Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Los Angeles: What It Costs and How Fast It Goes In
Aluminum Fence installation in Los Angeles runs $4,720 to $11,800 for most residential properties, and a typical side-yard or front-yard run is finished in two to four days once permits clear. The fence itself goes up faster than wood or masonry; what sets the schedule is the permit counter and the condition of the posts’ footings. Call (888) 427-1733 and we’ll walk your property line and give you a written, line-item number before anything is ordered.
How we install an aluminum fence, stage by stage
Aluminum is a manufactured system, not a built-on-site assembly, so the sequence matters more than the cutting. Here’s what actually happens, in order, and when you have to make a decision.
Stage 1: Site walk and layout (day of estimate). We measure the run foot by foot, note grade changes, and identify what’s underground – irrigation lines, gas stubs, the low-voltage landscape wiring that runs along most LA property lines. You decide the fence height, the post spacing, and whether gates are included. This is also when we tell you whether your setback or the slope will force a stepped or racked panel.
Stage 2: Permitting and HOA approval (typically 2 to 6 weeks in Los Angeles). Pool barriers and fences over six feet need permits; most runs under six feet in a side or rear yard don’t, but hillside properties and anything in a WUI zone can trigger extra review. If your property is in an HOA, the architectural review runs in parallel. You’ll need to supply the plat or survey if the fence sits near an easement.
Stage 3: Demo and footing prep (day one on site). Old fencing comes down, posts are laid out on string lines, and footings are dug to depth. In LA’s clay and decomposed-granite soils, we set posts in concrete rather than driving them, because a driven post in expansive soil walks out of plumb within two seasons.
Stage 4: Setting posts and panels (days two and three). Posts cure, then panels and gates hang. Aluminum runs fast because panels are pre-punched and hardware is drilled at the factory. A 150-foot run is usually two working days of assembly.
Stage 5: Walkthrough and punch list (final day). We check gate swing, latch alignment, and post plumb, and you sign off. If anything’s off, the 730-Day Done Right Promise covers it – we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Aluminum isn’t one product. The decisions below are the ones that change the look, the price, and how the fence holds up under LA sun and the occasional Santa Ana wind event.
- Residential vs. industrial grade. Residential aluminum (roughly 0.050 to 0.062 inch wall thickness) suits most side and rear yards. Industrial grade is thicker and stops a dog pushing through, but adds cost and weight. For a standard lot, residential is the honest recommendation.
- Powder-coat finish. Standard colors are black, bronze, and white. Black hides dust and sun fade best; white shows everything. Custom colors cost more and take longer to ship.
- Height and picket style. Four-foot is common for a boundary fence, five-foot for privacy-leaning runs, six-foot for pool barriers and security. Flat-top, spear-top, and pressed-point pickets are all stock profiles.
- Racked vs. stepped panels. Racked panels follow a slope in one continuous line; stepped panels drop in level sections. Stepped costs more in labor and looks more formal.
- Gates and hardware. Self-closing, self-latching hinges are code for pool barriers. A driveway gate in aluminum is a real upgrade – heavier frame, larger posts, and a different footing spec.
- Brand. We specify from a curated set of verified manufacturers rather than whatever’s in stock, because a fence is a 20-year decision and the finish is the first thing to fail on a cheap panel.
What Aluminum Fence costs in Los Angeles, CA
Most Los Angeles aluminum fence projects land between $4,720 and $11,800. That’s the full installed number – materials, footings, labor, cleanup, and gate hardware – not a per-foot teaser. The variables that push a job to the top of that range:
- Linear feet. A 100-foot run is the baseline. Every additional 50 feet adds roughly 30 to 40 percent to the panel and post cost.
- Grade and slope. A flat lot is fastest. A hillside run with racked panels and stepped footings adds labor and sometimes engineering review.
- Existing fence removal. Tearing out a rusted chain-link or a failed wood fence, and hauling it off, is a line item. Concrete footings from the old fence have to be broken out.
- Gate count and type. A pedestrian gate is modest. A vehicle gate with heavier posts and a different footing spec moves the number noticeably.
- Permit scope. Pool barriers, hillside locations, and WUI-zone properties add permit and inspection time. Standard side-yard runs usually don’t.
A written estimate from us itemizes each of those lines so you see what’s included – and we don’t change the number mid-job. Pricing is upfront, no surprises. What typically isn’t included: survey work if the property line is disputed, HOA fees, and landscaping repair around the post holes.
See the difference
Before
After
Before
After
Before
AfterWhat Los Angeles homes specifically do to this job
Los Angeles construction answers to some of the strictest seismic and fire-zone rules in the country, and even a fence feels it. In the hills – Hollywood Hills, the Santa Monica Mountains, the canyons off Laurel and Mulholland – fences near the wildland-urban interface have to meet ignition-resistant detailing, and hillside grading rules affect how footings are set on a slope. On the flats, the housing stock is a patchwork: 1920s-40s Spanish Colonial and Craftsman bungalows in neighborhoods like Hancock Park and Angelino Heights, postwar stucco tract homes across the Valley, and thousands of 1960s-70s wood-frame dingbats and soft-story apartments in Koreatown and the Valley that are being retrofitted under the Soft-Story Retrofit Ordinance. What that means for a fence: tight side yards between bungalows, shared property lines that run within inches of a neighbor’s stucco, and old irrigation and gas lines that surface the moment a post hole goes in. We plan around them. Down by the coast, salt air and marine layer corrode cheap finishes faster than the dry inland heat does – powder-coat quality is the difference between a fence that looks new at year ten and one that’s chalky at year five. Call (888) 427-1733 to schedule a walk of your property.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Aluminum Fence in Los Angeles
The physical install is two to four days for a typical residential run. The full timeline from signed estimate to finished fence is usually three to six weeks, most of which is permit review and material lead time. We’ll give you the real calendar dates, not an optimistic range.
Fences under six feet in a rear or side yard generally don’t need a permit; six-foot and taller runs, pool barriers, and hillside or WUI-zone properties usually do. Local code and HOA rules can be stricter. Call (888) 427-1733 and we’ll tell you what your specific property needs before you order anything.
No. We quote from a site walk and itemize every line, and the number you sign is the number you pay. If we hit something unanticipated – a buried gas line, an old footing that has to be broken out – we stop and talk to you about it before doing the work. No surprise invoices.
Most residential projects run $4,720 to $11,800 installed, depending on linear feet, slope, gate count, and permit scope. A short side-yard run sits near the bottom; a long hillside run with a vehicle gate and pool-barrier code compliance sits near the top. Call (888) 427-1733 for an exact written quote – estimates are free.
Every project is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it sits on top of the manufacturer’s finish warranty on the panels. Built to last, backed in writing.
Get a free aluminum fence estimate in Los Angeles
If you’re planning an aluminum fence in Los Angeles, call (888) 427-1733. We’ll schedule a free on-site estimate, walk your property line, and hand you a written, itemized quote – no pressure, no vague numbers. A live person answers the phone any hour, any day, so you won’t sit in a voicemail queue until Monday. If the fence is part of a larger project, we can scope it alongside Fence Installation in Los Angeles, or fold it into a broader Fence Installation plan. Homeowners in Los Angeles often pair this with Driveway Repair & Replacement in Los Angeles or Patios, Walkways & Pool Decks in Los Angeles when the same yard is getting reworked.
Written by the team at Groundwork Construction Co..