A Groundwork company - serving Los Angeles, CA

Fence Installation Warning Signs Every Homeowner Should Know

Last updated November 17, 2026

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Fence Installation Warning Signs Every Homeowner Should Know

A fence that looks perfect on day one can fail structurally within 18 months, and in most cases the warning signs were there before the crew ever left the job site. The worst fence contractors in Los Angeles don’t show up with obvious red flags. They show up with low prices, a friendly handshake, and a one-page contract with three lines of text. The damage becomes visible months later when posts start leaning, panels cup and split, and gate hardware pulls loose from soft wood. This guide walks you through the warning signs before, during, and after installation, so you can tell the difference between a fence that lasts and one that needs to be torn out.

Call (888) 427-1733

Quick Answer

The biggest fence installation red flags are posts set too shallow (less than one-third of total post length in the ground), no permit pulled with the city, concrete mushroomed above grade instead of a proper below-grade footing, undersized or wrong-type fasteners, and a contract that doesn’t spell out post depth, material specs, warranty terms, or who is responsible if the work fails inspection. Catch these before signing and you avoid most of the $4,000 to $12,000 tear-out jobs we see across Los Angeles.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Table of Contents

Post Depth: The Structural Warning Sign Homeowners Miss

Post depth is the single most important structural factor in any fence, and it’s the one homeowners almost never check. In Los Angeles, we regularly see posts set 18 to 24 inches deep in a six-foot fence. That’s a structural liability, not a shortcut. The rule of thumb that experienced installers follow in this region is that the buried portion of the post should equal at least one-third of the total post length. For a six-foot fence, that means at minimum two feet of post below grade, and for anything over six feet, or in high-wind areas like the Sepulveda Pass corridor or the ridgelines above the San Fernando Valley, we recommend deeper.

Why does this matter in Los Angeles specifically? Because the soil here is not uniform. In the flats of the San Fernando Valley, you’ll hit expansive clay that swells when it rains and shrinks in dry months, which works a shallow post loose over two or three seasons. In the Hollywood Hills and the Santa Monica Mountains, you’re often dealing with decomposed granite or shallow bedrock where digging to depth is genuinely hard work. Contractors who want to save labor skip the depth and hope nobody notices. In coastal neighborhoods like Mar Vista, Venice, and Santa Monica, the wind load off the ocean and the sandy, less cohesive soil means shallow posts lean faster than anywhere inland.

Here’s what a homeowner should actually look for on the day the posts go in:

  • Hole depth before concrete pours. Ask politely to see one hole. A professional crew will have no problem showing you that the hole is at least one-third of the post length.
  • Gravel at the bottom. A six-inch bed of gravel under each post improves drainage and prevents frost or moisture heave. Missing gravel in a wet year is a warning sign.
  • Post plumb check. Every post should be plumb before concrete sets. If you see posts leaning on day one, they’ll be worse by year two.
  • Post material. Pressure-treated posts rated for ground contact (look for the UC4B or higher stamp) or steel posts are what you want. Standard untreated or above-grade-rated lumber buried in soil will rot from the inside out within five years.

If your installer won’t put a post-depth spec in writing, that alone is a warning sign worth taking seriously. The fence installation crews we work with in Los Angeles put a number on the contract before a single hole gets dug.

The Permit Problem Nobody Warns You About

Here’s a fact that surprises a lot of homeowners: a contractor who skips pulling a permit isn’t saving you money. They’re transferring liability onto you as the property owner. In the City of Los Angeles, fence permits are required for most fences over six feet in height and for any fence in a required front-yard setback zone or on a corner lot with sightline considerations. Different neighborhoods have different rules. A fence in the Hollywood Hills may trigger hillside and view-preservation rules that don’t apply in Sherman Oaks. A fence along a historic property in Angelino Heights has its own set of restrictions. A fence in a coastal zone in Pacific Palisades may require California Coastal Commission review.

What most homeowners don’t realize is that the permit requirement isn’t the contractor’s problem to absorb when they skip it. It’s yours. If a fence gets built without the required permit and later causes a dispute with a neighbor, obstructs a sightline, or fails a code inspection during a future home sale, you, the property owner, are the one who pays for the correction. That means tear-out, re-permit, and rebuild at your cost, not the contractor’s.

