Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in El Segundo, CA: What It Costs and How Fast It Goes In
A chain link fence in El Segundo typically runs $3,500 to $9,000 for a standard residential yard. Most jobs take one to three days on site: posts set on day one, mesh and gates hung by day three, concrete cured enough to load by the end of the week. The number moves with linear footage, height, gate count, and ground conditions. Call (888) 427-1733 and we’ll price your specific run.
How a Chain Link Fence Project Runs, Stage by Stage
We don’t hand you a vague “we’ll be out sometime Tuesday.” Here’s the actual sequence, so you know what happens and what you’ll be deciding, and when.
1. On-site measure and line walk (about 45 minutes)
We walk the property line with you, confirm corners, and check for buried irrigation, gas stub-outs, and low-voltage lighting. You decide the fence height (4, 5, or 6 feet) and where the gates land. This is also when we flag property-line questions early. In El Segundo, lots run tight, and a fence set six inches off the line can save a neighbor dispute later.
2. Permit and utility check (two to ten business days)
El Segundo runs its own building department, and a fence permit here moves through a small, detail-oriented plan-check rather than the county queue. We handle the application. If your line crosses a utility easement, we call for locates before anyone digs. You decide nothing at this stage except whether you want us to pull the permit or you’d rather do it yourself; most homeowners hand it to us.
3. Demo and layout (half a day to a full day)
Old fencing comes out, posts get marked at 8 to 10-foot intervals, and the string line goes up. If the old fence was set in concrete footings, breaking those out adds time and haul-away cost. This is the day you’ll want the side yard cleared, because we need a clean path for the auger and materials.
4. Post setting and concrete cure (day two)
Holes go 24 to 36 inches deep depending on height and soil, posts get set, and concrete goes in. Gates get heavier footings. The concrete needs about 24 hours before we hang panels, so this is where the job pauses. You decide the post cap style and whether you want tension bands set for future privacy slats.
5. Mesh, rails, and gate hang (day three)
Top rail, tension wire, mesh, and gate hardware all go on. We tension the fabric, check every gate for swing and latch, and walk the line with you before we leave. Most single-yard jobs are done in three working days. Anything over 200 linear feet or with three-plus gates typically stretches to a fourth day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
Chain link isn’t one product. Here’s what moves the spec sheet, and the honest trade-off on each.
- Gauge of mesh: 11.5-gauge is the light residential grade and the cheapest, but it dents and sags faster near a driveway or ball-chasing dog. 9-gauge costs more and holds its shape for years longer. In salt air near the coast, heavier wire also resists corrosion better because there’s more metal to lose.
- Coating: Galvanized steel is the budget pick but it rusts at cut ends and scratches. Vinyl-coated (usually green or black) adds roughly 15 to 25 percent to material cost and roughly doubles the service life in marine air. For El Segundo yards west of Sepulveda, we lean hard toward vinyl-coated.
- Height: 4-foot is the classic front-yard and side-yard pick. 5-foot and 6-foot are common for backyards and dog runs. Anything above 6 feet may trip a height review in this city, so we check before ordering material.
- Gate type and hardware: Walk gates with self-closing hinges and a fork latch are the standard. Drive gates need a heavier frame and often a drop rod. Each gate adds $250 to $700 depending on width and hardware.
- Top rail and tension wire: A top rail keeps the fabric from sagging across a long run. Tension wire at the bottom does the same job at ground level and keeps dogs from pushing under. Both are worth the small add.
- Privacy slats: Vertical or horizontal slats turn chain link into a visual screen. They cost real money (often several hundred to over a thousand depending on run length), and they catch wind, so post depth matters more with them installed.
What a Chain Link Fence Costs in El Segundo, CA
Expect $3,500 to $9,000 for a typical residential chain link fence in El Segundo. That’s the range for roughly 100 to 200 linear feet with one or two gates, in the grade most homeowners pick.
Here’s what pushes a job toward the low or high end:
- Linear footage: The single biggest variable. Doubling the run roughly doubles the material and labor.
- Existing fence condition: Old concrete footings that need breaking out and hauling away add cost. A sagging wood fence that comes down easy does not.
- Ground conditions: Rocky soil or a run that crosses a buried irrigation line or root system slows the auger and can add hours.
