Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Manhattan Beach, CA: What It Costs and How Long It Takes
Asphalt driveways & resurfacing in Manhattan Beach typically run $3,500 – $9,000 for new asphalt paving and $250 – $700 for a sealing and resurfacing coat, with most driveways finished in one to three days once the base is ready. A full driveway replacement, which is often what a salt-worn coastal drive actually needs, lands at $5,000 – $14,000. The range swings on square footage, how much of the old surface comes out, and whether the sub-base has settled. Call (888) 427-1733 for a free on-site measure and a written line-item quote.
How a Resurface or New Asphalt Drive Comes Together, Stage by Stage
Asphalt work looks simple from the sidewalk. Up close it’s a sequence, and skipping a stage is why so many coastal drives crack again within two winters. Here’s the order we work in on Manhattan Beach properties.
- Stage 1: Site visit and core check (about an hour). We measure the driveway, look at the slope and drainage away from the garage, and check the thickness and condition of the existing asphalt or concrete. On older beach cottages we’re often checking a base that was never built for today’s vehicle weights. You decide at this stage whether we’re resurfacing over a sound surface or doing a full replacement.
- Stage 2: Demo and haul-off (one day, occasionally two). If we’re replacing, the old surface comes out and goes to a recycler, and we expose the sub-base. You’ll want to move cars off the drive and clear access for the crew and the haul truck. On tight Manhattan Beach lots, we plan the staging around your neighbors’ access too.
- Stage 3: Base prep and grading (one to two days). This is the part nobody sees and the part that decides how the drive holds up. We grade for drainage, compact the base in lifts, and address any soft spots.
- Stage 4: Paving and compaction (one day). Hot asphalt goes down, gets screeded to grade, and is rolled while it’s still workable. You’ll stay off it for a set period after we finish, and we’ll tell you exactly when you can park.
- Stage 5: Sealing and cure window (a separate visit). A fresh asphalt drive cures before a seal coat goes on, so we schedule sealing as its own appointment. That’s when the $250 – $700 figure applies, and it’s the step that protects a coastal drive against sun, salt air, and winter rain.
Where the driveway is part of a bigger lot scrape or custom build, we sequence the paving last so heavy equipment doesn’t drive over new asphalt. That work often shows up as part of a full Driveway & Pavers in Manhattan Beach scope, and homeowners rebuilding a garage into living space often pair it with a Junior ADU & Interior Conversion in Manhattan Beach so the drive gets widened or re-sloped for parking that matches the new layout. Our technicians have up to 12 years of experience on asphalt and hardscape work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change Your Result
Resurfacing is not one product. What you pick here is what you’ll live with for the next decade.
- Seal coat over sound asphalt: the $250 – $700 option. It protects against UV and moisture and refreshes the black finish, but it only works if the surface underneath is intact. It buys years, not decades.
- Overlay (a new asphalt layer over the old): sits between sealing and full replacement in cost and lifespan. It suits a drive with minor cracking and a stable base, and it fails fast if the base is moving.
- Full-depth replacement: the $5,000 – $14,000 end. New base, new surface. This is the honest recommendation on drives with alligator cracking, sunken sections, or a base that was never properly compacted.
- Thickness and mix: a thicker asphalt lift and a heavier-traffic mix cost more up front and hold up better under an SUV and a second car. On a steep drive, the mix matters for traction and resistance to shoving.
- Edge restraint and drainage: steel or concrete edging keeps the asphalt from spreading, and a proper slope or channel drain moves water away from the garage. Cheap on the estimate, expensive to skip.
- Marine-grade hardware: on the streets near the sand, gates, drains, and edging that touch salt air should be stainless or otherwise corrosion-rated. This is where coastal drives quietly fail.
What Asphalt Driveways & Resurfacing Costs in Manhattan Beach, CA
Plan on $3,500 – $9,000 for asphalt paving, $5,000 – $14,000 for a full driveway replacement, and $250 – $700 for sealing. Those are real Manhattan Beach numbers, not a national average. Here’s what moves a job from the low end to the high end:
- Square footage and access. A wide drive on a flat lot prices differently than a narrow, steep, or tight-access drive where the crew and equipment work slowly around a corner lot.
