Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Driveway & Pavers Across Culver City
Culver City homeowners call us because driveways here aren’t a simple pour-and-go. From the Spanish bungalows of Carlson Park to the post-war ranchos near Sepulveda and Washington, the ground under your driveway has a story, and it usually isn’t a good one. We know the streets, the soil, and the design-review politics well enough to price a job honestly before we start. Call (888) 427-1733 for a free estimate and we’ll walk the driveway with you.
Why Groundwork Construction Co. of Los Angeles Is Culver City’s Preferred Driveway & Pavers Company
Our Driveway & Pavers team works Culver City constantly, and that local repetition matters. We know which blocks on the east side of Carlson Park sit over old oil-stained base and which Sunkist Park lots drain toward the garage instead of the street. That kind of thing doesn’t show up until you cut a section out and look.
Calls are answered by a live person, 24/7 – not a voicemail box that pages someone Monday morning. When we schedule a site visit in Culver City, we show up when we said we would, in uniform, background-checked, and ready to talk scope instead of handing you a vague number scribbled on a business card.
Every driveway, paver patio, and walkway we build is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right – in writing, for two full years. That’s the part most Culver City homeowners have never been offered before, and it’s the reason people refer us to their neighbors.
Our technicians have up to 12 years of experience with pavers, concrete, and asphalt. That shows up in the details: proper subbase compaction, correct slope away from the foundation, and joint sand that actually stays put.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Driveway & Pavers Services in Culver City
We handle the full driveway and hardscape scope, but these four services come up most often in Culver City’s older neighborhoods.
Paver Driveways
Paver driveways in Culver City run $7,000 – $18,000 for a typical two-car driveway, and they’re the right call for homes where you want the driveway to match the Spanish Colonial character of the block. We set them on a properly compacted base, not directly on whatever old concrete is sitting there. If your property falls in the Carlson Park Historic District, we check the design review requirements before a single paver is ordered.

Concrete Driveways & Concrete Work
Concrete driveway installation in Culver City runs $4,500 – $12,000. Concrete is the workhorse choice for the post-war ranchos and dingbats near Sepulveda, and it’s also where we see the most hidden problems. When we cut out old concrete, we find out fast whether the original slab went down over uncompacted soil or an old oil-stained base – and if it did, the subbase gets recompacted or replaced before we pour. That step is why our concrete stays put.

Asphalt Driveways & Resurfacing
Asphalt paving runs $3,500 – $9,000 in Culver City. For longer driveways or properties where budget is the priority, asphalt is a solid, repairable surface. Resurfacing over a sound base can save real money, but only when the subbase is intact. We check before we recommend it.

Driveway Repair & Replacement
Full driveway replacement in Culver City runs $5,000 – $14,000. When you see cracking near the garage, uneven settling, or a slab that’s started to heave, replacement is usually the honest answer – patching a failed subbase just delays the same crack. Because many of these homes are 1920s – 40s bungalows with original clay tile roofs and brittle wood lath under the stucco, we also protect the roofline during demo. Vibrations from excavation can crack tile or loosen lath, and that becomes an unexpected structural repair if nobody planned for it.
Trusted Brands We Service in Culver City
We work with a curated set of material partners – Sakrete for concrete mixes and base prep products, and Belgard for paver systems – so you choose quality, not just whatever’s on the shelf. We don’t stock parts locally and we don’t claim to. What we do is source the right material for the job and get it to your Culver City property on schedule, so a driveway project doesn’t stall waiting on a delivery. The brands we partner with are the ones that hold up to coastal moisture and heavy use, and they’re the ones we’re comfortable backing with a 730-Day Done Right Promise.
Common Driveway & Pavers Problems We See in Culver City Homes
- Efflorescence and spalling on unsealed concrete and pavers. Coastal moisture wicks through joint sand and unsealed slabs, especially where original 1920s – 40s stucco meets the driveway edge. Fine white mineral bloom and surface flaking are the first signs, and sealing runs $250 – $700 in Culver City to stop the damage from spreading.
- Uneven settling and cracking near the garage. Years of moisture and poorly compacted original base cause slabs to drop and crack. We cut out a section to inspect the subbase before we quote, because a replacement price built on a bad base is a quote you’ll regret.
- Paver heave and shifting. When base prep was rushed or drainage is wrong, pavers lift and separate at the joints within a few seasons. Correct compaction and slope are the fix, and they have to be done right the first time.
- Roof and lath damage during demo. On Carlson Park and Sunkist Park bungalows, heavy clay tile and brittle wood lath are vulnerable to excavation vibration. We plan protection into the job so a driveway project doesn’t turn into a roof repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Driveway & Pavers in Culver City, CA
Straight numbers, no vague “it depends” without a range to back it up. These are the Culver City ranges we work from, and your written estimate is line-itemed so you can see exactly where the money goes. What moves the number is subbase condition, driveway square footage, materials, and whether design review applies. A surprise found once we open the ground gets priced and approved in writing before we touch it – the number you see is the number you pay. Call (888) 427-1733 for a free estimate.
| Service | Culver City Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
We also offer 0% financing for 18 months and $1,000 off projects over $10,000, so a driveway replacement doesn’t have to wait.
We Also Serve Cities Near Culver City
Our Driveway & Pavers in Culver City work reaches the surrounding area too – Marina del Rey, Santa Monica, El Segundo, and Los Angeles are all within easy range. The same coastal moisture, older homes, and tight lots that define Culver City jobs show up in these neighboring cities, and we price them the same honest way.
Serving Culver City, CA – Our Local Coverage Area
We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Driveway & Pavers in Culver City
Often yes, if your visible changes – scoring pattern, border color, or material – fall within the Carlson Park Historic District, the city’s Cultural Affairs Commission design review can require sign-off even for minor facade changes. We check before ordering materials so you don’t get a change order mid-job. Call (888) 427-1733 and we’ll walk your property’s specific requirements.
Usually because the base wasn’t properly compacted or the slope lets water pool under the pavers. Coastal moisture in Culver City makes bad base prep fail faster than it would inland. We check subbase and drainage before recommending a paver layout, and our 730-Day Done Right Promise backs the work if something lifts.
Only if the existing concrete is sound, level, and drains correctly – and in Culver City’s older neighborhoods, that’s less common than it sounds. Overlay on a cracked or settled slab just transfers the failure upward. We cut and inspect before we’ll recommend an overlay. Call (888) 427-1733 for a free look.
Most full driveway replacements in Culver City require a permit, and in the historic district they may also trigger design review. We pull the permits and handle the inspections as part of the job. That’s part of upfront pricing – no surprise permit line items once work starts.
Stamped concrete is a single poured surface patterned to look like stone; pavers are individual units set in joint sand that can be lifted and reset individually. For a Spanish bungalow where you want a warm, period-appropriate look and repairability, pavers often hold up better to the coastal moisture and small-lot drainage Culver City homes face. Stamped concrete runs lower on labor but cracks as one piece. Call (888) 427-1733 for a side-by-side estimate.
Get Your Free Driveway Estimate in Culver City
Whether you’re in Carlson Park, Sunkist Park, or anywhere across the 90232 and 90230 ZIP codes, we’ll walk your driveway, inspect what’s underneath, and put a real number in writing – with the 730-Day Done Right Promise behind it and 0% financing for 18 months available. Calls are answered by a live person, 24/7. Call (888) 427-1733 to schedule your free estimate.
Written by the team at Groundwork Construction Co.