- Material grade: 9-gauge vinyl-coated with top rail and tension wire sits at the high end. 11.5-gauge galvanized is the budget end.
- Gates: Each walk gate adds $250 to $700. A wide drive gate with heavier framing adds more.
- Permit scope: A simple line-replacement permit is one thing. A fence that needs a height variance or crosses an easement takes longer to approve.
A written estimate from us itemizes the linear footage, gauge, coating, gate count, post depth, permit cost, and haul-away. What it typically does not include: relocation of a utility line, removal of a concrete retaining wall, or landscaping repair after the auger passes through a garden bed. When those come up, you hear about it before work starts, not after. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat El Segundo Homes Specifically Do to This Job
El Segundo is a small, largely built-out coastal city, and the fencing here reflects it. The residential stock is mostly 1940s and 1950s single-family bungalows on 5,000 to 6,000 square-foot lots built for aerospace workers, and a lot of those lots now have a fence line that’s been patched and re-patched for decades. There’s almost no vacant land, so fence work here is almost always a replacement or a reconfiguration, not a new build on a clean lot.
The marine layer off Santa Monica Bay is the other factor. Salt-laden air and persistent morning dampness corrode fasteners, tension bands, and gate hardware faster than inland LA. On a chain link fence, that means the cheap galvanized mesh is a short-lived choice west of Sepulveda, and vinyl coating plus stainless hardware is worth the upcharge. Coastal fog and onshore wind also drive gate hardware wear, so we check hinges and latches more carefully here than we would ten miles inland.
On the commercial side, work near the Raytheon campus on the east side comes with controlled-access and delivery-scheduling requirements that don’t apply a mile away. For residential chain link fences, the city’s small, detail-oriented building department is the practical reality: plan-check comments come back fast and personal rather than through a big county queue, so the permit stage usually moves quicker than homeowners expect. We cover all of El Segundo, ZIP 90245, and if your chain link work is part of a full Fence Installation in El Segundo scope across the whole yard, we’ll price both together.
If you’re also replacing the approach or reworking the front yard while the fence is out, homeowners often pair this with Concrete Driveways & Concrete Work in El Segundo or our Asphalt Driveways & Resurfacing in El Segundo so the whole frontage is done in one pass.
Serving El Segundo, CA – Our Local Coverage Area
We serve El Segundo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in El Segundo
Most residential chain link fence jobs in El Segundo take one to three working days on site, with the concrete cure adding about a day in the middle. The permit stage runs separately and is often the longer wait, typically two to ten business days depending on the city’s current queue. Call (888) 427-1733 for a realistic timeline for your yard.
Yes, most fence installations in El Segundo require a permit through the city’s own building department, and we pull it for you. The city runs a small, detail-oriented plan-check, so review usually comes back faster than through LA County. Height, setback, and easement rules apply, and we check all three before ordering material. Call (888) 427-1733 to walk through your specific line.
In most cases, yes. A chain link fence goes in on individual post holes spaced 8 to 10 feet apart, so we’re disturbing small circles of ground, not trenching a continuous line. Buried irrigation and lighting get flagged during the line walk so we can work around them. Gas lines and main utilities are a separate matter, and we call for locates before anyone digs. Call (888) 427-1733 and we’ll assess your run.
Most El Segundo chain link fence projects land between $3,500 and $9,000, with the final number set by linear footage, height, coating, gate count, and ground conditions. Vinyl-coated 9-gauge with top rail and tension wire sits at the high end; 11.5-gauge galvanized is the budget choice. Call (888) 427-1733 for an exact quote; estimates are free.
Every chain link fence we install is covered by our 730-Day Done Right Promise. If something isn’t done right, we make it right. That covers workmanship on posts, rails, mesh, and gate hardware for two full years. It’s one of the longest workmanship guarantees in the residential construction space. Call (888) 427-1733 to schedule your free on-site estimate.
Get a Free Chain Link Fence Estimate in El Segundo
Call (888) 427-1733 for a free on-site estimate on your chain link fence in El Segundo. A live person answers around the clock, and we’ll schedule a walk-through that fits your week. On the visit we measure the run, check the property line, confirm gate placement, and hand you a written line-item quote with the permit cost included. No pressure and no surprises. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.