Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Los Angeles, CA: What It Costs and How Long It Takes
A tub-to-shower conversion in Los Angeles typically runs $4,130 to $11,800 and takes 5 to 10 working days from demo to final inspection. The job means pulling the tub, capping or rerouting the drain, waterproofing the wet zone, and setting a new shower pan, walls, valve, and door. For a code-compliant, permitted conversion with real waterproofing behind the tile, call Groundwork Construction Co. at (888) 427-1733 for a free on-site estimate.
How a Tub-to-Shower Conversion Actually Unfolds
Most homeowners picture a two-day swap. The honest version has five stages, and the stages that take the longest are the ones you never see finished. Here’s the real sequence our technicians work through on a Los Angeles conversion.
Stage 1: Demo and rough inspection (days 1 – 2)
We protect the floor and adjacent rooms, shut off the water at the fixture stops, and remove the tub, surround, and any failing backer. On 1950s – 60s stucco tract homes this is where we find the surprises: drywall that crumbled behind old tile, a rotted subfloor corner, or a drain that’s been weeping for years. You approve any change in writing before we go further. Your decision here: whether to replace a soft subfloor section now or patch it.
Stage 2: Plumbing rough-in (day 2 – 3)
If the drain and valve stay where they are, this is quick work. If you’re moving the drain to the center of the new pan, or swapping the valve body, that’s when the wall opens up and the licensed plumber reconfigures. Your decision: valve brand and finish (a Kohler or Delta thermostatic valve is the popular upgrade), plus whether you want a niche or a bench framed in.
Stage 3: Waterproofing and backer (day 3 – 5)
This is the stage that separates a shower that lasts 20 years from one that grows mold behind the tile in three. We set cement backer or a bonded waterproof membrane, tape and mud the seams, and flood-test the pan. Nothing gets tiled over until the pan holds water. No shortcuts here.
Stage 4: Tile, setting, and grout (days 5 – 8)
Wall tile, floor tile, grout, and sealant. This is the slow part that shows, so we don’t rush it. Grout gets a full cure before the glass or curtain goes up.
Stage 5: Fixtures, door, and final inspection (days 8 – 10)
Showerhead, trim, drain cover, and the glass door or curtain rod. Then the city inspector signs off and we walk the job with you. Your decision: a framed glass door, a frameless panel, or a simple curtain rod.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
The look of a finished tub-to-shower conversion comes down to a handful of decisions. Here’s the honest trade-off on each.
- Acrylic or fiberglass shower pan and walls: the fastest and most economical route, with a seamless look and no grout to scrub. Good for rental units or a quick resale prep. Lifespan is 15 – 20 years before surface dulling shows.
- Tiled shower with a waterproof membrane: the Los Angeles standard for a home you plan to stay in. Costs more up front, but you pick the tile and it lasts decades. Grout needs sealing every year or two.
- Framed glass door: the practical default. Cheaper than frameless, easier to align when the opening isn’t perfectly plumb.
- Frameless glass panel: cleaner sightline, stronger resale appeal, and pricier. Needs a level opening and solid framing, so it pairs best with a planned conversion rather than a retrofit into an old wall.
- Bench or niche: small additions that lift daily comfort. A niche costs little extra during the build and much more as a later add-on.
A single-head thermostatic valve from a name like Kohler is the most common upgrade. If you’re weighing a wider scope, our Bathroom Remodeling service covers the full room, and many homeowners pair the shower conversion with a vanity refresh as part of a full Bathroom Remodeling in Los Angeles.