- Existing condition. Sealing a sound drive is a one-visit job. Alligator cracking, sunken panels, or a failed base turn it into replacement, and the demo and haul-off add real cost.
- Base and drainage work. Regrading, soft-spot repair, new edging, or a drain to move water off a low lot all add line items.
- Material spec. Thicker lifts, heavier-traffic mix, and marine-grade edging and hardware raise the number and the lifespan.
- Scope and permits. When the driveway ties into a larger lot change, structural work, or a new build, the permit and inspection scope grows with it.
A written estimate from us lists demo, haul-off, base prep, materials, and seal separately, so you can see exactly what you’re paying for. No-hassle upfront pricing means the number you see is the number you pay; no surprise change orders mid-job. $1,000 off projects over $10,000 applies on larger drive and hardscape scopes, and 0% financing for 18 months spreads a bigger job across a comfortable window.
See the difference
Before
After
Before
After
Before
AfterWhy Manhattan Beach Properties Push This Job in a Different Direction
Manhattan Beach is a teardown-and-rebuild town on small coastal lots, and that reshapes driveway work. New custom single-family homes and gut remodels dominate, so a lot scrape is common and the drive gets rebuilt as part of a larger site plan rather than patched in place. The surviving 1950s beach cottages, many on raised foundations, often have a drive and base that predate today’s vehicles. Marine-layer humidity, salt air, and onshore wind hit exterior finishes hardest: on the streets west of Highland and around the Gaslamp and Strand area, salt eats through galvanized fasteners and untreated steel within a few years, so we specify stainless and marine-grade hardware where inland crews wouldn’t think to. Winter storm rain concentrates in a few weeks and finds every weak slope, so drainage and flashing away from the garage aren’t optional here. Coastal zoning, height limits, floor-area ratios, and setback rules, plus city permitting and inspections, mean a driveway tied to a new build or lot change gets planned in advance, not on the fly. If the drive is one piece of a bigger rebuild, our Driveway & Pavers service covers the wider scope, and we handle asphalt resurfacing across Manhattan Beach from the sand-side blocks to the lots east of Sepulveda.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Asphalt Driveways & Resurfacing in Manhattan Beach
Most resurfacing and sealing jobs are done in one to three days, with the surface ready for normal use shortly after. A full replacement runs longer because of demo, base prep, and the cure window before sealing. Call (888) 427-1733 for a timeline on your specific driveway; estimates are free.
A like-for-like resurface or seal usually doesn’t require a permit, but a driveway that changes the lot, ties into a new build or structural work, or alters drainage and grade often does. We pull the permits and pass the inspections on those scopes and tell you upfront which side of the line your job falls on.
Sometimes, yes. An overlay or fresh asphalt works when the base is stable and cracking is minor; it fails fast over a moving base or widespread cracking. We core-check and inspect first, then tell you honestly whether resurfacing will hold or replacement is the better spend. Call (888) 427-1733 for a free inspection.
Sealing and resurfacing typically run $250 – $700, new asphalt paving $3,500 – $9,000, and full replacement $5,000 – $14,000. Square footage, existing condition, drainage, and material spec drive the final number. Call (888) 427-1733 for an exact written quote; estimates are free.
Every asphalt job we do is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it covers the install, not just the materials. Questions before you book? Call (888) 427-1733 and a live person answers.
Get a Free Estimate for Your Manhattan Beach Driveway
Call (888) 427-1733 to schedule a free on-site estimate for asphalt driveways & resurfacing in Manhattan Beach. We’ll measure the drive, check the base and drainage, and hand you a written line-item quote with no-hassle upfront pricing, so you know the number before any work starts. A live person answers around the clock. We also cover nearby Palos Verdes Estates, El Segundo, Marina del Rey, and Culver City.
Written by the team at Groundwork Construction Co.