Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Manhattan Beach, CA: What to Expect
Walk-In Showers & Shower Remodeling in Manhattan Beach typically runs $4,500 – $12,000 for a new walk-in shower and $9,000 – $28,000 when the shower is part of a wider bathroom renovation, with most showers built in 2 to 3 weeks of actual on-site work. The job means removing the old tub or shower pan, rebuilding the waterproofing and drainage, and setting tile or a solid-surface surround into a curbless or low-curb layout sized to your space. Call (888) 427-1733 to book a free on-site estimate before you commit to a layout or a finish.
The Five Stages We Work Through On Every Manhattan Beach Shower
A shower looks simple until the wall opens up. Here’s the sequence we follow on a Manhattan Beach job, with the timing you can plan around.
Stage 1: Walkthrough and Layout Decision (Day 1, About 90 Minutes)
We measure the existing pan, check the drain location, and confirm what’s behind the wall. You decide the footprint (curbless versus a 4-inch curb), the door style, and whether a bench or niche is going in. This is also when we tell you what the plumbing rough-in tells us about moving the drain or the valve, since that decision drives everything downstream.
Stage 2: Protection, Demo, and Rough-In (Days 2 – 3)
Floors get protected, fixtures come out, and the old tile, backer, and pan go to the dumpster. Once the wall is open we can see whether the framing is sound, whether the old moisture barrier failed, and whether the valve body needs replacement. If you’re adding a bench or moving the drain, the rough plumbing and blocking happen now, and this is when the inspector sees the work if your job requires a permit.
Stage 3: Waterproofing and Pre-Slope (Days 3 – 5)
This is the stage that decides whether the shower lasts 10 years or 40. We build the pre-slope for drainage, then a bonded waterproofing membrane or a foam shower system, then a flood test where the pan holds water for 24 hours so we know the membrane is watertight before a single tile goes down. You don’t see this layer when it’s done, but it’s the one that matters most.
Stage 4: Tile, Stone, or Solid Surface (Days 6 – 10)
Setting the walls, floor, niche, and bench takes roughly 4 to 5 working days depending on the material. Large-format porcelain moves faster than a mosaic with a lot of cuts; natural stone takes longer and needs sealing. You’ll want to have the tile on site by day 4 so the schedule doesn’t stall waiting on a special order.
Stage 5: Glass, Trim, and Final Walkthrough (Days 11 – 14)
The glass enclosure gets templated once the tile is set, then installed, along with the shower valve trim, drain cover, and any grab bars or niche lighting. We do a full water test with you in the room, check the door sweep and the slope, and hand over the care instructions for the finish you chose. Call (888) 427-1733 if you want to walk through a shower we’ve built recently before you start.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Every decision here has a trade-off. Here’s what actually comes up on a Manhattan Beach job.
- Curbless vs. low-curb: A curbless entry with a linear drain looks the cleanest and is the easier choice for aging in place, but it requires the floor to be recessed or the whole bathroom floor to be raised, which adds framing and cost. A 4-inch curb is faster and cheaper, though it’s a step you’ll live with every day.
- Tile vs. solid-surface surround: Large-format porcelain (12×24 or larger) is the standard for a clean contemporary look and runs around $2,000 – $4,500 in material for a typical shower. A solid-surface panel system goes in faster, has fewer grout lines, and is easier to clean, but it limits your design options and often costs more on small jobs.
- Frameless glass vs. framed: Frameless 3/8-inch glass is the finish most Manhattan Beach homeowners want, and it’s a meaningful line item (roughly $1,500 – $3,500 depending on size and hardware). A semi-frameless door saves money but shows more metal.
- Niche, bench, and seat: A recessed niche is a small add (a few hundred dollars); a built-in bench or corner seat is a framing and waterproofing change that pushes the job up by $500 – $1,200 depending on size.
- Fixtures and finishes: Kohler and similar brands in a brushed nickel or matte black finish are the most common picks. A thermostatic valve with a rain head is a popular upgrade but needs a different rough-in, so decide before the wall closes.
What Walk-In Showers & Shower Remodeling Costs in Manhattan Beach, CA
In Manhattan Beach, a walk-in shower build runs $4,500 – $12,000. A shower replacement in an existing footprint lands at $3,000 – $8,500. A full bathroom remodel with the shower as the centerpiece comes in at $9,000 – $28,000. These are real ranges, not teasers, and the low end is a straightforward tile shower in an existing drain location with stock finishes.
What pushes a job toward the high end:
- Moving plumbing: Relocating the drain or valve adds plumbing rough-in, a permit amendment, and inspection time, which can add $1,500 – $3,500.
