Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Culver City: What It Takes and What It Costs
Driveway repair & replacement in Culver City typically runs $5,000 – $14,000 for a full replacement, with most single-drive projects finished in two to four working days once the crew starts. Small fixes like crack routing, panel replacement or edge repair land far lower. Call (888) 427-1733 and we’ll give you an upfront number before anyone touches the slab.
How the work actually runs, day by day
We don’t hand you a vague “we’ll take care of it” and disappear. Here is the real sequence for driveway repair & replacement, and where you make decisions.
Stage 1: On-site measure and evaluation (about 45 minutes)
We walk the slab, check thickness at the edges, look for base failure under the apron, and measure actual square footage and the slope toward the street. You decide right here whether we’re repairing sections or replacing the whole drive. If the base is gone under more than a third of the surface, a patch is money down the drain – we’ll tell you that straight.
Stage 2: Permits and utility marking (3 – 7 business days)
Most full replacements in Culver City need a right-of-way or driveway-approach permit and a call to 811 to mark gas and electric. You sign the approval and we handle the filings. This stage is hands-off for you, but it’s the one that decides your start date, so don’t expect concrete on day one.
Stage 3: Demolition and haul-off (1 day)
The old surface comes out – concrete, asphalt, whatever’s there – down to the subgrade. We haul the debris off. You decide now on base depth for heavier vehicles and on any drainage correction, like a channel drain or regrading for a low spot.
Stage 4: Base prep and forming (1 – 2 days)
We compact the subgrade, lay and compact the aggregate base (usually 4 to 6 inches), and set forms to your finished grade. This is the unglamorous step that determines whether the driveway holds up for 20 years or cracks in two. You confirm the pour height against your garage apron and the crown for water runoff.
Stage 5: Pour or lay, finish, and cure (1 – 2 days, plus cure time)
Concrete gets poured, screeded, finished, and jointed. Pavers get set on the compacted base. Either way you get a written walkthrough on curing – no driving on concrete for about 7 days, no heavy loads for longer. The finish decision, broom, exposed aggregate, or a stamped pattern, happens before this stage, not during it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Standard concrete (broom finish): The workhorse. Holds up well, easy to maintain, and the most economical at the $4,500 – $12,000 range for a full install. Suits most Culver City lots.
- Stamped or decorative concrete: Adds a pattern – flagstone, brick, slate looks – for visual punch at the entrance. Costs more than plain concrete and needs resealing every few years.
- Concrete pavers: Higher upfront ($7,000 – $18,000), but individual units can be pulled and reset if one cracks or settles. Good where tree roots or soil shifting are a worry.
- Asphalt: The budget option at $3,500 – $9,000, warmer underfoot, but needs resealing every couple of years and doesn’t last as long as concrete in heavy sun.
- Repair-only: Crack routing and filling, panel replacement, or edge repair for $500 – $1,800 when the damage is contained. Worth it only if the base is sound.
We’ll match the material to your house and your budget, not push the most expensive option. The trade-off is real: pavers cost more but repair cheaper; asphalt costs less but ages faster.
What Driveway Repair & Replacement costs in Culver City, CA
Full driveway replacement in Culver City runs $5,000 – $14,000. Concrete driveway installation sits at $4,500 – $12,000, paver driveway installation at $7,000 – $18,000, and asphalt paving at $3,500 – $9,000. Sealing alone is $250 – $700.
What pushes a job to the high end:
- Size: A tight single-car drive versus a wide double-car drive can double the square footage and the price.
- Existing condition: Base failure means hauling out old material and rebuilding the subgrade, not just resurfacing.
- Drainage work: A channel drain, culvert, or regrade adds cost.
- Material grade: Decorative finishes and pavers cost more than plain concrete.
- Permit scope: Right-of-way or approach permits add time and fees.
A written estimate covers demo, haul-off, base prep, materials, and finishing. It does not usually cover unexpected utility conflicts or major drainage corrections – we flag those before work starts, and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Culver City homes specifically do to this job
A lot of the driveways we work on here front 1920s – 1940s Spanish bungalows in Carlson Park and Sunkist Park, where the original pour has been patched so many times it’s more patch than slab. Those narrow lots and clay-adjacent soil mean water pools against the garage apron, and the front setback is often too tight for equipment, so small machines and hand work stretch demolition longer. On the flip side, the post-war ranchos near Sepulveda and Washington often have wider, flatter drives that are simpler to replace. The split here is real: a fast-track concrete job near the studios at Ivy Station plays by different rules than a preservation-sensitive repave in the Historic District. We cover the whole of Culver City and know which blocks need the extra care.
Serving Culver City, CA – Our Local Coverage Area
We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Driveway Repair & Replacement in Culver City
A full replacement usually takes two to four working days of active work, plus 3 – 7 business days for permitting and about 7 days of concrete cure before you drive on it. A contained repair can finish in a single visit. Call (888) 427-1733 for a timeline on your specific drive.
Yes, most full replacements that touch the public right-of-way or driveway approach require a permit, and we handle the filing. Purely cosmetic repairs or sealing generally don’t need one. Call (888) 427-1733 and we’ll tell you what your job needs.
Often yes, if the base is sound and the damage is contained to a few panels or cracks. Once base failure spreads under a third of the surface, patching just delays the inevitable. Call (888) 427-1733 and we’ll give you an honest read on repair versus replace.
Full replacement runs $5,000 – $14,000; contained repairs are far less at $500 – $1,800. Material, size, and drainage corrections move the number most. Call (888) 427-1733 for an exact quote – estimates are free.
Every driveway project is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (888) 427-1733 to talk through what’s covered.
Homeowners often pair a driveway replacement with ADU Site Prep & Utilities in Culver City when a new unit is planned, or with a Junior ADU & Interior Conversion in Culver City when the garage is being reworked. For the wider scope, see our Driveway & Pavers service and the full Driveway & Pavers in Culver City page.
Get a free estimate for your Culver City driveway
Call (888) 427-1733 to schedule a free on-site estimate for driveway repair & replacement in Culver City. A live person answers any hour – no voicemail, no waiting until Monday. We’ll walk the slab, measure, and hand you an upfront written number, plus options for 0% financing for 18 months and $1,000 off projects over $10,000. No surprises.
Written by the team at Groundwork Construction Co.