Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Window Replacement in Malibu Actually Involves
Window Replacement in Malibu typically runs $4,500 to $15,000 for a whole-home package, and most houses we open up are done in two to four working days once the units land on site. The work itself is straightforward; what stretches the schedule here is lead time on impact-rated glass and the inspection sequence that coastal and hillside lots trigger. Call (888) 427-1733 and we’ll walk your specific property before you commit to a number.
How a Window Replacement Job Runs, Day by Day
Every window replacement follows the same spine. What changes in Malibu is how much prep the openings need and how long the permit path takes before we ever touch a frame.
Stage 1: Measure and order (1 to 3 weeks)
We take rough openings at every location, check for racking and rot around the frames, and confirm which units are going to be impact-rated versus standard. Then the order goes in. Marvin and Andersen are our usual picks for coastal exposure, and lead times on impact glass are the single biggest variable in your calendar. You decide the window style and glass package at this stage, because nothing gets built until that’s locked.
Stage 2: Permit and inspection setup (1 to 6 weeks, runs parallel)
Replacement windows in kind usually move faster than new openings, but anything that changes the opening size or the structural header pulls a fuller permit. On bluff-edge and canyon lots we also confirm the project stays inside whatever coastal development approval already exists. We pull the permit and schedule the inspections, and you don’t chase anything.
Stage 3: Day one on site (roughly 6 to 10 hours for a typical first wave)
Crews arrive in uniform, background-checked, and set up containment so drywall dust and marine grit don’t migrate through the house. We demo the old sashes and frames, inspect the rough opening for dry rot and water intrusion, and repair any framing that won’t hold a fastener. Old units come out one at a time, so the house is never wide open.
Stage 4: Install, flash, and seal (the bulk of the job)
New units get set plumb and level, shimmed, and fastened with corrosion-resistant hardware. Then comes the part that decides whether you ever think about these windows again: sill pans, flashing tape, backer rod, and a sealant bead that actually adheres to the substrate. On west-facing walls we pay extra attention here because salt spray and wind-driven rain find every weak joint.
Stage 5: Trim, inspection, and walkthrough (1 to 2 days)
Interior trim goes back, exterior trim gets caulked and finished, and we run the inspection. Then we walk the house with you, open and close every unit, and hand over the paperwork. Most jobs finish in a single visit per opening wave; larger homes run across two or three days. Everything we install sits under our 730-Day Done Right Promise, so if a seal fails or a unit doesn’t operate right, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on This Job
Window replacement isn’t one decision, it’s five. Here’s what each one costs you in dollars and in trade-offs.
- Frame material: Vinyl is the value pick and handles most of what Malibu throws at it, though it can bow under sustained heat on unshaded west walls. Fiberglass costs more but holds its shape and tolerates salt air better. Wood-clad aluminum is the top of the line and the usual choice for architectural homes that need a slim profile.
- Glass package: Standard dual-pane works on sheltered elevations. Impact-rated laminated glass adds cost but is the sensible call on any window facing open ocean or in a fire-hazard zone. Low-E coatings cut heat gain on sun-baked exposures.
- Operating style: Fixed picture windows cost least per square foot. Casements seal tighter against wind than sliders. Awning units work well where exterior space is tight.
- Hardware and finish: Stainless or marine-grade hardware is worth the small upcharge here. Standard steel hardware pits within a few seasons on the ocean side.
- Trim and interior finish: Reusing existing trim keeps cost down. New trim and casing adds a finish line item but lifts the whole room.
Most homeowners land somewhere in the middle, and that’s fine. We quote line-item so you can see exactly what each upgrade adds.
What Window Replacement Costs in Malibu, CA
A typical whole-home window replacement in Malibu lands between $4,500 and $15,000. Impact-rated units on an exposed bluff property push toward the high end, sometimes past it. Here’s roughly where the money goes:
| Line item | Typical range |
|---|---|
| Standard dual-pane window replacement | $4,500 – $9,500 |
| Whole-home replacement, mixed elevations | $8,000 – $15,000 |
| Impact-rated window package | $8,000 – $25,000 |
| Per-window average, standard unit | $600 – $1,200 |
Five variables move you up or down that scale: the number and size of openings, whether the existing frames are sound or rotted, the glass rating you choose, whether any opening size changes and needs structural work, and the permit scope. Rot repair and reframing are the most common surprises, which is why we inspect openings before quoting instead of after.
Your written estimate covers removal and disposal, new units, flashing and sealant, trim, permit, and inspection. It does not cover stucco patching beyond the immediate opening, interior painting, or blinds. Upfront pricing, no surprises: the number you sign is the number you pay, and projects over $10,000 take $1,000 off, with 0% financing for 18 months available.
See the difference
Before
After
Before
After
Before
AfterWhat Malibu Homes Specifically Do to This Job
Start with the wind. Santa Ana events come through these canyons with real force, and a failing window or door assembly is the first thing that lets water and debris inside. We see it every season on older PCH frontage bungalows: dried-out glazing, cracked seals, sashes that no longer latch tight. That’s a window replacement that’s already overdue before the first Santa Ana of the year.
The exposure shapes the spec. Salt spray pits standard hardware fast, so stainless and marine-grade fasteners are routine on anything west-facing. Fire-hardening requirements in the chaparral interface push toward noncombustible exterior trim and ember-resistant venting around the openings. Coastal Commission jurisdiction on bluff and canyon lots means we confirm your existing approval before ordering units, because approval delays can add weeks.
Access matters too. Latigo and Encinal carry the only route to a lot of hillside sites, so deliveries get scheduled around narrow grades and turnaround limits. We coordinate that in advance rather than discovering it on install day. Housing stock here runs from mid-century bungalows to contemporary canyon estates, and both show the same failure pattern: decades of UV and salt working on seals long before the glass itself fails. If you’re planning this alongside other exterior work, it’s often part of a full Windows & Doors in Malibu scope, and homeowners often pair this with Aluminum Fence in Malibu or Vinyl Fence in Malibu while crews are already on site. Our Windows & Doors service covers the full range, and we handle Malibu from the PCH corridor up into the canyons.
Serving Malibu, CA – Our Local Coverage Area
We serve Malibu and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Window Replacement in Malibu
Most whole-home window replacement jobs take two to four working days on site, but plan on three to eight weeks total once you factor in impact-glass lead times and permitting. Call (888) 427-1733 for a realistic timeline on your property.
Replacement in kind usually needs a permit, and any change to opening size or structural header definitely does. We pull it, schedule the inspections, and hand you the signed-off paperwork. Call us and we’ll tell you what your specific scope requires.
Yes, in the large majority of cases the rough opening stays as-is and no plumbing or structural work is touched. Only when a frame is rotted or you’re enlarging an opening does structural repair enter the scope, and we flag that during measurement, not mid-job.
Expect $4,500 to $15,000 for a typical whole-home package, with impact-rated units running $8,000 to $25,000 on exposed properties. Call (888) 427-1733 for a line-item estimate – estimates are free.
Every window replacement we do is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers our workmanship for two full years, well beyond what most contractors offer.
Get a Free Window Replacement Estimate in Malibu
Call (888) 427-1733 to schedule a free on-site estimate for window replacement in Malibu. A live person answers around the clock, and we’ll measure the openings, check the frames for rot, and hand you a written line-item quote with the permit and inspection included. No pressure and no vague numbers – just a straight answer on what your windows need and what it costs.
Written by the team at Groundwork Construction Co.