- Curbless conversion: Recessing the subfloor or raising the bathroom floor is a structural change, not a cosmetic one, and it’s often the single biggest cost swing.
- Material grade: A mosaic marble wall with a linear brass drain can double the tile and trim budget versus large-format porcelain.
- Permit scope: A like-for-like replacement may not require a permit; moving plumbing or changing the footprint typically does. We confirm this with the city before the contract is signed.
- What’s underneath: Older framing, failed waterproofing, or water-damaged subfloor found at demo adds repair work you can’t see in an estimate until the wall opens.
Your written estimate is line-item and fixed. What you see is what you pay unless you approve a change order in writing, and every project carries the 730-Day Done Right Promise. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months. Call (888) 427-1733 for an exact quote on your shower, estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Manhattan Beach Homes Specifically Do to a Shower Job
Most of the showers we build here are inside 1950s beach cottages on raised foundations, or inside the custom contemporary homes that have replaced them. That history matters. In the older homes, behind the tile you often find a failed moisture barrier and framing that’s been quietly taking on water for years, especially on the ocean-side walls where marine-layer humidity never fully dries out. The salt air west of Highland and around the Gaslamp and Strand area corrodes the hardware fast, which is why we specify stainless or marine-grade fasteners and finished trim, and why we steer clients away from untreated steel on a shower door frame.
Permitting here reflects the city’s strict coastal zoning. A shower replacement in the same footprint is often a quick approval; anything that moves plumbing, changes the floor area, or touches structure can require plan review and an inspection on the rough-in before the wall closes. We handle that paperwork before the first day of demo so the schedule doesn’t stall. If your shower is part of a full Bathroom Remodeling in Manhattan Beach, the same permit pulls cover both scopes and neighbors on the same schedule.
Manhattan Beach isn’t a city of incremental repairs the way El Segundo or Redondo Beach is. The typical job is a gut remodel or a full tear-down, so your shower is often one piece of a much larger project. That makes sequencing matter, and it’s why we plan the rough-in for the shower around the plumbing and electrical work for the rest of the room. We serve the whole of Manhattan Beach, including both ZIP codes 90266 and 90267, and homeowners often pair this work with Roof Replacement & Installation in Manhattan Beach and Metal Roofing in Manhattan Beach when the bathroom is part of a broader renovation.
The local construction market also matters. In a custom-build neighborhood where architect-grade finishes are the norm, an off-the-shelf shower pan can feel like a mismatch in a $5 million home. Our team draws on up to 12 years of experience matching premium finishes to the house, whether the shower surround is a large-format slab in a Dvele-style modern build or a tile and stone shower in a cottage. That’s why we work from our broader Bathroom Remodeling playbook on the sheetrock and framing side, and then treat the shower itself as its own small, closely sequenced job.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Manhattan Beach
Most walk-in shower builds take 2 to 3 weeks of on-site work, from demo day to the final glass install. The schedule moves fastest when the tile and glass are ordered before demo starts; a special-order stone or a custom glass shape can add a week of lead time, so plan on 3 to 4 weeks total for those. Call (888) 427-1733 and we’ll map the timeline to your material picks.
A like-for-like shower replacement in an existing footprint usually does not require a permit; moving the drain, the valve, or the wall framing typically does. Because Manhattan Beach’s coastal zoning is strict, we confirm the permit scope with the city before we quote, so there’s no mid-job surprise. Call (888) 427-1733 and we’ll tell you which category your job falls into.
Yes. A shower can be rebuilt in the existing footprint with a new pan, waterproofing, tile, and glass, and no plumbing or structural change. That’s the fastest, most predictable version of the job and it lands at the lower end of the range, around $3,000 – $8,500. Call (888) 427-1733 to see whether your layout works without relocating the drain.
A standalone walk-in shower runs $4,500 – $12,000, and a full bathroom remodel that includes the shower runs $9,000 – $28,000. The price is driven by whether plumbing moves, whether you go curbless, your material grade, and what’s found behind the wall at demo. Call (888) 427-1733 for a line-item estimate, free on-site.
Every shower we build is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential space. If a waterproofing issue, a tile problem, or a glass install fails within that window, we make it right. Call (888) 427-1733 and we’ll walk you through exactly what the promise covers.
Ready to Price Your Shower?
Book a free on-site estimate for Walk-In Showers & Shower Remodeling in Manhattan Beach. We measure the space, check what’s behind the wall, and hand you a written line-item price with the permit scope spelled out. A live person answers (888) 427-1733 around the clock, so you’re never routed to voicemail. Call (888) 427-1733 and we’ll schedule a time that fits your week.
Written by the team at Groundwork Construction Co.