Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Manhattan Beach, CA: What It Costs and How It Goes
Metal roofing in Manhattan Beach typically runs $15,000 to $40,000 for a full residential installation, and most homes take one to two weeks from tear-off to final inspection. The number climbs on the sand-side streets west of Highland, where salt air dictates marine-grade fasteners and heavier gauge panels. If you’re weighing a metal roof against another tear-off, call (888) 427-1733 for a free on-site estimate with a written line-item quote.
How a Metal Roofing Project Actually Runs, Stage by Stage
This isn’t a product you drop on an existing roof and forget. Metal roofing calls for a measured sequence, and the decisions you make at each stage shape the cost and the finished look.
Stage 1: Inspection and accurate measurement (one visit)
We start on the roof and in the attic. We measure every plane, check the decking thickness, look at rafter spacing, and map the existing penetrations: vents, skylights, chimney, any solar conduit. On older homes here that means pulling a few boards to confirm the sheathing isn’t soft. You get a written scope with panel count, gauge, and trim pieces spelled out. No allowances, no “TBD” lines.
Stage 2: Tear-off and decking repair (1 – 2 days)
The old roofing comes off down to the deck, and we dispose of it in a dumpster staged on the driveway. Raised-foundation bungalows in this city often need decking replaced where the wood has dried and cupped, and we’re looking at that honestly. You approve any decking replacement before we go further. This is the stage where surprises show up, so we photograph everything and show you.
Stage 3: Underlayment and flashing (1 day)
Synthetic underlayment goes down across the deck. Then the detail work: valley flashing, eave trim, step flashing at sidewalls, and the drip edge. Metal roofing fails at penetrations long before it fails at panels, so slow, careful flashing work at chimneys and vents is what we’re paying for here. This is the stage a homeowner can’t see on the invoice but absolutely feels in year five.
Stage 4: Panel installation (2 – 4 days)
Panels are set, aligned, and fastened. Fastener placement matters more than people realize, and stainless or marine-grade fasteners are non-negotiable on a Manhattan Beach roof. You choose standing seam versus exposed-fastener panels, panel width, and whether you want a heavier 24-gauge look or a lighter 26-gauge. We walk the layout with you before install so the seams land where you want them.
Stage 5: Trim, ridge, and final inspection (1 – 2 days)
Ridge caps, gable trim, and the gutters go on. We do a final walk of the roof and the ground, then meet the city inspector. The work is covered under our 730-Day Done Right Promise, and we leave you with the written scope and the manufacturer’s warranty on the panels.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Metal roofing is a family of products, not one thing. What you pick changes the price, the look, and the maintenance down the line. Here’s what actually comes up on Manhattan Beach jobs:
- Standing seam panels (24-gauge steel or aluminum): The cleanest, longest-lasting look, with concealed fasteners and no exposed screws. Best for contemporary custom builds. Higher cost, but it’s the option that best matches the architect-grade finish this town expects.
- Exposed-fastener panels (26-gauge steel): A lower-cost option that’s fine on a shed or garage but less forgiving on beachfront salt exposure, because the fastener heads are the first thing to corrode.
- Aluminum panels: Naturally corrosion-resistant and marine-friendly, which is why we lean here on the sand-side streets. Softer metal, so we specify thickness carefully.
- Standing seam with Kynar 500 finish: The painted finish that holds its color past a decade in coastal sun. Worth the upgrade if you care about the roof reading as one clean plane for the next 20 years.
- Solar-ready underlayment and conduit chases: If you’re planning panels later, we can pre-run conduit so you’re not drilling into a finished metal roof in five years.
We don’t skip spec because the panel is hidden. The materials you put under and around the panels decide how the roof performs, and that’s where we put the care.
What Metal Roofing Costs in Manhattan Beach, CA
Expect $15,000 to $40,000 for a full residential metal roof here, with the majority of homes landing in the $20,000 – $30,000 band. The low end fits a simple hip-and-gable on a modest footprint; the high end is a large custom contemporary with complex planes, multiple valleys, and marine-grade everything.
Four things push a job toward the high end:
- Roof size and complexity: More square footage and more planes mean more panels, more trim, more labor. A clean rectangle is cheaper per square than a roof with five valleys.