Warning signs to watch for around permits:

  1. “You don’t need a permit for this.” This is only sometimes true, and the contractor should be able to explain exactly why the specific fence in the specific location qualifies for an exemption.
  2. No permit number on the contract. A legitimate installer will either have pulled the permit already or will specify in writing who pulls it and when.
  3. Fence height creeping up to fence-plus-a-foot. A contractor who builds “right at six feet” and then adds a lattice top that pushes the total over six feet without a permit is putting you in violation without telling you.
  4. No inspections scheduled. If a permit is pulled, there’s usually at least one inspection. If your installer never mentions it, ask.

For a deeper look at how permitting, materials, and site conditions come together on a real Los Angeles fence project, our Fence Installation in Los Angeles page covers the full process from site assessment to final walkthrough.

Concrete Footings: Mushrooming Above Grade vs. Proper Below-Grade Set

Walk out and look at your fence posts after a job. If you see concrete domed up above the soil line like a mushroom cap, stop and take a photo. That “mushroom” is one of the most reliable warning signs of a fence that will fail structurally within a few years, and it’s a shortcut that’s easy to spot after the fact.

Here’s why. A proper footing is poured so that the concrete fills the hole below grade and stops roughly at or just under the soil surface, with the post absorbing drainage from above. When concrete is piled up in a dome above grade, two problems follow. First, the dome wicks standing water onto the base of the post, keeping the wood at the most vulnerable point continuously damp. Second, it signals that the hole was dug shallow, because contractors mushroom the concrete to make a shallow hole “look deeper” from the surface. A correct footing is invisible or nearly so after sod or gravel is replaced.

Other concrete warning signs in Los Angeles:

  • Concrete that’s clearly cracked around the post within 30 days. Rapid cracking often means the mix ratio was wrong or the pour was rushed in hot weather. LA’s long dry season means concrete cures fast, and a crew that’s not managing water content carefully will produce weak, brittle footings.
  • Dry-mix concrete “kicked in” rather than poured wet. Dry-pour concrete is a legitimate technique for some fence applications, but it requires the soil moisture to be right and the correct product. If you see dry powder scattered around the post base after the crew leaves, ask what product they used.
  • No gravel drainage bed underneath. Good footings sit on 4 to 6 inches of gravel. Looking for the gravel isn’t always possible after the pour, but it’s a fair question to ask before.
  • Concrete footings that appear different across the fence line. If some posts have clean footings and others look like they were poured by a different hand on a different day, someone rushed the job.

The footing is what holds everything above it. Skimp here and the rest of the fence, no matter how good the panels look, is going to depend on luck.

Panel Spacing and Fastener Types That Fail in LA’s Climate

Panel spacing and fastener choice are where cheap installations quietly fail, and the failures rarely show up in month one. They show up in year two, three, and five, after weather has done its work. In Los Angeles, we’re dealing with a genuinely challenging range of conditions. The inland valleys see 100°F-plus summer days and single-digit humidity that shrinks and warps wood. The coastal neighborhoods get salt air and marine layer moisture that corrodes cheap fasteners and warps untreated panels. Altadena and the foothill communities see the dry Santa Ana winds. There’s no single build spec that works across all of them.

Warning signs to look for around panels and fasteners:

  • Galvanized deck screws next to the coast. Standard galvanized fasteners will hold up fine inland, but in Santa Monica, Redondo Beach, and Playa del Rey, salt air will start rusting them within 18 months. Stainless steel is the safe choice within a few miles of the ocean, and any contractor who dismisses that for coastal work is telling you something about their standards.
  • Nails instead of screws on cedar or composite. Nails pull out over time under thermal cycling. Screws with the correct coating hold. If you see a fence built almost entirely with a nail gun, expect loose boards in two or three years.
  • Even spacing that’s not right for the material. Cedar planks need a small gap for seasonal swelling and shrinkage. Composite panels often need a specific clip system with prescribed gaps. Any contractor using the same spacing on every material regardless of brand or type is not reading the manufacturer’s spec.
  • Panels butted tight with no gap at all. In dry LA summers, wood will shrink and open gaps that look terrible. Installed correctly with the right gap, the fence breathes and stays tight.
  • Fasteners not matching the material brand. Reputable brands like Atlas, Tamko, Boral, or PGT specify approved fastener types and coatings for their products. A contractor mixing brands and fasteners freely is skipping the spec sheet.

In our experience, the fasteners alone account for a meaningful share of the tear-out jobs we’re called to correct in Los Angeles by year five. It’s the cheapest thing to get right and the most common thing to get wrong.

