Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Agoura Hills, CA: What the Job Actually Involves
Custom & geometric windows in Agoura Hills typically run $8,000 – $25,000 for a full-house package of specialty shapes, and a single arched or angled unit lands closer to $1,200 – $4,500 installed, depending on size and glass package. The job moves in two phases: a template-and-order phase that runs four to eight weeks because geometric units are built to the opening, then a one-to-three-day install once the frames arrive on site. Call (888) 427-1733 and we’ll walk your openings with you before anything gets ordered.
How a Custom & Geometric Window Job Runs, Stage by Stage
Specialty shapes don’t tolerate a sloppy measuring day. Here’s the sequence we hold to, and where you make the calls.
Day 1: Site walk and rough openings
We measure every rough opening against the framing, check the plumb and square of each one, and photograph the exterior trim and stucco returns. On Agoura Hills hillside homes this is also where we flag out-of-square openings that a stock unit would have hidden with wide trim. You decide the window style and whether each opening stays where it is or shifts.
Days 2 – 3: Templating the shapes
Arches, half-rounds, trapezoids, and eyebrow windows get a physical template so the manufacturer builds to the actual opening, not a nominal size. This is the step that separates a real custom order from a catalog unit that shows a gap. You confirm glass performance (tempered, laminated, low-E) and finish before the order is released.
Weeks 4 – 8: Fabrication
Geometric units are made to order, so the wait is real. Lead times stretch when a shape needs curved glazing or a specialty clad exterior. We give you a firm delivery window up front and update it as the factory does.
Install days: One to three days
Most residential packages of five to twelve openings are set in a single visit, and larger homes or heavy stucco work run two to three. Frames get shimmed, leveled, flashed, and sealed. Interior trim and exterior flashing details are finished the same visit where codes allow.
Final walkthrough and inspection
We check operation, weatherstripping, and glass; then pull permits and coordinate the inspection if your scope requires one. You get a line-item sign-off and the 730-Day Done Right Promise in writing – if it isn’t done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Geometric Windows
- Wood with a clad exterior (Andersen, Marvin): the honest choice for Old Agoura and Morrison Ranch homes where the interior should read as wood. Cladding handles the sun and Santa Ana wind. Costs the most and needs periodic caulk checks around the exterior trim.
- Vinyl frames: the budget play. Holds up to California sun and needs no painting, but wide profile lines can look heavy on an arched unit and vinyl doesn’t take a true stain finish.
- Fiberglass: stable in heat, takes a paint finish, and won’t warp on a southwest-facing wall. A solid middle ground for canyon lots.
- Glass package: tempered for any unit near a floor or door; laminated or dual-pane low-E where the sun exposure is heavy. Emergency egress glass in sleeping rooms is code, not optional.
- Interior finish: bare wood ready for stain, factory-primed for paint, or a pre-finished clad reveal. Decide before fabrication – changing it later means a new order.
What Custom & Geometric Windows Cost in Agoura Hills, CA
Expect $8,000 – $25,000 for a full specialty package here, and $1,200 – $4,500 for a single arched or angled unit installed. Interior and exterior trim, flashing, and permit fees are separate line items on the written quote.
| Line item | Typical range |
|---|---|
| Single geometric unit (arched, trapezoid, eyebrow) | $1,200 – $4,500 |
| Full-house custom package (5 – 12 openings) | $8,000 – $25,000 |
| Rough-opening reframing (per opening) | quoted per job |
| Permit and inspection fees | quoted per scope |
Five things push the number toward the high end: the number of true custom shapes, curved versus straight glazing, interior wood finish versus paint-grade, existing wall condition (out-of-square openings cost labor), and whether the scope requires structural changes. Low end is stock-adjacent arches in standard sizes on a straightforward tract home.
See the difference
Before
After
Before
After
Before
AfterWhat Agoura Hills Homes Do to This Job
The Santa Monica Mountains foothills along the 101 corridor produce a different set of window problems than flat-valley homes a few miles east. Steep canyon lots and brush-clearance rules mean exterior access often needs scaffolding, and wildfire-interface construction standards in the high fire-severity zone shape which exterior trim and flashing materials we specify. Old Agoura’s horse properties on large rural lots add private access roads and well-and-septic site conditions that change how equipment gets to the house. The tract homes in Morrison Ranch and the older split-levels work well for a same-size geometric replacement, but the sloped lots and winter storm runoff push us to check drainage at every sill. This is part of a full Windows & Doors in Agoura Hills scope for many homeowners, and we cover every corner of Agoura Hills, from the 91301 and 91376 ZIP codes to the canyon roads above town. Our Windows & Doors service handles everything under it.
Serving Agoura Hills, CA – Our Local Coverage Area
We serve Agoura Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Agoura Hills
Most jobs take four to eight weeks from order to install, plus one to three install days on site. The lead time is fabrication; the install itself is quick when openings are ready. Call (888) 427-1733 for a delivery estimate on your specific shapes.
Most window replacements in Agoura Hills need a permit, and geometric units frequently trigger a plan review because the shape and fire-rated exterior trim come under closer scrutiny. We pull the permit and coordinate the inspection; you don’t chase paperwork. Call (888) 427-1733 to talk through your scope.
Yes, if the existing opening is square and the unit is a straight replacement that matches the rough opening. Reframing is only needed when the shape changes or the opening is out of square. We confirm on the site walk before you commit.
Specialty units run $1,200 – $4,500 each and a full-house package lands at $8,000 – $25,000. Price moves with shape count, curved glazing, finish, and wall condition. Call (888) 427-1733 for a line-item quote – estimates are free.
Our installation workmanship is backed by the 730-Day Done Right Promise, with the manufacturer’s window warranty covering the unit itself. The two run together, and we hand you both in writing. Call (888) 427-1733 to see a sample.
Get Your Custom & Geometric Windows Estimate in Agoura Hills
Call (888) 427-1733 for a free on-site estimate on Custom & Geometric Windows in Agoura Hills. A live person answers, 24 hours a day. We’ll walk the openings, photograph the details, and hand you a line-item written quote with upfront pricing and no surprises – plus the 730-Day Done Right Promise behind the work. Most jobs also pair well with Concrete Driveways & Concrete Work in Agoura Hills or Asphalt Driveways & Resurfacing in Agoura Hills when the exterior gets reworked at the same time.
Written by the team at Groundwork Construction Co.