Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in Calabasas, CA: What It Costs and How Long It Takes
Window Replacement in Calabasas typically runs $4,500 to $15,000 for a whole-house package, and most jobs take two to four working days from demo to final trim. The number moves based on window count, glazing package, and whether we’re matching a custom finish on a Mediterranean estate or swapping standard units in a 1970s ranch home. Call (888) 427-1733 and we’ll walk your house, count the openings, and give you a written line-item quote before anything gets ordered.
How We Run a Window Replacement Job, Stage by Stage
Most contractors describe window replacement as a two-day blur. It isn’t. Here’s the actual sequence we follow on Calabasas homes, with the decisions you make at each stop.
Stage 1: Walkthrough and Measure (Day 0, about 90 minutes)
We open every window in the house, check the frames for rot, and note which units are original versus already replaced. On hillside and canyon lots we pay close attention to the downhill-facing walls, because wind-driven rain and Santa Ana dust load those elevations harder. You decide here whether we’re doing full-frame replacement or pocket replacement, which changes everything downstream.
Stage 2: Order and Permit (Weeks 1 – 4, mostly waiting)
Full-frame jobs usually require a permit pulled through the City of Calabasas; pocket replacements often don’t. Lead times on custom sizes and finishes run three to six weeks. This is when you lock your glass package, frame color, and hardware. Nothing gets fabricated until you sign off on the spec sheet.
Stage 3: Prep and Demo (Day 1)
We lay drop cloths, pull interior trim, and cut the old units out. Expect dust and noise, and plan to be out of the house or in a back room for the day. The house stays weather-tight before we leave because every opening gets a temporary seal.
Stage 4: Install and Flash (Days 2 – 3)
New units go in with proper flashing, shims, and low-expansion foam. On stucco homes we cut back and patch the exterior skin cleanly; on wood-sided estates we match siding profile and paint line. Each window gets checked for plumb, square, and smooth operation before we move to the next.
Stage 5: Trim, Seal, and Final Walk (Day 4)
Interior trim goes back on, caulk lines get finished, and we hand you a walkthrough. You open and close every window yourself. Any unit that binds, whistles, or shows a gap gets fixed before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Nobody picks windows every year, so the menu can feel overwhelming. Here’s what actually matters when you’re choosing.
- Full-frame vs. pocket replacement: Full-frame replaces the whole assembly including the frame, which lets you fix rot and improve insulation. It costs more and takes longer. Pocket replacement drops a new sash into the existing frame; faster and cheaper, but only works if the frame is sound.
- Vinyl vs. fiberglass vs. wood-clad: Vinyl is the value play and holds up well in dry heat. Fiberglass handles temperature swings with less expansion. Wood-clad (Andersen and Marvin are the names we trust) matches the aesthetic of Mediterranean and Spanish-style estates, and it’s what most of the high-end Calabasas custom homes in The Oaks and Calabasas Hills choose.
- Glass package: Standard dual-pane is fine. Low-E coatings and argon fill cut heat gain on west-facing walls. Tempered glass is required in some locations; we’ll flag those for you during the walkthrough.
- Style and grille: Fixed, casement, slider, or awning. Grille patterns that match the original architecture are often what keep a hillside estate looking right rather than remodeled.
- Fire-rated assemblies: Because Calabasas sits in a Very High Fire Hazard Severity Zone, exterior-adjacent windows sometimes need upgraded assemblies to meet ignition-resistant standards. We’ll call out exactly which openings that applies to.
If the window work is part of a broader exterior update, this trades often pair with Aluminum Fence in Calabasas for pool and property lines, or Vinyl Fence in Calabasas where privacy and durability matter more than a metal look.
What Window Replacement Costs in Calabasas, CA
Whole-house window replacement in Calabasas lands between $4,500 and $15,000 for most homes, with high-end customized estates and impact-rated packages pushing the high end. Here’s how we see that range break down:
- Window count: A 10-window 1960s ranch runs the low end. A 30-window custom estate runs the top.
- Frame material: Vinyl sits at the bottom. Fiberglass lands in the middle. Wood-clad Andersen or Marvin units sit at the top and match premium home architecture.
- Glass and coating: Standard dual-pane through Low-E, argon, and impact-rated systems in a wide spread. Each upgrade adds real cost but real performance.
- Condition of existing frames: Rotted sills, damaged stucco, or old aluminum frames that need to be cut out push the price up. Pocket replacements keep it down.
- Permit scope: Full-frame replacements in Calabasas usually trigger a permit and inspection; pocket replacements often don’t. That’s typically a few hundred dollars difference plus a bit of schedule.
A written estimate from us lists each window line by line, what glass package you’re getting, permit costs, and disposal. What it doesn’t pull from some mystery line item is labor – that’s baked in and quoted upfront. Our pricing is the number you see, and the 730-Day Done Right Promise covers the work behind it.
See the difference
Before
After
Before
After
Before
AfterWhat Calabasas Homes Specifically Do to This Job
Calabasas buildings fight the hillside. On canyon roads and sloped lots, wind-driven rain finds every seam, so flashing detail matters more here than on a flat San Fernando Valley ranch. The coast live oak ordinances that protect trees on sloped properties also mean we’re careful about grading around root zones during install, which occasionally reshapes where we stage materials. In The Oaks and Mulholland Heights, HOA architectural review is often stricter than the City permit process, so exterior frame color and grille profile usually get approved before anything ships. And the fire standards here – Chapter 7A ignition-resistant construction, ember-resistant venting – mean those requirements carry into window selection on homes bordering the WUI. Post-Woolsey rebuilds in the canyons sometimes come with engineered openings already specified, and we work from those plans. For a broader look at doors, sliding systems, and impact assemblies that pair with this work, see our Windows & Doors in Calabasas page.
We cover the whole of Calabasas, plus nearby Topanga, Agoura Hills, Malibu, and Santa Monica. If you’re planning a full exterior refit alongside the windows, our Windows & Doors service covers the full scope, and we’ve handled ADU and addition work here using prefab partners like Cover and Mighty Buildings where the project calls for it.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Window Replacement in Calabasas
Most whole-house window replacements take two to four working days once materials arrive, and the lead time to order and ship runs three to six weeks. Custom sizes and finishes add to the front end. Call (888) 427-1733 for a timeline specific to your house.
It depends on whether you’re doing full-frame or pocket replacement. Full-frame work typically requires a permit through the City of Calabasas; pocket replacements often don’t. We pull permits as needed and walk every inspection so nothing falls back on you.
In most cases, yes. Pocket replacement leaves the existing frame intact and swaps only the sash. Full-frame replacement disturbs the wall opening, which is where we get better insulation and rot repair. We’ll tell you honestly which your home needs after we look.
Whole-house window replacement in Calabasas runs $4,500 to $15,000 for most homes. Wood-clad units, impact-rated glazing, and custom sizes push to the top; standard dual-pane vinyl on a mid-size ranch sits at the bottom. Call (888) 427-1733 for an exact written quote – estimates are free.
Every window installation we do is covered by our 730-Day Done Right Promise. If something isn’t right, we come back and make it right – for two full years after the job. Calls are answered by a live person around the clock, and no voice message goes unanswered.
Let’s Get a Real Number on Your Windows
Window Replacement in Calabasas starts with a free on-site estimate. We walk the house, count the openings, flag anything unusual about the frames or hillside exposure, and hand you a written line-item quote with no surprises attached. Projects over $10,000 are eligible for $1,000 off, and 0% financing for 18 months is available. Call (888) 427-1733 to schedule yours.
Written by the team at Groundwork Construction Co.