Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Gutters & Accessories in Los Angeles: What the Job Costs and How Long It Runs
Gutters & accessories in Los Angeles typically run $2,400 – $6,800 for a full seamless aluminum system with hangers, downspouts and screens, and most single-story homes are finished in one to two days. That number climbs on two-story hillside homes, on copper, and wherever an old system has to come down before anything new goes up. Call (888) 427-1733 for a free on-site estimate on your own roofline.
What a Real Install Day Looks Like, Stage by Stage
Gutters look simple from the ground. They aren’t. What we do in Los Angeles follows the same five stages every time, and the decisions you’ll make at each one are the decisions that keep the system from sagging, overflowing or pulling off the fascia three winters from now.
Stage 1: On-site measure and pitch plan (45 – 90 minutes). We walk the roofline, shoot the fascia height with a level, and map where water actually needs to go. On a 1925 Spanish Colonial in Silver Lake this is where we find the original wood fascia has soft spots under the old hangers. You decide the run direction and downspout exit points before pricing is written.
Stage 2: Written line-item estimate (same week). Length in linear feet, gutter profile, material gauge, number of downspouts, hanger spacing, screens or leaf guards, and the line for any fascia repair. Upfront pricing, no surprises. This is the stage where homeowners compare apples to apples, and it’s the stage where vague competitors fall apart.
Stage 3: Tear-off and deck prep (half a day on most homes). Old gutters and hardware come down, exposed fascia gets inspected, and rot gets cut out and sistered before a single hanger goes up. On postwar stucco tract homes in the Valley, we often find hangers that were nailed straight into the roof sheathing instead of the fascia. Those get corrected.
Stage 4: Forming and hanging the run (one day). Seamless aluminum is roll-formed on site to the exact length, so there are no butt joints except at corners and outlets. Hangers go in every 24 inches, with an extra pair within 18 inches of each outlet. Downspouts are strapped to the wall and daylighted or tied into the drainage you’ve chosen.
Stage 5: Water test and walkthrough (30 – 60 minutes). We run a hose through the whole system and confirm pitch, flow and outlet behavior. You get the walkthrough and the 730-Day Done Right Promise in writing. If it drips where it shouldn’t, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Aluminum, Copper or Steel? The Choices You’ll Actually Make
- Seamless aluminum (K-style 5″ or 6″): The workhorse. Light, rustproof, and the right call for most LA homes. 5″ handles typical roof loads; 6″ is worth the upgrade when the roof plane is large or the run is short.
- Galvanized steel: Tougher and stiffer than aluminum, holds paint well, but heavier on the hangers. Suits homes where tree debris is aggressive and you want something that won’t dent.
- Copper: The premium choice on Spanish Colonial and Craftsman homes where the patina belongs with the architecture. Expect two to three times the aluminum price, plus soldered joints instead of sealed ones.
- Half-round vs. K-style profile: Half-round reads period-correct on historic homes; K-style moves more water per linear foot. Pick the profile that fits the house, then size up if you’re borderline.
- Leaf protection: Screens or micro-mesh guards make sense wherever mature trees overhang the roof. Plastic screens fail fast in UV; stainless micro-mesh holds up. Cheap foam inserts are a pass.
What Gutters & Accessories Costs in Los Angeles, CA
Most Los Angeles gutter jobs land $2,400 – $6,800. Here’s what moves the number:
- Linear footage and height: Single-story bungalow vs. two-story hillside home. Height adds labor, ladder time and staging.
- Material: Aluminum sits at the low end; galvanized steel adds roughly 20 – 35%; copper roughly doubles to triples the material line.
- Fascia condition: Replace one or two boards and you’re at the low end. Should the original 1930s fascia get cut out and sistered along a full run, add $900 – $2,400.
- Downspouts and drainage: Standard downspouts to grade are included. Tying into buried drainage, installing pop-up emitters or adding a dry well adds $300 – $1,200 depending on run length.
- Accessories: Leaf guards, splash blocks, and cleanout outlets are line items, not surprises.
Every estimate is written line item by line item. The number you see is the number you pay. What’s not included unless we write it in: fascia replacement, roof edge metal, and any drainage trenching. If a roofer needs to address the drip edge first, that’s part of a full Roofing in Los Angeles scope and we’ll say so on the estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Los Angeles Homes Tear Up Gutters the Way They Do
Los Angeles gutters fail from the inside out. The Mediterranean climate means months of bone-dry heat followed by a hard winter rain window, and that cycle dries out seals, shrinks hanger holes and cracks the caulk long before anything visible goes wrong. Then in January the water arrives in a hurry, the system that passed a glance in August overflows behind the fascia, and the damage shows up as staining on the stucco or rot in the sheathing.
Housing era matters enormously. On the 1920s-40s Spanish Colonial and Craftsman bungalows in neighborhoods like Los Feliz, Highland Park and Silver Lake, we’re usually working around original wood fascia, narrow overhangs and box gutters that were never designed for a seamless aluminum profile. On the postwar 1950s-60s stucco tract homes out in the Valley, the failure pattern is the opposite: adequately sized gutters hung on long spans with too few hangers, sagging under the first heavy rain. And in the hills, the Santa Ana wind and the fire-resistance requirements that come with them push toward non-combustible gutter and edge materials along the roofline.
Where the roof itself is the larger problem, gutters are the wrong first dollar to spend. Our Roofing service handles the roof assembly; gutters handle what leaves it. We tell homeowners that plainly when it’s the case. For details on the wider scope, see our Los Angeles service page.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Gutters & Accessories in Los Angeles
One to two days for most single-story homes, and that includes tear-off, fascia prep, hanging and the water test. Two-story homes and any job with fascia replacement stretch to two to three days. We schedule around weather and never leave a run half-open overnight if rain is in the forecast.
Generally no for a standard replacement. Gutters don’t change the structure and don’t fall under seismic or fire-zone permitting. But a few situations do pull in permitting, like drainage that involves grading or lateral ties, or accessory work that touches a hillside foundation. When we walk the property, we tell you exactly what your job triggers, and we don’t guess.
Most complete seamless aluminum systems land $2,400 – $6,800 including hangers, downspouts and standard accessories. Copper pushes higher, and fascia repair or buried drainage adds on top. Call (888) 427-1733 for a written, itemized estimate – the consultation is free and you’ll see every line.
Sometimes. If the run is sound and pitched correctly, adding micro-mesh guards and replacing worn downspouts is a smart partial. If the hangers are pulling or the pitch is wrong, screens over a bad run just hide the problem. We’ll show you which side of that line you’re on before writing an estimate.
Every install is covered by the 730-Day Done Right Promise – if the pitch is off, a hanger pulls free or a joint leaks from install, we come back and make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Manufacturers’ warranties on copper and steel cover material defects separately.
Get a Written Estimate on Your Gutters Today
If your gutters are sagging, overflowing or sitting on fascia that’s seen better days, the free on-site estimate is the fastest way to a real number. Call (888) 427-1733 and a live person answers, any time. We’ll walk the roofline, check the fascia, and hand you a written line-item quote – no vague “pricing varies” language and no surprises. Many Los Angeles homeowners pair the work with Sliding & Patio Doors in Los Angeles to address the exterior all at once, and some go further with Impact Garage Doors in Los Angeles while the crew is out.
Written by the team at Groundwork Construction Co.