Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Palos Verdes Estates: What It Costs and How Long It Takes
A Chain Link Fence in Palos Verdes Estates typically runs $3,500 to $9,000 for a standard residential run, and most jobs are built in two to four working days once materials land and any city review is cleared. The number that matters is the linear-foot price and what’s buried under the ground at each post. Call (888) 427-1733 and we’ll walk your lot line and measure before we quote a single number.
How a Chain Link Fence Goes In, Stage by Stage
Chain link isn’t complicated, but the order of operations is where cheap jobs and good jobs split apart. Here’s what actually happens on your property.
Day 1: Line-out and utility marking
We walk the boundary with you first, set stakes at every corner and terminal, and confirm the fence line stays inside your property description – a real concern on Palos Verdes Estates hillside lots where the recorded line and the visible line have drifted apart over the decades. Before anyone digs, 811 gets called and utilities get marked. On sloped lots we also take elevations here so the fence follows the grade in stepped panels rather than trying to hold one level across a drop.
Day 1 – 2: Digging and setting posts
Posts go in first: terminal posts at corners and ends, line posts every 8 to 10 feet, and gate posts sized heavier because they carry the swing load. Holes are typically 2 feet deep, deeper on downhill corners where soil is looser. We set them in concrete (Sakrete bagged mix is a common choice) and let them cure before anything gets tensioned. This is the stage homeowners don’t see, and it’s the one that decides whether the fence is straight in five years.
Day 2 – 3: Rails, tension wire, and mesh
Top rail gets threaded and coupled, tension bars and brace bands go on, and the mesh is pulled from one terminal to the next. Stretching is where a fence looks either taut or saggy. We use a come-along at the end post and walk the tension evenly so the bottom stays parallel to grade. Anything under 5 feet tall on a hillside usually gets a bottom tension wire so dogs and debris don’t push the fabric out.
Day 3: Gates and hardware
Walk gates and drive gates get hung here, with hinges set to clear the post and latches aligned against the strike. This is where you decide swing direction and whether you want a self-closing spring – worth having if the gate borders a pool area or opens toward the street. Allow an hour per gate to hang and adjust properly.
Day 3 – 4: Cleanup and your walkthrough
Concrete collars get rounded and dirt gets backfilled and tamped. We haul off spoils, rake the line, and walk you through every post and gate before we call it done. You’ll get the 730-Day Done Right Promise in writing at that walkthrough, not buried in fine print.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
- Gauge of the mesh. 11.5-gauge is the common residential standard; 9-gauge is heavier and worth the upcharge on long runs or where kids and dogs lean on it. Salt air off the Pacific eats thinner wire faster.
- Coating. Galvanized is the budget pick and dulls to gray within a season or two. Vinyl-coated (green or black most often) costs more per foot but lasts noticeably longer in marine humidity and disappears against foliage.
- Height. 4-foot reads as a boundary marker, 5-foot is the middle ground, 6-foot gives real privacy backing and keeps a large dog contained. Higher means more mesh, more tension wire, and heavier posts.
- Top finish. Knuckle-top (twisted and cut smooth) is the standard and safer around kids. Barbed top is a commercial and security choice; we’d check with the city before spec’ing it on a residential lot.
- Gates. Single walk gate for foot traffic, double drive gate for vehicles, or a cantilever slider if your driveway is too sloped to swing. A double swing gate on a Palos Verdes Estates hillside needs heavier posts and often a drop rod.
Pick the coating and gauge together – that’s the real decision. Everything else follows from your lot.
What a Chain Link Fence Costs in Palos Verdes Estates, CA
Expect $3,500 to $9,000 for a residential chain link job in 90274. Here’s roughly where the money lands:
- Standard 4 – 5 foot run, galvanized, no gates: lower end of the range
- 6 foot, vinyl-coated, with a single walk gate: middle of the range
- Long runs, multiple gates, or heavy slope: top of the range
Four things push a job from the bottom to the top. Linear footage and corner count – every corner and terminal post adds work. Slope – Palos Verdes Estates lots step down hard, and stepped panels take more material and more labor than a flat run. Removal of an old fence – pulling and hauling an existing chain link or rusted steel adds a day. Gate count and style – a double drive gate with a cantilever slider costs several times a single walk gate. You’ll get a written line-item estimate: footage, gauge, coating, gate count, removal, and any design-review coordination, with no change orders later.
See the difference
Before
After
Before
After
Before
AfterWhat Palos Verdes Estates Homes Do to This Job
Palos Verdes Estates is fully built out – the Olmsted Brothers laid out the city in the 1920s and it hasn’t grown since. So we’re never running fence on a new lot; we’re working around 1950s-to-1970s custom ranchers and split-levels, mature landscaping, and hillside retaining walls that have already shifted. Marine humidity and salt air from the Pacific are the reason we push coated mesh over bare galvanized here: rust shows up years earlier than it does inland. The city’s own Art Jury and Planning Commission review exterior changes, so a fence that faces a street or alters a view corridor may need design sign-off before a permit is issued – a step contractors from outside 90274 routinely skip and then have to tear out. On bluffs and downhill lots, drainage concentrates at the line during winter rains, and we set posts deeper and check that the fence doesn’t channel water toward a neighbor’s slope.
Serving Palos Verdes Estates, CA – Our Local Coverage Area
We serve Palos Verdes Estates and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Palos Verdes Estates
Most residential runs are built in two to four working days once permits and materials are in hand. Add one to three weeks if the fence faces a street or a view corridor and needs Art Jury or Planning Commission review. Call (888) 427-1733 and we’ll give you a realistic window for your lot.
Often yes, especially for a street-facing fence or one that changes a view. The safe answer is to check with the city’s planning department before we order material, and we’ll handle the permit paperwork and design-review coordination where it applies. That’s part of what’s included in a written estimate.
Yes – a chain link fence is a ground-level project and rarely touches the house itself. The one thing we watch for is buried irrigation, pool plumbing, and gas lines along the property line, which is why the 811 utility mark matters. When a driveway is part of the same project, homeowners often pair the fence with Concrete Driveways & Concrete Work in Palos Verdes Estates so both get done in one pass.
Roughly $3,500 to $9,000 for a residential job, with the exact number set by footage, coating, height, gate count, and slope. Call (888) 427-1733 for an exact quote – estimates are free.
Every chain link fence we build is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years. That’s the workmanship side. Material warranties come from the manufacturer and we’ll tell you exactly what each one covers before you sign.
Get a Free Estimate on Your Chain Link Fence
If you’ve been putting off a chain link fence in Palos Verdes Estates, the first step is a free on-site estimate. We walk the line, mark the corners, check slope and gate placement, and hand you a written line-item quote – no surprises. Call (888) 427-1733. A live person answers, 24/7. If a full boundary rebuild is on your mind beyond the chain link itself, see our broader Fence Installation work or the full Fence Installation in Palos Verdes Estates page. We cover all of Palos Verdes Estates, and many clients pair the fence with Asphalt Driveways & Resurfacing in Palos Verdes Estates.
Written by the team at Groundwork Construction Co.