What Tub-to-Shower Conversion Costs in Los Angeles, CA
Plan on $4,130 to $11,800 for a tub-to-shower conversion in Los Angeles. The low end is an acrylic unit dropped into the existing footprint; the high end is a tiled shower with a moved drain, a frameless glass panel, and premium trim.
| Line item | Typical Los Angeles range |
|---|---|
| Acrylic pan and wall kit conversion | $4,130 – $6,500 |
| Tiled shower with membrane and niche | $7,500 – $11,800 |
| Framed glass door | $600 – $1,400 |
| Frameless glass panel | $1,200 – $2,800 |
| Drain relocation | $500 – $1,500 |
| Valve replacement | $350 – $900 |
Five things push the number from low to high: the size of the existing alcove, whether the subfloor or framing is rotted, whether the drain and valve move, the tile grade you pick, and whether the job needs a permit plus inspection. A written line-item estimate spells out what’s included, which on ours means demo, disposal, waterproofing, tile, setting materials, fixtures you’ve chosen, and cleanup. It does not include moving a load-bearing wall, relocating the toilet, or structural repairs found under the tub, and we’ll quote those separately before proceeding. Upfront pricing means the number you see is the number you pay, with a written scope behind it.
See the difference
Before
After
Before
After
Before
AfterWhat Los Angeles Homes Specifically Do to This Job
Los Angeles is a seismic basin with fire code layered on top, and that reality reaches into the bathroom. In the Hollywood Hills and the Santa Monica Mountains, hillside grade and pier-and-beam foundations mean the plumbing below a second-floor shower may be harder to reach than a flat-lot conversion, and that affects both schedule and price. In the flats, the housing stock splits hard: 1920s – 40s Spanish Colonial bungalows in neighborhoods like Silver Lake and Echo Park often hide galvanized supply lines and cast-iron drains that a conversion should address while the wall is open; postwar 1950s – 60s stucco tract homes in the Valley are generally easier, but their original shower pans were never built to modern waterproofing standards and tend to be the source of the failure that prompted the call. The 1960s – 70s dingbats and soft-story apartment buildings now subject to the Soft-Story Retrofit Ordinance under Ordinance 183893 often need the shower reworked in tandem with the retrofit, so coordinating trades matters there. Most conversions inside an existing alcove are permitted work in Los Angeles and require a final inspection, which we pull and see through. It’s why getting the inspection sign-off and the workmanship in writing on the same job matters. If the scope is broader, homeowners often pair a conversion with other exterior work we do across Los Angeles, from Metal Roofing in Los Angeles on a hillside home to Tile Roofing in Los Angeles where the original roof is showing its age.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Los Angeles
A tub-to-shower conversion usually takes 5 to 10 working days, with most scheduled jobs finishing inside two weeks from demo to final inspection. The tiled route runs longer than an acrylic drop-in because of cure time. Call (888) 427-1733 to schedule your free estimate and get a firm start and finish date for your project.
Yes, converting a tub to a shower inside an existing alcove is permitted work in Los Angeles and requires a final inspection. If the plumbing moves or the wall is opened for a valve swap, that portion is inspected too. We pull the permits and see the job through inspection as part of the project. Call (888) 427-1733 for a free estimate that includes the permit scope.
Usually yes, and most conversions stay in the existing footprint when the drain and valve are sound. That keeps the price closer to $4,130 and shortens the schedule. When the drain is off-center or the valve is failing, we’ll show you the added cost in writing before we start. Call (888) 427-1733 for an on-site look at what your drain allows.
Expect $4,130 to $11,800, with the low end an acrylic unit and the high end a fully tiled shower with frameless glass and a relocated drain. The cost moves on alcove size, subfloor condition, fixture grade, and whether the drain moves. Call (888) 427-1733 for an exact quote, with a written line-item estimate and a $1,000 credit on projects over $10,000.
Every conversion we build is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship on the waterproofing, tile, and fixture install for two full years, well beyond the standard one-year workmanship window most contractors offer. Call (888) 427-1733 to go over the details before you book.
Get a Free Tub-to-Shower Conversion Estimate in Los Angeles
If you’re ready to price a tub-to-shower conversion in Los Angeles, call Groundwork Construction Co. at (888) 427-1733 to book a free on-site estimate. We’ll measure the alcove, check the drain and valve, walk you through the acrylic versus tiled options, and hand you a written line-item estimate with the permit scope included. No pressure and no surprises. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available. Live person answers the phone, 24/7.
Written by the team at Groundwork Construction Co..