Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Calabasas, CA: Answer First
Door installation in Calabasas, CA usually runs $650 to $2,900 per exterior door and $450 to $1,400 per interior door, installed. A standard exterior swap takes 4 to 7 hours in a single visit; a rough opening where none existed, or a fire-rated entry in a WUI zone, takes two to three days. We’re Groundwork Construction Co. of Los Angeles. Call (888) 427-1733 and a live person answers, day or night, for a free on-site estimate.
How We Run a Door Installation, Day by Day
We don’t bid doors off a photo and a guess. The sequence below is what actually happens, and the points where you make a decision are called out so nobody is waiting on an approval mid-install.
Stage 1: Site check and measurement (day 0)
We come out and check the existing frame for plumb, square, and rot. Door openings are measured at three heights, and on a hillside Calabasas home we also check the header and the slope of the site at that wall, because a crooked frame on a canyon lot usually means foundation movement, not a bad door. You approve the measurements before anything gets ordered. This visit is free.
Stage 2: Product selection and ordering (days 1 – 14)
Stock doors ship in about a week. Custom sizes, most fiberglass entry systems, and anything with a factory-applied finish run two to six weeks depending on the manufacturer. This is your decision-heavy stage: material, hardware finish, glass, and whether you want a multi-point lock. Andersen and Pella both make solid exterior door systems for this market; your timeline largely depends on what you pick here.
Stage 3: Demo and prep (day 1 of install, 1.5 – 3 hours)
Old door comes off, the frame gets inspected for water intrusion, and the sill is checked for rot. Anything soft gets cut back to sound wood. We level and shim the opening and check the flashing and weather barrier at the head and sill. A door that leaks at the bottom in two years usually started here, not with the door itself.
Stage 4: Set, shim, and secure (2 – 3 hours)
The door goes in, gets shimmed at the hinges and lock points, and the frame is anchored. We check the reveal on all three sides before anything gets fastened off permanently. Then insulation, flashing tape, exterior trim, and siding-to-frame integration. Interior casing goes on the same day.
Stage 5: Hardware, seal, and final adjust (1 – 2 hours)
Handleset, deadbolt, closer if it’s a commercial-style unit, weatherstripping, sill seal, and caulk inside and out. We open and close the door a dozen times and adjust the strike plate until it latches with a push. You walk it with us. If anything’s off, it’s fixed before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Steel entry door – $700 – $1,800 installed for the unit alone. Heavy, strong, dents on impact. Standard in wildfire exposure areas because it’s noncombustible. Best for a main entry on a canyon lot facing the wind corridor.
- Fiberglass entry door – $900 – $2,400 installed. Won’t rust or dent, holds finish longer, and most models offer a woodgrain look. The mainstream choice for Calabasas estates; Andersen’s fiberglass entry lines are common on rebuilds.
- Solid wood – $1,400 – $3,500 installed. Beautiful, repairable, needs refinishing every few years in dry summer heat. Best for a covered court or interior stone-framed opening, not a west-facing unrecessed door.
- Interior hollow-core vs. solid-core – $450 – $850 hollow, $750 – $1,400 solid. Solid-core cuts sound through bedroom doors, which matters in a custom home with hard floors and vaulted ceilings.
- Impact-rated or WUI-compliant glazing – $400 – $1,200 premium over standard glass. Noncombustible frames and tempered glass. We recommend this on any door facing a slope with vegetation above it.
- Hardware – $80 standard knob to $500+ for a multipoint or smart lockset. Worth the money on an entry door you’ll use a thousand times a year.
What Door Installation Costs in Calabasas, CA
Interior door installation in Calabasas runs $450 – $1,400 installed. Exterior entry door installation runs $650 – $2,900. A new opening cut into a wall, with reframing and drywall repair, adds $1,200 – $3,500. Five variables push a job low or high:
- Door and frame condition. A frame that’s plumb and square is a half-day job. Rotted sills, water damage, or out-of-square openings add carpentry, sometimes drywall, and sometimes stucco work.
