Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Santa Monica, CA: What the Job Actually Involves
Custom & geometric windows in Santa Monica usually run $8,000 – $30,000 for a typical residential project, with most single-arch or angled installations landing between $12,000 and $18,000 once fabrication, framing changes and coastal permitting are included. A straightforward arch or half-round replacement takes three to five weeks from template to final inspection; a true custom shape cut into existing stucco or an ocean-facing wall runs closer to eight or ten. Call (888) 427-1733 and we’ll walk your opening, take measurements and give you a written, line-item number before you commit to anything.
The Process: How We Build Custom & Geometric Windows – Start to Finish
Shaped and angled openings aren’t a swap-out job. They’re a fabrication-and-refit job, and the sequence matters more than the window itself. Here’s how it runs.
Stage 1 – Site survey and field template (day 1, about 90 minutes)
We measure the rough opening, check whether the wall is plumb and square, and note what’s behind the stucco: shear paneling, retrofit anchors or original 1920s framing that’s drifted. For arches and angles we build a physical template. You decide right here whether the new window keeps the exact profile of the old one or goes slightly larger for more glass.
Stage 2 – Shop drawing and sign-off (days 2 – 7)
The fabricator returns a drawing with dimensions, radius, muntin layout and frame color. You approve it in writing before anything is cut. This is the stage where a wrong radius gets caught for the price of a pencil stroke instead of a reordered unit. Glass type gets locked here too.
Stage 3 – Order and fabrication (3 – 6 weeks)
Custom shapes aren’t stocked. Lead time depends on the shape and finish. During this window we pull the permit if the opening size or wall structure is changing, and we schedule the crew so demo doesn’t happen before the unit is on the ground.
Stage 4 – Removal, reframing and install (1 – 3 days on site)
Day one is demolition, cutting back stucco to clean framing, and repairing any rot or soft framing we find. Day two is setting the unit, shimming, flashing and sealing. If a header or shear panel has to change for a large geometric opening, that adds a day and a framing inspection before the window goes in.
Stage 5 – Finish and inspection (days 4 – 5)
Stucco patching, interior trim and paint touch-up. Then the inspection, if one was required. We walk the job with you before we close it out and leave the paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Your Options: Frame, Glass and Shape Choices With Honest Trade-offs
- Wood-clad frames suit the Spanish and Craftsman stock near Ocean Park. Warm interior, weather-resistant aluminum cladding outside. Higher cost and more upkeep than vinyl, but they match original architecture where a vinyl unit reads wrong.
- Fiberglass and vinyl hold up best against salt air off Santa Monica Bay. Fiberglass can be shaped into arches with less chance of warping; vinyl is the least expensive path but limits radius options and profile depth.
- Aluminum gives you the thinnest sightlines for large geometric panes and the sharpest angles. It conducts heat, so in west-facing coastal glass it needs a thermal break to avoid condensation.
- Glass spec is its own decision. Tempered glass is required in many large or low geometric units. Low-E and laminated glass help with glare and sound, but laminated reduces the clarity that makes a shaped window worth the money.
- Shape and configuration drive most of the cost: a half-round or eyebrow arch is the easiest geometry; a true circle, trapezoid or multi-pane angled bay is the hardest. Muntin grid and interior stain-grade trim are the last decisions, and both add cost.
Where an addition or a fully custom home includes shaped glass, prefab partners like Cover and Mighty Buildings engineer the openings into the module from the start, which can shave weeks off the field work. For typical remodels, our Windows & Doors service handles the broad selection if you want to compare against standard units.
What Custom & Geometric Windows Cost in Santa Monica, CA
Plan on $8,000 – $30,000 for custom & geometric windows in Santa Monica, with a single arched or angled unit in an existing wall usually landing between $12,000 and $18,000. A full set of matching shaped windows across a facade pushes toward the top of the range.
Five variables move that number:
- Shape and size – a curved arch costs less to fabricate than a true circle or a multi-pane trapezoid; larger glass means heavier frames and often tempered spec.
- Existing condition – rot or soft framing behind old stucco adds repair hours, and old coastal walls often hide both.
- Structural work – widening or reshaping an opening that touches a header or a shear panel adds framing, engineering and a second inspection.
- Frame and glass grade – wood-clad and custom finishes sit at the high end; fiberglass and vinyl at the low end.
- Permit scope – a like-for-like shape swap is one kind of permit; a new opening in a coastal-overlay wall is another, with more plan-check time and sometimes Coastal Commission review.
A written estimate covers fabrication, template, install labor, flashing and sealant, standard stucco patch, and permit fees we can confirm up front. It typically doesn’t cover finish repainting, custom interior trim beyond the standard, or structural engineering if a header has to change – we price those as separate line items so nothing appears mid-job. Our upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhy Santa Monica Homes Make This Job Different
The housing stock here is the reason no two shaped-window jobs look alike. South of Wilshire and through Ocean Park, we regularly work on 1920s – 40s Spanish bungalows where the original arch windows have settled out of square, and a same-size replacement won’t seal without reframing first. Up in the 90402 flats, large luxury remodels want true geometric feature windows that need real engineering. All of it sits under two extra layers of process: Santa Monica’s slow plan-check, and for anything in the coastal overlay, Coastal Commission jurisdiction that can stall a permit for weeks. Marine air accelerates corrosion on flashing and fasteners, and the June Gloom-to-dry-summer swing cracks stucco around shaped openings faster than inland. We work all of Santa Monica with that in mind, and the work is covered by our 730-Day Done Right Promise.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in Santa Monica
Most jobs run four to six weeks from signed drawing to final inspection, with three to six of that being fabrication and one to three days of actual on-site install. Permit timing can add to it. Call (888) 427-1733 for a timeline against your specific opening.
You need a permit any time the opening size or wall structure changes, or the unit is in the coastal overlay. A like-for-like profile swap in some cases qualifies as minor. We confirm the requirement with the city before demo and pull what’s needed.
Often yes. If the new shape fits inside the existing rough opening, no header or shear panel has to change. When the shape is larger and touches load-bearing framing, we add engineering and a framing inspection. We’ll tell you which case you’re in at the survey.
A single shaped unit in an existing wall typically runs $12,000 – $18,000 installed, depending on material, glass spec and whether reframing is needed. A full facade of matching units climbs toward $30,000. Call (888) 427-1733 for an exact written quote – estimates are free.
Our workmanship is backed by the 730-Day Done Right Promise – if it isn’t done right, we make it right. Manufacturer glass and frame warranties stack on top. Every project carries it, with no shorter or conditional version.
If this is part of a larger project, the wider scope lives on our Windows & Doors in Santa Monica page, and homeowners often pair a facade refit with our Concrete Driveways & Concrete Work in Santa Monica or Asphalt Driveways & Resurfacing in Santa Monica.
Schedule Your Free Estimate
Custom & geometric windows are a measured, fabricated job, and the only way to give you a real number is to see the opening. Call (888) 427-1733 for a free on-site estimate in Santa Monica. A live person answers around the clock, we take measurements and check the framing on the visit, and you get a written line-item estimate with no surprises. Background-checked, uniformed technicians handled the last one the same way.
Written by the team at Groundwork Construction Co. of Los Angeles.