What a California Fence Contract Must Include

A fence contract in California needs to do more than name a price. It needs to lay out the specifics that give you recourse if the work fails inspection or needs correction. If you’re signing a one-page contract with a vague scope, you’re giving up most of the protection you’d otherwise have under California’s contractor licensing rules. The Business and Professions Code and the Contractors State License Board set expectations for what a written home improvement contract should contain, and a fence installation falls squarely into that category.

At minimum, a fence contract in Los Angeles should include:

  1. Contractor’s name, license number, and business address as registered with the CSLB. Verify the license independently before you sign.
  2. A detailed scope of work that specifies fence height, total linear feet, material types and brands, post spacing, post depth, gate locations, and hardware specs.
  3. A line-item price breakdown showing materials, labor, and any permit or disposal fees. Upfront pricing with no surprises means the number you see is the number you pay, and it’s in the contract in detail.
  4. Permit responsibility. Who pulls the permit, what the timeline is, and what happens if the permit isn’t approved as submitted.
  5. Payment schedule tied to milestones, not a large deposit up front. In California, the down payment on a home improvement contract is capped, and a contractor asking for 50% down is a warning sign.
  6. Warranty terms in writing. What’s covered, for how long, and what triggers a warranty claim.
  7. A three-day right to cancel, as required under California law for contracts signed at the home.
  8. Change order process. How changes are priced, who approves them, and how they’re documented.

The 730-Day Done Right Promise we back every Groundwork Construction Co. of Los Angeles project with is an example of what contract-level warranty responsibility looks like: if something isn’t done right, we make it right, for two full years after the final walkthrough. That’s the level of commitment a fence contract should reflect in writing, not in conversation.

Material Red Flags: What Cheap Materials Cost You by Year 2

Materials are where the “$18-a-foot” fence and the “$45-a-foot” fence look nearly identical on day one. By year two, the difference is obvious, and by year five, one is standing firm and the other is on a repair schedule. The money you save on a cheap fence gets spent on patching it, and it usually gets spent within the length of a typical homeownership cycle.

Material warning signs that predict failure:

  • Untreated wood where treated is required. Ground-contact-rated pressure-treated lumber is the standard for posts. Untreated or above-grade-rated lumber is a cost cut that shows up fast in soil contact.
  • Unknown brand materials with no manufacturer labeling. Trusted brands like James Hardie for composite panels, or Atlas or Boral for related exterior products, ship materials with clear manufacturer stamps and spec sheets. No labeling on the delivered materials is a warning sign.
  • Composite panels that flex under hand pressure. Quality composite, whether from a major brand or a mid-tier producer, will feel dense and stable. Panels that flex easily under thumb pressure will sag over time.
  • Lumber with excessive knots or visible warp at delivery. Wood is a natural material, and some variation is normal. But a pallet of visibly warped, knotty boards is a sign the crew bought from a discount lot without checking.
  • Cheap hardware and hinges on gates. Gates are the first part of any fence to fail. Cheap hinges sag within a year. Quality hinges, latches, and closers are the difference between a gate that swings true for a decade and one that starts dragging in month eight.

The material savings from cutting corners on any single one of these is small. The year-two and year-five repair costs, plus the possibility of a full tear-out, are not. When you’re pricing out a fence in Los Angeles, ask for the specific brand names in the quote and don’t accept generic “cedar” or “composite” as a full answer.

What to Watch For While the Crew Is On Site

A lot of the warning signs in this guide are things you can catch while the crew is still working. Watching the process doesn’t require technical knowledge. It requires being home and looking out the window a few times a day.

  1. First day: check the post holes before concrete. As soon as holes are dug, walk the line and look at depth. This is the one moment you can catch a shallow-post violation before it’s poured in.
  2. First day: check materials as they come off the truck. Look for manufacturer stamps, pricing labels, and whether the material matches what was specified in the contract.
  3. First day: check for gravel in the holes. A six-inch gravel bed under each post is a quick visual confirmation.
  4. Second or third day: check that posts are plumb before and after concrete sets. A four-foot level against any post gives you an instant read.
  5. Mid-build: check panel gap consistency. Eye down the fence line. Gaps should be consistent. Any board that’s visibly tighter or looser than its neighbors is a warning sign.
  6. Final day: check the gate. Open and close it several times. It should swing on a straight arc, latch cleanly, and not drag.
  7. Final day: check the cleanup. Concrete splatter on your pavement, leftover fasteners on the ground, holes not filled, and uncut board ends are all signs the crew rushed the finish.

Any installer who pushes back on a homeowner watching the work is telling you something. The best crews expect to be watched and are happy to answer questions as they go.

