Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Manhattan Beach, CA: What the Job Actually Takes
Sliding and patio door replacement in Manhattan Beach typically runs $4,200 to $14,000 installed, depending on opening size, glass package, and whether the wall, header, or track need rebuilding. Most single-opening swaps take two to three days from demo to final seal. We’re Groundwork Construction Co., and we handle the whole sequence, from permit paperwork to the last bead of marine-grade caulk. Call (888) 427-1733 for a free on-site estimate.
How We Run a Sliding & Patio Doors Project, Stage by Stage
Every opening is different, but the sequence doesn’t change much. Here’s what happens and when you’ll be asked to weigh in.
Day 1, morning: tear-out and inspection. We pull the old slider, then look at what’s behind it. On Manhattan Beach homes near the water, the rough opening almost always has surprises: corroded fasteners, rotted sill framing, a header that was notched for a previous remodel. This is where the schedule gets honest. We photograph what we find and show you before anything gets rebuilt. You decide at this point whether to fix the frame properly or push ahead to a simple reset.
Day 1, afternoon: framing, flashing, and rough-in. The rough opening gets squared, the sill pan and flashing go in, and if the track sits at grade we set the threshold correctly for drainage. Skipping this step is the single most common reason patios leak in a January storm, and it’s not optional on our jobs.
Day 2: set, shim, and level the panel. The new slider goes in, gets shimmed for weight, and the rollers and track are adjusted so the panel glides without binding. We check the latch, the screen track, and the lock geometry. You’ll confirm which panel slides (left or right) at order time, and here we confirm the hardware feels right.
Day 3: insulation, trim, sealing, and finish. Spray foam into the gaps, interior trim and casing, exterior sealant and backer rod, and a final weather test with a hose. If you’re doing a full Windows & Doors in Manhattan Beach scope across multiple openings, we sequence this one last so the door doesn’t get hammered by other trades.
Same day or next morning: final walk and paperwork. We test the door a dozen times, hand over the warranty packet, and file the inspection sign-off if one was required. Total elapsed time on a standard single-unit swap is two to three working days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Pick Between
The bigger choices on sliding & patio doors aren’t the panels, they’re the frame, glass, and hardware line. Here’s the honest trade-off for each.
- Vinyl frame. Cheapest, lowest maintenance, no painting. Holds up to salt air well but can’t be colored beyond factory finishes and feels lighter in the hand. Best for rentals and back-of-house openings.
- Aluminum frame with thermal break. Slimmer sightlines and stronger for wide spans, which matters on the big beachfront walls. Thermal break is essential; without it you’ll get condensation on cool mornings.
- Fiberglass and clad wood (Andersen, Marvin). Premium feel and the best options for custom sizes and colors. Clad wood needs occasional care on any exposed edge, and the price is the high end of the range.
- Glass package. Tempered on any door is code. Low-E, argon, and laminated glass add cost but matter on the west-facing sliders that take afternoon sun off the water all year.
- Hardware and track. Stainless rollers and marine-grade hardware are worth the upgrade near the beach. Standard galvanized rollers are the first thing to seize.
- Configuration. Two-panel slider, three-panel, pocket slider, or a multi-slide system. Multi-slide is the big budget mover and often needs a structural header change.
What Sliding & Patio Doors Cost in Manhattan Beach, CA
Expect $4,200 to $14,000 for a complete sliding or patio door installation in Manhattan Beach, with the middle of that range being a two-panel slider on the back of a 1950s bungalow.
| Line item | Typical range |
|---|---|
| Standard two-panel slider, vinyl | $4,200 – $7,500 |
| Fiberglass or clad wood slider | $7,000 – $11,000 |
| Multi-slide or pocket door system | $10,000 – $14,000+ |
| Sill/frame rebuild (rot, corrosion) | $600 – $2,800 |
| Hardware upgrade to stainless | $250 – $700 |
Five things push a job to the high end: size and span (a 12-foot opening needs a header you may not have), existing condition (rotted sill framing on a raised-foundation cottage adds a rebuild day), structural work (widening an opening means a header and a permit), glass package (laminated and Low-E add real cost), and permit scope (an opening change is permitted work, a like-for-like swap in the same opening often isn’t).
