costs in Calabasas, CA
For a typical residential driveway, you’re looking at $4,500 – $12,000 for new concrete installation and $5,000 – $14,000 for a full replacement where demo and haul-off are included. Here’s what moves the number from the low end to the high end:
- Size and slope. A flat 400-square-foot apron sits near the bottom. A 1,000-square-foot canyon run with a 12-degree grade, stepped or terraced, sits near the top.
- Existing condition. Demo, haul-off, and root or subgrade repair all add cost. A clean removal over solid base is the cheap version.
- Drainage and grading work. Trench drains, swales, and regrading push a driveway into civil-work territory. Necessary on most sloped Calabasas lots, and budgeted upfront, not discovered mid-pour.
- Finish and reinforcement. Broom and standard rebar is baseline. Exposed aggregate, stamping, integral color, or a thickened reinforced design adds cost.
- Permits and inspection. Some concrete work in Calabasas triggers a permit, especially where the drive crosses a public right-of-way, alters drainage on a hillside lot, or is part of a larger site plan. We confirm scope before quoting so the price you sign is the price you pay.
Your written estimate lists demo, base, rebar, pour, finish, joint cutting, and haul-off separately. What isn’t always included: drainage systems added after the walk, arborist review if a protected oak sits near the work, and any permit fees tied to site-specific conditions. Those get quoted in writing before work starts, so there are no mid-job surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Calabasas Homes Specifically Do to This Job
Most of the hillside work we do sits on canyon lots in the 91302 and 91372 ZIPs, and the grade changes everything. A driveway on Mulholland Heights or up in the canyons isn’t a slab on flat ground – it’s a retaining, drainage, and slope-management problem wearing concrete. We see two failure patterns repeatedly: slabs heaved by water that had nowhere to go after a winter storm, and cracking where a homeowner poured over an old base that had already settled. The post-Woolsey Fire rebuilds around the canyon edges brought stricter drainage and erosion-control expectations, and Chapter 7A ignition-resistant standards influence what touches the house at the driveway’s end. Protected coast live oaks on many of these lots mean arborist setbacks and root-zone restrictions that can shift the entire driveway layout before a single form is set.
Because so much of what happens to a Calabasas driveway connects to the wider outdoor project – drainage, walls, hardscape – it’s often part of a full Driveway & Pavers in Calabasas scope, and homeowners frequently pair new concrete with a Garage Conversion ADU in Calabasas or a New Detached ADU in Calabasas so the driveway, utilities, and access are planned together. If you want to see everything our Driveway & Pavers service covers across the Calabasas area, that’s the place to start.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Calabasas
Most residential concrete driveways take five to seven working days from demo to pour completion, then five to seven more days before you can drive on it. Hillside lots with drainage or retaining work can run two to three weeks. Call (888) 427-1733 for a timeline specific to your property.
It depends on scope. A like-for-like replacement of a private driveway usually doesn’t, but work crossing a public right-of-way, altering drainage on a hillside lot, or tying into a larger permitted project typically does. We confirm the permit requirement before quoting so nothing surfaces mid-job.
No, if the scope we quoted is accurate. Our written line-item estimate covers demo, base, rebar, pour, and finish at a fixed number. The only changes come from conditions nobody could see – an unexpected underground utility or a subgrade problem – and those get quoted in writing for your approval before we proceed.
Only if the existing slab is sound and the base underneath is stable. In Calabasas, older driveways have often settled or heaved from drainage issues, and pouring over a failed base just moves the problem up. We test the base before recommending a full replacement versus an overlay.
Every project is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing. Call (888) 427-1733 to talk through what’s covered.
Get a Free Estimate for Concrete Driveways & Concrete Work in Calabasas
We’ll walk your property, check the grade and drainage, and hand you a written line-item estimate for concrete driveways & concrete work in Calabasas – no pressure, no vague lump sum. Calls are answered by a live person around the clock, and estimates are free. Call (888) 427-1733 to schedule yours.
Written by the team at Groundwork Construction Co.