Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Calabasas, CA: What to Expect
Cabinets & countertops in Calabasas typically run $14,000 – $45,000 for a full kitchen’s worth, or $4,000 – $13,000 for cabinet installation on its own and $2,000 – $6,500 for new countertops. Most kitchens take two to four weeks from demo to final caulk: a week for cabinets, a few days for template and fabrication, then a day or two to set stone. Call (888) 427-1733 for a free on-site estimate before you commit to anything.
How We Run a Cabinet and Countertop Job, Start to Finish
This is the sequence we follow on a Calabasas kitchen. The timing below is what we hold ourselves to, and it’s what you should hold any contractor to.
Day 1: Demo, protection, and layout confirm
We pull the old doors, drawers, and countertops and haul them out. Floors and adjacent rooms get protected with rosin paper and plastic. Before anything new goes in, you confirm the layout on the wall with tape lines or a chalked footprint: sink position, dishwasher clearance, the gap between the island and the run. This is the last cheap moment to move something.
Days 2 – 6: Cabinet install
We shim and level the base cabinets first, then hang the uppers and set the island in place. Level matters more than most homeowners realize: doors that drag or gaps that open at the seams almost always trace back to an unlevel box. We scribe fillers to the wall so no gap shows. Crown and light rail go on last. You’ll have usable drawers and doors by day six.
Days 6 – 9: Template and fabrication
For stone, a fabricator templates the installed cabinets in person. They cut sink and cooktop openings from that template, not from a sketch. Quartz and granite fabricated this way fit the first time. This is the stall point in most kitchens: nobody can install countertops until the cabinets are fully set, so plan around it rather than through it.
Day 10 or later: Countertop set and sink tie-in
Countertops arrive cut and polished, get set on a bead of adhesive, and the sink and faucet are connected. We check every joint and corner for a flush seam. If you chose a farmhouse apron sink, this is when the front reveal gets set.
Final day: Backsplash, hardware, punch list
If you’re adding a backsplash, it goes in after the counters are down. Knobs and pulls go on, drawers get adjusted, and we walk the room with you line by line against the estimate. Anything on the punch list gets fixed at that visit, not three weeks out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Nearly every decision below is yours, and the honest trade-offs matter more than the marketing.
- Stock, semi-custom, or full-custom cabinets. Stock boxes fit standard dimensions and come in fast; semi-custom lets you adjust widths and heights; full-custom means anything. On a hillside Calabasas kitchen with an odd wall, semi-custom usually solves the geometry without the custom price.
- Plywood vs. particleboard boxes. Plywood holds screws better and survives a water event; particleboard is cheaper and lighter but swells when wet. Under a sink, plywood is worth the upcharge.
- Door style and finish. Painted MDF doors look crisp and take color beautifully, but they chip at corners; solid wood and thermofoil each have their own wear pattern. KraftMaid offers both in a range of stains and paints if you want a known name behind the doors.
- Quartz vs. granite countertops. Quartz is non-porous, doesn’t need sealing, and gives you consistent color; granite is natural, heat-tolerant, and needs resealing about once a year. Marble is stunning and soft, so it stains. Porcelain slabs are thin and heat-resistant but chip at edges.
- Edge profile and thickness. A standard eased edge on 3cm material is the value pick; a mitered or built-up 6cm edge adds cost and reads heavier in an open kitchen.
- Sink and cooktop cutouts. An undermount sink with a single-bowl configuration is the common choice. Changing to a farmhouse apron front or a drop-in changes the cabinet front and the cutout.
What Cabinets & Countertops Costs in Calabasas, CA
Plan on $14,000 – $45,000 for a complete kitchen’s cabinets and counters. Broken out, cabinet installation lands at $4,000 – $13,000, countertop installation at $2,000 – $6,500, and a backsplash at $800 – $2,500.
Four things push a job toward the top of that band. Size and layout: a kitchen with a long run plus an island costs more in cabinet boxes, doors, and slab area than a compact galley. Existing condition: if the old cabinets were furred off an out-of-square wall, or the floor sags, the install takes longer. Material grade: quartz at the entry level and a full custom painted finish sit at opposite ends. Relocation: moving the sink, dishwasher, or range hood means plumbing and electrical rough-in, which adds to the job.
A written estimate from us is line-item: cabinet brand and box construction, door and finish, countertop material and edge, sink and faucet allowance, labor, haul-away, and permit cost if any. Not included unless stated: appliance cost, wall repair beyond the cabinet footprint, and any flooring you decide to replace while the room is open. Our pricing is upfront, so the number you see is the number you pay. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Calabasas Homes Specifically Do to This Job
Calabasas sits in the Santa Monica Mountains foothills, so hillside and canyon lots dominate. A flatland cabinet installer who levels off a floor that pitches two inches across a room will fight the same problem all week. We check the floor first, then shim to a true line. Many of the homes here are large Mediterranean and Spanish-style custom estates in The Oaks, Calabasas Hills, and Mulholland Heights, with 1960s-70s ranch homes and newer rebuilds scattered through the canyons. That mix means we see two failure modes most often: water-damaged cabinet bases under old sinks, and cabinet doors that no longer line up because the wall behind them has moved.
Two local rules touch this job. Native coast live oaks are protected under Calabasas oak-tree ordinances, so a kitchen addition or a bump-out that reaches into a protected root zone can trigger an arborist report and setbacks before a single cabinet is ordered. And because the city sits in a Very High Fire Hazard Severity Zone, rebuilds and additions must meet Chapter 7A ignition-resistant standards, which can shape exterior wall and vent choices even when the work is interior. We also cover the rest of Calabasas for other trades, and homeowners often pair a kitchen update with Walk-In Showers & Shower Remodeling in Calabasas or a Tub-to-Shower Conversion in Calabasas while crews are already on site.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Calabasas
Most kitchens take two to four weeks from demo to punch list. Cabinet install runs about a week, stone fabrication and template another three to four days, and countertop set and trim finish it out. Call (888) 427-1733 for a schedule tied to your exact layout.
Straight swap for straight swap, no: replacing cabinets and counters in the same footprint usually doesn’t require a permit. Moving plumbing, electrical, or a load-bearing wall does, and so does a kitchen addition. We’ll tell you which category your job is in before you sign, and we pull permits when they’re required.
Yes, and most of our Calabasas jobs stay in that lane. Keeping the sink, dishwasher, and range where they are avoids rough-in work and keeps the job inside two to four weeks. If you want a different layout, that’s a bigger project and belongs in the broader Kitchen Remodeling in Calabasas conversation.
Expect $14,000 – $45,000 for a full kitchen, with cabinet installation at $4,000 – $13,000 and countertops at $2,000 – $6,500. The upper end reflects larger layouts, custom finishes, and any plumbing or electrical relocation. Call (888) 427-1733 for an exact quote – estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Cabinet and countertop manufacturers carry their own product warranties on top of that, and we walk you through both before install.
Get a Free Cabinets & Countertops Estimate in Calabasas
We’ll come to your kitchen, measure the layout, check the floor and walls, and put a line-item estimate in your hands. No cost, no obligation, and a live person answers when you call. Reach us at (888) 427-1733 for cabinets & countertops in Calabasas, and we’ll fold it into a broader Kitchen Remodeling plan if you want one. Background-checked, uniformed technicians on every visit.
Written by the team at Groundwork Construction Co. of Los Angeles.