Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Los Angeles: Cost, Timeline, and What the Ground Is Doing Under Your Slab
Concrete driveways & concrete work in Los Angeles typically run $5,310 – $14,160 for a full driveway installation, with most jobs taking 4 to 7 working days from demo to the day you can park on it. That range covers a standard 2-car pour with code-required reinforcement, proper base prep, and a finished surface. Call (888) 427-1733 for a free on-site estimate with a written line-item price.
How the Work Actually Unfolds, From Demo Day to Cure Day
Concrete isn’t a mystery once you’ve poured a few hundred slabs in this basin. The order of operations is fixed. What changes from job to job is how much hidden work the ground throws at us.
Stage 1: Site visit and layout (day 1)
We measure the run, check the slope away from the foundation, and look for what’s underneath: old slab, tree roots, failed subgrade, or buried irrigation and gas lines. You decide the width, the finish, and the joint pattern here. A standard LA driveway is 10 to 12 feet wide; going to 16 feet for a second vehicle changes the base prep and the volume number.
Stage 2: Demolition and haul-off (days 1 – 2)
Old concrete comes out with a breaker and goes to a C&D recycling facility. A typical single-car slab is 6 to 10 tons of debris. If you’re keeping part of the existing pour, we saw-cut a clean joint line instead of jackhammering the whole thing, which saves labor and dump fees.
Stage 3: Grading, base, and drainage (days 2 – 3)
This is where LA jobs live or die. We excavate to depth, compact the subgrade, and build a crushed-rock base 4 to 6 inches thick, then set the fall so water runs to the street or a drain instead of the garage door. On hillside lots with slope above, we add a channel drain at the apron. You approve the drain locations before the steel goes in.
Stage 4: Formwork, rebar, and inspection (days 3 – 4)
Forms go up, then #3 or #4 rebar on a 12- to 18-inch grid, chaired off the ground so it sits mid-slab. If the driveway touches the public right-of-way, the city inspects the formwork and reinforcement before any concrete is placed. We schedule that inspection; you don’t have to sit home for it.
Stage 5: Pour, finish, and cure (days 4 – 7)
The pour is one day. Finish, control joints, and cure compound are same day. Then comes the part nobody likes: you stay off it for 7 days for foot traffic, and 10 days before a car parks on it. A full cure takes about 28 days, which matters if you plan to seal it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Your Choices: What You’re Actually Picking Between
The menu for concrete work is short, but each pick trades cost against longevity in a specific way:
- Standard gray 4-inch slab with rebar: the baseline. Holds up fine for passenger cars. Skip the fiber-mesh add-on unless your mix already includes it; fiber alone doesn’t replace steel for a driveway carrying a truck.
- 6-inch slab with heavier mesh and rebar: costs more per square foot because of concrete volume, but it survives an RV, a work truck, or a heavy delivery. Worth it if you’ll ever park something big on it.
- Broom finish: the standard for traction. Cheap, reliable, hides minor surface imperfections. A trowel-smooth finish looks sharp but turns slick when it rains.
- Exposed aggregate or stamp: more decorative and more expensive, and both trap dirt in a way broomed concrete doesn’t. If you want a decorative look, a stamped overlay on a fresh slab gives a similar effect to a full stamp job for less money.
- Base prep and drainage: not glamorous, but this is the choice that determines whether your slab cracks in three years or lasts twenty-five. Don’t negotiate this line item.
Brands matter at the margins. We use Sakrete for repair mixes and smaller pours, and specify known regional ready-mix suppliers for main slabs so the mix design (typically 3,500 to 4,000 PSI for a driveway) is documented.
What Concrete Driveways & Concrete Work Costs in Los Angeles, CA
Here’s the honest number up front, then what pushes it around:
| Line item | Typical range |
|---|---|
| Concrete driveway installation (2-car, standard) | $5,310 – $14,160 |
| Driveway replacement (demo + new pour) | $5,900 – $16,520 |
| Concrete walkway or patio pour | $4,130 – $12,980 (varies by area) |
| Driveway sealing (cure-protection coat) | $295 – $825 |
What moves a job from the low end to the high end: total square footage (a 400 sq ft single-car apron versus a 900 sq ft double run); existing condition (poor subgrade, old tree roots, or a failing slab that needs full removal); access (narrow driveways or tight lots add labor); finish selection (broom is cheapest, aggregate and stamp cost more); and permit and inspection scope when the pour meets the public right-of-way. A written estimate covers demo, haul-off, base, rebar, forms, the pour, finish, and cure compound. What it typically doesn’t cover: landscape repair, relocating irrigation or gas lines, and drainage hardware like channel drains or dry wells, which we price separately so you can see them.
See the difference
Before
After
Before
After
Before
AfterWhat Los Angeles Homes Specifically Do to This Job
LA’s construction rules are among the strictest in the country, and even a driveway gets pulled into the seismic conversation. On the flats, most of the stock is Spanish Colonial and Craftsman bungalows from the 1920s to the 1940s, plus 1950s – 60s stucco tract homes, and the concrete work is usually old and cracked from decades of settlement. In hillside neighborhoods – the Hollywood Hills, the Santa Monica Mountains, and slope lots off Mulholland – grading and drainage are the whole job. Heavy winter rain on steep, fire-scarred ground triggers debris flows, so we build the fall and channel drains to direct water off the slab and away from the foundation. Where the driveway meets the street, it may need a permit and a city inspection. Where the lot is under an HOA, there may be color and finish rules. And fire code in the WUI zones means ignition-resistant detailing increasingly matters, which is why we keep masonry borders and noncombustible edging on the table for hillside homes. We cover the full Los Angeles area, from Valley flat lots to tight hillside drives.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Concrete Driveways & Concrete Work in Los Angeles
Most take 4 to 7 working days, plus 7 days off-foot and 10 before you park a car on it. Rain and city inspection scheduling add a day or two; a full cure is about 28 days.
Only part of it is typically permit-triggered. If the pour meets the public right-of-way or changes drainage, expect a permit and inspection; a private driveway on your own lot away from the street generally doesn’t need one. We’ll tell you which applies to your property before any work starts.
Not when it’s from us, because we work from a written line-item quote and verify the ground before the price is locked. If we open the base and hit something unexpected like buried utilities or a failed subgrade, we stop and show you the change in writing before doing it. That’s how the 730-Day Done Right Promise stays honest.
Often yes, if the lines run where the slab won’t sit. When they do cross the pour path, they have to be relocated, and we route and price that separately so you know the number before the work, not after.
Every driveway we pour is covered by the 730-Day Done Right Promise on workmanship: if a finish, joint, or the pour itself fails because of how it was done, we make it right. Concrete is a material that can crack at the joints over time, so we set control joints to direct that, and we stand behind the work we control.
Get a Free Estimate for Concrete Driveways & Concrete Work in Los Angeles
Call (888) 427-1733 and we’ll schedule a free on-site estimate. A live person answers around the clock, so no voicemail and no waiting until Monday. We’ll walk the property, measure the run, check drainage and access, and hand you a written line-item price with the 730-Day Done Right Promise behind it. Get a fixed number before you commit.
If the driveway is part of a bigger exterior scope, our Driveway & Pavers in Los Angeles page covers the wider picture, and our Driveway & Pavers service covers the full range. Many homeowners pair concrete work with a Garage Conversion ADU in Los Angeles or a New Detached ADU in Los Angeles, since both need new drive access and a fresh apron.
Written by the team at Groundwork Construction Co.