A Groundwork company - serving Los Angeles, CA
Custom & Geometric Windows in Marina del Rey, CA | Groundwork Construction Co. of Los Angeles

Custom & Geometric Windows in Marina del Rey - Written Price Before Anything Is Ordered

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Custom & Geometric Windows in Marina del Rey: What the Job Actually Involves

Custom and geometric windows in Marina del Rey typically run $8,000 – $25,000 installed, depending on the count, the shapes, and how much framing the existing wall allows. Most jobs we quote land in three to five weeks from template to final inspection: roughly two weeks for fabrication on the angled or arched units, and two to four days on site for teardown and set. The work is narrow and specific, which is why it’s worth a real conversation before a deposit. Call (888) 427-1733 and we’ll walk the site.

Call (888) 427-1733

This isn’t the shopping-center window-replacement world. A geometric window is a build decision as much as a product decision. The angles have to be templated to your wall, the header has to carry the load the old opening carried, and on the marina’s 1960s – 1980s condo stock, the framing you find once the stucco is off rarely matches what the drawings promised.

How We Run a Custom & Geometric Windows Project

Every job follows the same five stages. The durations below are what we actually schedule, not a best case.

  • Stage 1 – Site walk and measurements (day 1, 60 – 90 minutes). We measure the existing opening, check the header, and photograph the wall assembly on the interior and exterior. You decide which openings you’re targeting and whether the geometry is a true arch, a half-round, a triangle, a trapezoid, or a stacked transom above a rectangle. Bring your HOA’s exterior-change form if you have one; we’ll read it on site.
  • Stage 2 – Template and drawing sign-off (days 2 – 10). For angled and arched units, a field template or a laser-measured drawing goes to the fabricator. This is where you lock the glass package, frame finish, and hardware. Expect a signed submittal before anything is ordered. Condo jobs on Admiralty Way usually need an architectural review signature here, and that step alone can add a week if the board meets monthly.
  • Stage 3 – Fabrication (about 10 – 14 days for geometric units). Rectangular units come faster; a true radius or a mitered-corner frame does not. We confirm the delivery date in writing before Stage 4 begins.
  • Stage 4 – Removal and set (2 – 4 days on site). Flashing, sill pan, and frame go in first, then the unit, then the interior trim and exterior sealant. Any rot in the rough opening gets replaced during this window, and we tell you the cost the same day we find it rather than folding it into a change order later.
  • Stage 5 – Inspection and closeout (same week). Where the work touches the building envelope or changes an opening, we pull the permit and schedule the inspection. Final walk, written closeout, and the 730-Day Done Right Promise is attached to the paperwork in plain language.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between on a Geometric Window Project

The frame and glass package is where most of the decisions live, and the trade-offs are real.

  • Wood-clad frames (Andersen, Marvin): the classic choice for arched and angled units because the corner joinery holds true and the frame can be milled to a genuine radius. Warmer inside, paintable to your trim, but the exterior cladding has to be corrosion-grade for salt air or the fasteners and cladding edges will show rust within a few seasons.
  • Aluminum with a thermal break: thinner sightlines, which reads cleaner in the marina’s contemporary towers and infill townhomes. Needs a marine-grade finish (anodized or a coastal-rated powder coat), not the standard inland coating, or the salt fog off the water takes it down inside a decade.
  • Fiberglass and composite: stable dimensionally, so a trapezoid or a long narrow transom won’t rack out of square. Suits the 1970s stucco condos where the wall moves with the marine layer. Limited finish options, which matters if your HOA has a color rule.
  • Glass package: laminated glass for wind-driven rain and some security value; low-E for condensation control on the cool, damp side of a cold-framed wall; and for angled units, the glazing has to be specified for the shape, not cut from a standard sheet.
  • Hardware and operation: fixed units are the simplest and cheapest for true geometry; operable awning or casement hardware in a non-standard shape costs more and needs a good weather seal, so we tell you honestly where a fixed panel will serve you better.