Our written estimate is line-item, with the number you see being the number you pay. What’s not included unless we say so: structural repair beyond the header, stucco patching that runs past the immediate opening, and any painting you’d rather do yourself. No-hassle upfront pricing means no change orders mid-job unless the scope genuinely changed and you approved it. 0% financing for 18 months is available, plus $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Manhattan Beach Homes Specifically Do to This Job
The salt air on the sand-adjacent streets west of Highland eats through galvanized fasteners and untreated steel hardware within a few years, so we spec stainless rollers, stainless hinges, and marine-grade screws on every opening we touch here. That’s a real cost difference at the material line and a real service-life difference five years out. On the surviving 1950s beach cottages, the framing is often raised-foundation with stucco and wood, and a slider opening in that wall usually has some moisture damage in the sill; that’s not a scare tactic, it’s just what we find when the old unit comes out. Rain here concentrates into winter storms, so flashing and drainage matter more than the door’s R-value on most of these jobs. Many rebuilds in the Gaslamp and Strand blocks pair a new slider with a large glazed opening, and that’s where a structural header becomes part of the conversation. If you’re pulling other trades in alongside this, many homeowners in Manhattan Beach pair sliding or patio door work with Fence Repair in Manhattan Beach or a fresh Paver Driveways in Manhattan Beach project while the house is already getting sealed up.
On permitting: a like-for-like replacement in the same rough opening usually doesn’t need a permit, but widening an opening, adding a multi-slide, or changing the header does. We pull the permit, we pass the inspection, and we don’t hide that scope in the line-item estimate. If your project is part of a full remodel, our Windows & Doors service covers the wider scope, and our coverage across the region includes Manhattan Beach and the surrounding coastal neighborhoods.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Sliding & Patio Doors in Manhattan Beach
Two to three working days for a standard single-unit swap; four to five if the sill or frame needs a rebuild. Multi-slide systems with a new header can run a week. You’ll have the door sealed and usable by end of day one in most cases, though interior trim and paint come on the final day. Call (888) 427-1733 for a schedule estimate tailored to your opening.
A like-for-like replacement in the same opening usually doesn’t require a permit; changing the opening size, adding a multi-slide, or altering the header does. We verify the permit requirement with the local building department before we order materials, so there are no surprises after the door shows up. Call (888) 427-1733 and we’ll walk you through what your specific opening calls for.
Yes, in most cases. If the rough opening is the same and no wall is being widened, the door swaps in with no plumbing or structural impact. The one structural element that can come into play is the header, and we check that before quoting. Call (888) 427-1733 to schedule a free on-site look at your opening.
Sliding and patio door installation in Manhattan Beach typically runs $4,200 to $14,000, with vinyl two-panel units at the low end and multi-slide or clad-wood systems at the top. Sill rebuilds, stainless hardware upgrades, and widening the opening each add to the bottom line. Call (888) 427-1733 for an exact quote; estimates are free.
Every sliding & patio doors job we do is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right, in writing, for two full years after we finish. Manufacturer glass and frame warranties run separately and we hand over the paperwork. Call (888) 427-1733 to start with a free estimate.
Get a Free Estimate on Sliding & Patio Doors in Manhattan Beach
Call (888) 427-1733 to schedule a free on-site estimate for sliding & patio doors in Manhattan Beach. We’ll measure the opening, check the framing and header, confirm the permit requirement, and hand you a written line-item quote before you commit to anything. Calls are answered by a live person, around the clock. No pressure, no pitch: just a real number and the 730-Day Done Right Promise behind it.
Written by the team at Groundwork Construction Co.