- Existing decking condition: A raised-foundation bungalow with cupped or rotted sheathing adds replacement cost. Older homes sometimes need structural work before the metal goes on.
- Material grade: 24-gauge with Kynar finish costs more up front than 26-gauge exposed-fastener panels and lasts dramatically longer in salt air.
- Penetrations and flashing details: Skylights, chimneys, and solar conduit each add detail work. This is where the good jobs separate themselves from the cheap ones.
Your written estimate lists the panel gauge, panel count, trim, underlayment, decking repair allowance, permit, dumpster, and labor line by line. What we don’t quote are things nobody can price until the roof is opened, like hidden rot. We flag those the day we find them and you approve before we move. The number you see on the estimate is the number you pay unless you ask us to change the scope.
See the difference
Before
After
Before
After
Before
AfterWhat Manhattan Beach Homes Specifically Do to This Job
Manhattan Beach is a teardown-and-rebuild town. Custom single-family builds on small coastal lots dominate, driven by strict coastal zoning on height, floor-area ratio, and setbacks, and an affluent clientele that expects architect-grade detail. That means metal roofing here is usually a deliberate, designed choice on a new build or a gut remodel, not an incremental repair on a 1950s cottage. The surviving beach cottages often sit on raised foundations with stucco and wood-frame walls, and that frame needs checking before panels go on.
The bigger local variable is salt. On the sand-adjacent streets west of Highland and in the Gaslamp and Strand area, salt-laden air eats through galvanized fasteners and untreated steel hardware within a few years. That’s why we specify stainless and marine-grade fasteners, and why aluminum panels are the smarter call than standard steel in those zones. Marine-layer humidity and concentrated winter storms do the rest, and any metal roof that wasn’t flashed properly will telegraph its weak spots in the first rainy season.
We handle metal roofing as part of a full Roofing in Manhattan Beach scope or as a standalone tear-off. Homeowners often pair a metal roof with Window Replacement in Manhattan Beach during the same build, and we coordinate the two so the sequencing doesn’t drag.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Metal Roofing in Manhattan Beach
Most residential metal roofing installs here take one to two weeks from tear-off to final inspection. A simple hip-and-gable on a small footprint can close in seven working days; a complex custom roof with multiple valleys and pre-run solar conduit pushes past two weeks. Weather windows matter, so we schedule around the forecast. Call (888) 427-1733 for a timeline based on your roof.
Yes, a roofing permit is required, and coastal zoning adds review layers on homes in the sand-side zones west of Highland. We pull the permit and meet the inspector as part of the job. That’s not paperwork for its own sake: the inspection is the last checkpoint on proper decking, underlayment, and flashing. We don’t hand you a homeowner-pulled permit and walk away. Call us for a scope that includes the permit.
Sometimes, but on older Manhattan Beach cottages it’s often not worth it. If the decking is solid and correctly spaced, we can install over it. On 1950s-era raised-foundation homes, the sheathing is frequently cupped, soft, or under-sized. We inspect it and quote replacement as a line item, never as a surprise mid-job. A roof that outlives its underlayment isn’t a good deal.
Full residential metal roofing here runs $15,000 to $40,000, with most homes settling between $20,000 and $30,000. Size, decking condition, panel grade, and flashing complexity are the four variables that move that number. We write every estimate line by line so you can see exactly where the money goes. Call (888) 427-1733 and we’ll quote your actual roof, not a range.
The panels carry their manufacturer’s warranty, and the installation is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. On the coast, we also specify marine-grade fasteners so the warranty isn’t undone by corrosion. Call for the written warranty terms before you sign anything.
Get a Free Metal Roofing Estimate in Manhattan Beach
If you’re planning a metal roof on a new build or a gut remodel, start with a free on-site estimate. Call (888) 427-1733: a live person answers, day or night. We’ll measure the roof, check the decking, walk through panel options, and hand you a written line-item quote with no allowances and no upsell. Financing at 0% for 18 months is available, plus $1,000 off projects over $10,000. This is part of broader Roofing work we handle across Manhattan Beach, and we also install Impact Windows & Doors in Manhattan Beach when the build calls for it. Brand options like Dvele and Cover come up when integrated systems are on the table.
Written by the team at Groundwork Construction Co.