- Size and door type. A standard 3-0 interior slab costs less than a 42-inch custom pivot door in an estate entry. A sliding patio or French door pair costs more than a single unit.
- Material grade and finish. Painted steel is the floor. Factory-finished fiberglass in a premium color set is the ceiling. The gap can run $1,000 on the same opening.
- Permit scope. A straight replacement usually doesn’t need a permit. Cutting a new opening, adding a header, or changing a wall’s structural role does. On a hillside property, that may pull in slope review, which moves the number.
- Fire and WUI requirements. In a Very High Fire Hazard Severity Zone, noncombustible framing and ignition-resistant materials apply. Door and hardware spec changes here.
A written estimate from us lists the door, the labor, the hardware, the trim and caulk, and the disposal. Excluded: repainting adjacent stucco, structural repairs found after demo, and any permit fees if a permit is required. You’ll see those as line items before we start, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Calabasas Homes Specifically Do to This Job
Calabasas sits in the Santa Monica Mountains foothills, and that changes a door job in ways a flatland contractor in the San Fernando Valley won’t see. Entry doors on canyon and hillside lots in The Oaks, Calabasas Hills, and Mulholland Heights face a west-facing sun and Santa Ana wind combination that dries, cracks, and warps wood doors far faster than in a shaded inland yard. Rebuilds in the canyons after the Woolsey Fire carry WUI requirements – ignition-resistant doors, noncombustible frames, and fire-rated glazing where the opening is near a slope with fuel above it. Native coast live oaks are protected under Calabasas oak ordinances, and we’ve had a door replacement delayed by a setback review when the proposed opening moved a few inches toward a protected tree. Homes here range from 1960s-70s ranch stock with original frames to newer custom estates with engineered openings, and both bring their own failure patterns: older homes show sill rot and sagging frames, and newer builds often have drafts at the threshold because the door wasn’t shimmed properly to begin with. If the door work is part of a full Windows & Doors in Calabasas scope, we schedule the workflow together so openings get ordered once and installed in the right order. Homeowners who are also replacing a fence around a canyon property often pair this with Chain Link Fence in Calabasas or a Vinyl Fence in Calabasas, and we’ll quote the lot together if you want. Our Windows & Doors service covers the wider category, and you can see how we work across Calabasas before you call.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Calabasas
A single exterior door installation is a 4 to 7 hour job in one visit; an interior door is 2 to 3 hours. Rough openings or fire-rated entry systems with structural framing can take two to three days. Call (888) 427-1733 with your door type and we’ll give you a tight window before the truck shows up.
Straight replacement in an existing opening usually doesn’t require one; a new opening cut into a wall, a change to a load-bearing wall, or any structural reframing does. On a hillside parcel, a new opening can trigger slope and grading review alongside the building permit. Ask us at estimate and we’ll tell you in writing which path applies.
Yes, most door installations don’t touch plumbing or structure at all. Replacing in the same opening avoids both. Only a new opening or a full-size upgrade (going from 30-inch to 36-inch, for example) calls for framing work, and we’ll flag that at the free estimate before anyone commits.
Interior door installation is $450 – $1,400 and exterior entry door installation is $650 – $2,900, installed. Custom sizes, WUI-rated materials, and new openings push toward the upper end. Call (888) 427-1733 for a written, line-item quote – the free estimate takes about 45 minutes on site.
Every door installation we do is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s on top of the manufacturer’s product warranty on the door and hardware. Call (888) 427-1733 to see the written warranty terms with your estimate.
Get a Free Door Installation Estimate in Calabasas
Call (888) 427-1733 to schedule your free on-site estimate for door installation in Calabasas. A live person answers, day or night, and books you into a real window. We measure the opening, walk you through material and hardware options, and hand you a written line-item quote with upfront pricing – the number you see is the number you pay. Financing is available at 0% for 18 months, and projects over $10,000 take $1,000 off.
Written by the team at Groundwork Construction Co.