What Custom & Geometric Windows Cost in Marina del Rey, CA

Plan on $8,000 – $25,000 for the job, with rectangular custom runs sitting at the low end and a mix of true radius, angled, and stacked geometric units toward the top. What moves the number:

  • Count and shape complexity: one arched feature window might sit at $3,000 – $6,000; a whole façade of trapezoids and a half-round transom will run well past $20,000.
  • Existing condition: if the rough opening is sound, the job stays in range. Rot, a sagging header, or a 1970s stucco wall that’s cracked along the corner adds framing and stucco-repair work at the high end.
  • Structural change: enlarging an opening, adding a header, or going floor-to-ceiling means structural work and inspection – that’s the biggest single push toward the top of the range.
  • Material grade: standard-clad wood at the low end; marine-grade aluminum or a premium clad package at the high end.
  • Permit scope: a like-for-like replacement may not need one, but any change in opening size or an envelope-touching install does – we include the permit and inspection in the written quote.

A written estimate here lists units, glazing, hardware, flashing and sealant, framing repair allowance, permit and inspection, and disposal. What it doesn’t cover unless we state it: interior paint beyond the trim line, HOA fees, and any structural repair found after demo.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Marina del Rey Homes Do to This Job Specifically

Nearly every project here is a waterfront-adjacent remodel, and the coastal environment drives the spec more than the design taste does. Salt air attacks fasteners and metal faster than any inland owner expects; the marine-layer damp causes condensation on cold-framed walls and attic-side surfaces; and the wide low eaves and flat roofs common to the marina’s 1960s – 70s apartment architecture trap moisture where an inland house would dry out. In the marina, exterior fasteners last half as long – a gasket or window screw on a 1970s Admiralty Way condo is often already rust-stained, and we spec stainless and marine-grade hardware from the start rather than correcting it two years in.

Buildable land is scarce here, so the work is dense multifamily and condo renovation, plus the occasional surviving 1950s-era bungalow off Washington Boulevard. That mix means a geometric window project usually lives inside a condo association’s exterior-change rules, with a board review and often a coastal-zone consideration, rather than a standard single-family permit path. It’s a different sequence than a Santa Monica or Culver City job, and we plan the schedule around it. For the rest of the envelope scope, see our Windows & Doors in Marina del Rey page.

Serving Marina del Rey, CA – Our Local Coverage Area

We serve Marina del Rey and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Custom & Geometric Windows in Marina del Rey

Book a Free Estimate for Custom & Geometric Windows in Marina del Rey

A free on-site estimate for custom & geometric windows in Marina del Rey starts with a call to (888) 427-1733. A live person answers, 24/7, and we book a site walk that fits your schedule and the condo association’s access rules. On site, we measure the openings, check the framing, and read your HOA’s exterior-change form with you. You’ll get a written line-item quote with the permit and inspection included, and the price you see is the price you pay. Many of these jobs are part of a larger envelope project, so ask about our Windows & Doors service while you’re on the call.

Homeowners across Marina del Rey pair this scope with exterior work – a new sill and threshold often connects to Concrete Driveways & Concrete Work in Marina del Rey where a stoop or walkway is in the plan, or to Asphalt Driveways & Resurfacing in Marina del Rey where an approach apron needs to be rebuilt while the crew and equipment are already on site. Either way, you’re dealing with one schedule and one written guarantee, and the 730-Day Done Right Promise covers the work from the first measurement to the final walk.

Written by the team at Groundwork Construction Co.

Why Marina del Rey Chooses Groundwork Construction Co. of Los Angeles

We set the standard for custom & geometric windows in Marina del Rey.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Marina del Rey

Getting your custom & geometric windows project started is simple.

1

Call or Request a Free Estimate

Tell us about your custom & geometric windows project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local custom & geometric windows pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Marina del Rey Customers Say

Trusted by homeowners across Marina del Rey and surrounding areas.

★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson
★★★★★

"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."

Dev Sharma
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Custom & Geometric Windows in Marina del Rey?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Marina del Rey.

(888) 427-1733

Request a Free Estimate in Marina del Rey

Tell us about your custom & geometric windows needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch