Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Malibu: What You’re Actually Getting Into
Concrete driveways and concrete work in Malibu usually run $4,500 – $12,000 for a new slab and $5,000 – $14,000 for a full replace, and most residential pours take 3 – 7 working days once the site is ready. On canyon and bluff lots the clock starts earlier, because Coastal Commission review and geotechnical sign-off can stretch the front end by weeks before a single truck climbs the grade. Call (888) 427-1733 for a free on-site estimate and a written, line-item quote.
Day One to Final Cure: How We Pour a Malibu Driveway
Concrete work rewards patience and punishes shortcuts, and on Malibu’s grades the sequence matters even more than the mix design. Here’s the honest order of operations.
Stage 1: Site walk, survey, and geotech (days to weeks)
We start by measuring the drive, checking the cross-slope, and looking hard at what’s underneath. On hillside and bluff-edge lots a current geotechnical slope stability report is often a permit prerequisite, and we help you scope what that report needs to cover. You decide here whether the job is a resurface, a partial replacement, or a full tear-out and recast.
Stage 2: Permits and approvals (2 – 10 weeks)
Anything that changes the driveway footprint, drainage, or impervious surface in Malibu can trigger permits and, near the coast, Coastal Development Permit review. We pull the permits and coordinate inspection and inspection sign-off so the sequence is right. This is the stage where canyon-access projects can lose the most time, and it’s why we front-load the paperwork.
Stage 3: Demo, excavation, and subgrade prep (1 – 3 days)
Old slabs come out, we excavate to grade, and we compact the subgrade in lifts. This is where a driveway succeeds or fails: proper base compaction and a true cross-slope for drainage are the difference between a drive that lasts and one that cracks through the first Santa Ana season. You’ll see the base inspected before any concrete shows up.
Stage 4: Formwork, rebar, and the pour (1 – 2 days)
We set forms, place rebar or mesh, and pour. On steep canyon drives we schedule the truck carefully around narrow, winding grades like Latigo and Encinal, since access drives the schedule as much as the mix. You pick the finish and the joint layout before the pour, not after.
Stage 5: Finishing, curing, and joint sealing (1 – 5 days)
Finish, control-joint cuts, and curing follow the pour. Concrete keeps gaining strength for weeks, so we control the cure and set the timeline for when you can park on it. You get a walkthrough, and the 730-Day Done Right Promise backs the workmanship in writing: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Spec Choices You’ll Actually Decide
Most of the value of a concrete conversation is in the choices, and the honest trade-offs matter more than the marketing.
- Standard broom finish: the lowest-cost, best-traction default for a drive. It hides tire marks and holds up to salt spray and sun. Suits driveways you want practical and repairable.
- Exposed aggregate: textured, slip-resistant, and good on grades. Costs more than broom and needs periodic resealing to keep the surface from dulling.
- Concrete with a decorative scored or sawcut pattern: a middle path between plain and fully decorative, and it reads cleanly against modern architecture. You pay mostly for labor and layout time.
- Thickness and reinforcement: standard residential drives sit around 4 inches; where a heavy truck or a steep grade is involved we go thicker with heavier reinforcement. More concrete costs more, and on hillside access it’s worth it.
- Drainage and erosion control: on Malibu grades, channels, swales, and the slope of the pour are decisions, not afterthoughts. Winter rain on steep terrain is where a poorly planned drive erodes its own base.
- Corrosion-resistant hardware and fasteners: marine-grade exterior hardware is routine here, and we specify accordingly on anything that ties into the drive or the house.
If the driveway is part of a larger hardscape job, we’ll talk through the wider scope on our Driveway & Pavers in Malibu page and keep the concrete work cleanly scoped.
What Concrete Driveways & Concrete Work Costs in Malibu, CA
Expect $4,500 – $12,000 for a concrete driveway installation and $5,000 – $14,000 for a full replacement. That range is the market truth for Malibu, and the number that lands at the low or high end depends on a handful of real variables:
- Size and slope: square footage is the base, but a steep drive needs thicker sections, more reinforcement, and more labor to pour and finish.
- Existing condition: a clean tear-out is cheap to demo. A failed slab over soft or shifting subgrade means excavation, haul-off, and base remediation.
- Access: canyon roads and narrow hillside drives can require smaller trucks and staging, which adds time and cost.
- Permit and geotech scope: coastal or geotech review adds professional fees and time before the pour.
- Finish and drainage: decorative finishes and drainage engineering push toward the top of the range; a straight broom-finish pour sits near the bottom.
Our estimate is a written line-item quote with upfront pricing, so the number you see is the number you pay, no change-order surprises. It’s free, and we’ll tell you plainly what’s included (demo, base, forms, reinforcement, pour, finish, joint cutting, cleanup) and what’s not (geotech reports, specialized drainage engineering, and any structural work the site calls for). If financing helps, 0% for 18 months is available, plus $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Malibu Homes Specifically Do to This Job
Concrete on the Malibu coast is not a flat-lot proposition. Nearly every project here is a hillside or bluff-edge build governed by coastal development permits, geotechnical slope stability reports, and fire-hardening requirements, so the design conversation starts before any permit is pulled. Canyon roads like Latigo and Encinal are the only access for many sites, and we schedule concrete trucks and material deliveries around those narrow, winding grades. The marine layer and salt spray drive our fastener and hardware choices toward corrosion-resistant, marine-grade options, and the fire-prone chaparral interface means noncombustible detailing and Class A assemblies are the norm. We work homes from mid-century PCH bungalows to modern hillside estates, and on legacy drives the common failure is the same: an old slab with no real base and no drainage, cracking through the first wet winter. If your project grows into a converted or added structure, homeowners often pair this with a Garage Conversion ADU in Malibu or a New Detached ADU in Malibu, and we scope the concrete and the building together so access and drainage are planned once. We cover every corner of Malibu and the surrounding canyons, and our broader Driveway & Pavers work backs it up.
Serving Malibu, CA – Our Local Coverage Area
We serve Malibu and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Concrete Driveways & Concrete Work in Malibu
A typical residential pour takes 3 – 7 working days once permits and site prep are done, but the front end is where Malibu projects differ. Geotechnical review and Coastal Development Permit approval near the coast can add weeks to months before we pour. Call (888) 427-1733 for a free estimate and a realistic schedule for your site.
Often yes, especially if you’re changing the footprint, grade, or drainage, or the site is in the coastal zone. We pull the permits and coordinate inspection so the sequence is correct. Call (888) 427-1733 and we’ll tell you what your specific drive is likely to require.
In most cases yes. A driveway replacement is surface and subgrade work, and utilities are usually deep enough to leave alone. Where a footing, utility, or retaining structure sits in the way, we flag it at the site walk and price it into the written quote. Call (888) 427-1733 to schedule that walk.
Concrete driveway installation runs $4,500 – $12,000 and full replacement $5,000 – $14,000, with slope, access, and finish moving you toward the top of that range. Our estimate is line-item and free. Call (888) 427-1733 for an exact quote.
Every project is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right. Call (888) 427-1733 to see the terms before you commit.
Get a Free Estimate on Your Malibu Concrete Work
Pouring concrete on a coastal or canyon lot is a decision worth getting right the first time. Call (888) 427-1733 to schedule a free on-site estimate for concrete driveways and concrete work in Malibu. A live person answers around the clock, we walk your site, and you get a written line-item quote with no surprises, plus the 730-Day Done Right Promise backing the work.
Written by the team at Groundwork Construction Co.