Post-Installation Checks in the First 90 Days

The first 90 days are when a fence settles into its site and when shortcuts start to show. This is the window when a warranty conversation is still fresh, and when most installers will respond quickly to any issue. After 90 days, a lot of contractors are harder to reach, and even the responsive ones are working from a longer queue. Doing a check pass in the first 30 and 90 days catches a lot of issues while a fix is still easy.

What to check and when:

  • Week 1: Walk the fence line and look for any panel that has visibly shifted out of alignment. Check for gaps that have opened up as materials acclimate. Check the gate swing and latch.
  • Week 4: Look at every post. A small amount of concrete cracking around the base can be normal settling. Deep cracks, or cracks that are widening, are a warning sign worth calling about.
  • Week 8 to 12: Check that panels haven’t warped or cupped. Check that no fasteners have backed out. Look for signs of water pooling near the base of posts, which suggests a drainage issue that needs correction before it becomes rot.
  • First rainy season: The first significant rain is the real test. Look for pooling under the fence line and check that no panels have warped or sagged after a wet-dry cycle. In Los Angeles, the first real rain after a fence install is usually the following winter, so keep an eye out.

If any of these checks turn up something, call the installer immediately and get the fix scheduled in writing. A contractor with a real workmanship warranty will respond. A contractor who dodges or gets defensive is confirming that the warranty was only ever on paper. This is exactly why we wrote the 730-Day Done Right Promise: the whole point is that the contractor stays accountable after the truck pulls away.

Common Mistakes to Avoid

  • Signing a one-page contract. If the entire agreement fits on one page, it can’t possibly cover the post depth, material specs, permit responsibility, and warranty terms you need to protect yourself.
  • Accepting a quote 40% below every other bid. Fence pricing in Los Angeles doesn’t compress by 40% honestly. The gap is post depth, material quality, or permits, and you’re the one who absorbs the difference when the fence fails.
  • Assuming permits don’t apply. In the City of Los Angeles, plenty of fences do require a permit. A contractor who tells you “the city never checks” is transferring that risk to you.
  • Choosing material without asking about the coast or valley. Stainless fasteners and coastal-rated materials matter in Santa Monica and Venice. Inland valley installations need a different spec for thermal movement. One-size-fits-all pricing across all of LA is a warning sign that the installer isn’t thinking about the site.
  • Not verifying the contractor’s CSLB license. It takes three minutes on the Contractors State License Board website, and it’s the single cheapest protection you have. Verify before signing.
  • Skipping the 30-day and 90-day post-install checks. The most expensive repairs are the ones that started as small issues during the first 90 days and nobody checked.
  • Paying a large deposit up front. California caps down payments on home improvement contracts for a reason. A contractor asking for half up front is putting the burden of their cash-flow problem on you.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

When to Call a Professional

Some fence issues are honest DIY fixes, like a sagging gate hinge or a loosened latch. Others are structural, and getting them wrong makes things more expensive later. Call a professional if you see posts that are visibly leaning or have started to separate from their footings, if concrete is cracking deeply or mushroomed above grade, if panels have warped or cupped within the first two years, if a fence was built without a permit and you need to get it into code compliance, or if you’re planning a new fence and want a written scope that includes post depth, materials, and permit responsibility before you sign anything. Groundwork Construction Co. of Los Angeles offers free estimates in Los Angeles and can walk your existing fence line to tell you what’s salvageable and what needs to be rebuilt from the posts up. Call (888) 427-1733.

Frequently Asked Questions

The Bottom Line

A fence is a 15- to 25-year investment when it’s built right, and a 2- to 5-year expense when it isn’t. The warning signs are almost never obvious on day one, which is exactly why they’re worth knowing. Post depth, permit responsibility, concrete footings, fastener choice for Los Angeles’s varied climate, and a detailed contract are the five things that separate a fence from a tear-out. If you’re planning a fence in Los Angeles and want a written scope, upfront pricing, and a workmanship guarantee that outlasts the truck pulling away, that’s what Groundwork Construction Co. of Los Angeles is here for. Our technicians bring up to 12 years of experience, every project is backed by the 730-Day Done Right Promise, and calls are answered by a live person 24/7. Call (888) 427-1733 for a free estimate, and if you’re considering other exterior upgrades alongside the fence, take a look at our Driveway & Pavers in Los Angeles and Home Additions & ADU in Los Angeles services, or start at the Groundwork Construction Co. of Los Angeles home page for a full scope of what we handle.

Written by the team at Groundwork Construction Co. of Los Angeles.

Need Construction help in Los Angeles? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch