Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Culver City, CA: What It Costs and How Fast It Goes In
A chain link fence in Culver City runs $3500 – $9000, and most residential yards are measured, permitted and installed in about two to four weeks from the day you approve the estimate. The fence itself goes up fast, often in a single visit. The waiting happens before that: surveys, city permits, and scheduling with the neighbors whose property line you share. Call (888) 427-1733 to set up a free on-site estimate.
How We Build a Chain Link Fence, Start to Finish
Chain link isn’t complicated, but it is unforgiving of shortcuts. A post set in loose soil or two inches off the property line will show up the first winter. Here’s the sequence we actually run, and where you make decisions.
- Stage 1: Site visit and line check (day 1, about 60 minutes). We walk the property, find your survey stakes or pull the recorded plat, and confirm the run. You decide the height (typically 4 ft for a side-yard divider, 6 ft for privacy along an alley-facing yard) and whether the fence sits on the property line or inside it by a few inches.
- Stage 2: Permits and utility locating (days 2 through 7, occasionally longer). Culver City requires a fence permit for anything over the height threshold, and we submit the application along with utility locating so nobody drives a post through a gas line or irrigation main. You sign the application; we handle the rest.
- Stage 3: Layout and demo (day of installation, first two hours). We string the line, mark every post at consistent 8-to-10-foot spacing, and remove any old fence, footings or vegetation in the way. Debris leaves the same day.
- Stage 4: Posts and concrete (day of installation, hours three through five). Holes get dug to depth and set with concrete footings, and chain-link posts need roughly 24 to 48 hours of cure before tensioning. This is the stage where the buried part of the job matters more than anything you’ll see.
- Stage 5: Rails, mesh and gates (return visit, half a day). Top rail, tension wire, mesh stretched and tied, and gates hung with proper swing clearance. You walk the line with us, and anything that isn’t right gets corrected before we leave.
You’ll be asked to decide three things in roughly this order: fence height and color, gate locations and widths, and whether you want privacy slats added. Everything else is on us, from the permit to the final tension check.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Choose Between
Chain link is rarely one product. The decisions you make here are what separate a fence that lasts 20 years from one that sags in five.
- Galvanized steel versus vinyl-coated. Bare galvanized is the budget choice and holds up well in our dry inland-tilted summers. Vinyl-coated (often sold as “color chain link” in black or green) costs a bit more but blends into landscaping and doesn’t leave rust streaks against stucco walls.
- Gauge of wire and pipe weight. Mesh comes in different wire gauges, and posts and rails come in different wall thicknesses. Thinner pipe is what fails first when a gate gets slammed or a car nudges the line. Ask for the heavier schedule on gate posts no matter what you choose for the run.
- Top rail versus tension wire. Top rail gives a clean, stiff line and pairs better with gates. Tension wire is less expensive and works fine for long, straight residential runs.
- Gate hardware. Hinges, latch and post reinforcement get abused more than any other part of a chain link fence. Self-closing latches are worth the small upgrade if kids or a dog use the gate daily.
- Privacy slats or a windscreen. Slats add cost and wind load. In Culver City’s gusty afternoons along the Sepulveda corridor, we spec posts one size heavier when slats go up.
Powder-coated systems from brands like Ameristar sit at the top of the residential price band; standard galvanized pipe and mesh from a regional supplier sits at the bottom and performs well in our climate when installed correctly.
What a Chain Link Fence Costs in Culver City, CA
The range for this job is $3500 – $9000. A straightforward side-yard run with one gate usually lands near the bottom; a full-perimeter fence on a corner lot with multiple gates and slats lands near the top.
- Linear feet and height: taller fence means longer posts, more concrete and more mesh, and costs rise roughly in step.
- Grade of materials: heavier gauge mesh and thicker pipe wall push the number up 15 – 25% but are usually the right call on gate posts.
- Terrain and soil: sloped yards, rock or hardpan, and old concrete footings slow the dig and add labor.
- Gates: each gate is a separate fabricated piece with its own hardware; wide double gates cost meaningfully more than a single walk gate.
- Permit scope: a permit is part of a properly done job, and its fees land inside our written estimate, not on top of it.
A written estimate from us lists linear footage, post spacing, gauge and pipe schedule, gate hardware, permit fees and cleanup as separate line items. What it typically doesn’t include is work that the site visit reveals: removing a buried block wall, relocating a sprinkler main, or repairing a stucco wall the old fence was anchored into. We’d rather you see those as real numbers before we start than discover them mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Culver City Properties Specifically Do to a Chain Link Job
Culver City‘s older residential blocks are where chain link gets interesting. The 1920s – 40s Spanish bungalows in Carlson Park and Sunkist Park were built on small lots with stucco walls and original wood lath underneath, and a lot of them still have a tired chain link fence from decades ago anchored into that stucco or into a shared block wall. When we pull the old posts out, we sometimes find the wall they were bolted to is what was holding the fence upright and the wall itself is soft at the base from years of ocean moisture creeping in. Corners like that get repaired before anything new goes in.
Permitting here rewards patience. Fence applications in Culver City move through a review that pays attention to property-line accuracy and to design review where a fence sits inside the Carlson Park Historic District, so getting the survey right at the start saves weeks later. Along the Sepulveda and Washington band, the 1950s – 60s ranchos and dingbats more often have simple alley-facing chain link that just needs replacing, and those jobs run faster.
If a chain link fence is part of a larger yard rebuild, homeowners often pair this with Fence Installation in Culver City upgrades, a new gate and approach, or with Concrete Driveways & Concrete Work in Culver City when the fence line and the driveway edge are being rebuilt together. For a broader look at what our Fence Installation service covers, we’re glad to walk you through the options.
Serving Culver City, CA – Our Local Coverage Area
We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Culver City
About two to four weeks end to end, with the actual install taking one to two visits. Most of that time is permit review and utility locating; the digging, setting and stretching happen over a couple of working days. Call (888) 427-1733 for a firmer timeline once we’ve seen the line.
Yes, for fences above the city’s height threshold, and we pull it for you. Standard side and rear yard fences often sit within what the city allows without review, but height, corner-lot visibility triangles and historic-district properties can require more, and we sort that out during the site visit.
Usually yes, with utility locating beforehand. Posts are set around irrigation runs and meter boxes, but old clay sewer laterals and shallow gas lines do sometimes sit exactly where a post wants to go. Locating before we dig is what keeps those surprises off your invoice. Call (888) 427-1733 and we’ll talk through your yard.
Generally yes. Chain link typically costs less per foot than wood or ornamental metal, which is why it’s the go-to for side yards and alley lines. Our local range is $3500 – $9000 depending on footage, height, gates and finish.
Every chain link fence we install is covered by our 730-Day Done Right Promise, which means if a post shifts, a gate sags or the mesh slackens, we come back and make it right. Materials carry their manufacturer’s warranties on top of that. Call (888) 427-1733 to schedule your free on-site estimate.
Get a Free Chain Link Fence Estimate in Culver City
If you’re weighing a chain link fence for a side yard, alley line or full perimeter in Culver City, we’ll come out, measure, and hand you a written line-item estimate with no surprises. Call (888) 427-1733 and a live person answers, day or night. We’ll ask about the line, the gates and the timeline, then schedule your on-site visit. Estimates are free, and calling commits you to nothing.
Written by the team at Groundwork Construction Co..