Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in Culver City: What It Costs and How Long It Takes
Window replacement in Culver City, CA typically runs $4,500 to $15,000 for a whole-house package, and most jobs are finished in one to three days once materials arrive. The number moves with window count, frame material, and how much repair the original 1920s-40s openings need behind the trim. For a firm quote on your address in 90232 or 90230, call (888) 427-1733 and we’ll walk the house with you.
How our window replacement process runs, stage by stage
Replacing windows is a sequence, not a single visit. Here’s what actually happens from the first walkthrough to the final inspection, and where your decisions land.
Stage 1: On-site measure and scope (day 0, about 60 – 90 minutes)
We measure every opening, check the existing frames for rot and stucco cracking, and note which units are original wood versus already-swapped vinyl. This is where you decide the frame material and whether we’re doing a full-frame replacement or a pocket install. Carlson Park and Sunkist Park jobs often reveal stucco damage at the sill, so we price that repair on the spot rather than surprising you later.
Stage 2: Product selection and written quote (2 – 5 days)
You choose glass package, frame finish, and grid pattern. We hand you a line-item estimate with no change-order surprises. You’ll also decide whether to add screens, which exterior trim profile to match, and whether any opening gets resized. If you’re pairing this with a wider project, homeowners often roll the work into a full Windows & Doors in Culver City scope so the trim carpentry is continuous.
Stage 3: Permit and order (1 – 3 weeks)
Most full-frame replacements in Culver City require a permit, and the city’s review of facade changes can add time in the Carlson Park Historic District. We pull the permit, order the units, and give you a firm install date. Lead times on Andersen and Marvin orders run longer than stock vinyl, so this is the stretch where patience pays off.
Stage 4: Installation (1 – 3 days depending on count)
Day one is demo and prep: old sashes out, openings squared, any rotted framing sistered in, sill pans set. Day two is setting and flashing, then interior trim. Day three is exterior stucco patching, sealant, and cleanup. Most single-family jobs finish in this window; a 20-plus window house might stretch to four.
Stage 5: Inspection and walkthrough (same week)
The city inspects framing and flashing, and we walk every window with you: latch tension, weatherstrip fit, and water test at the sill. Anything off gets corrected before we close the job under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Vinyl frames: The budget end at $4,500 – $9,000 for a typical house. Low maintenance, decent thermal numbers, but they can’t be painted and they read as modern against a Spanish bungalow’s original wood.
- Fiberglass frames: Middle of the range, holds paint, expands and contracts less than vinyl in Culver City’s warm-dry summers. Good fit for a 1950s rancho near Sepulveda.
- Wood-clad (Andersen, Marvin): The top of the $4,500 – $15,000 range. Wood interior, aluminum or clad exterior, paint-grade or stain-grade. This is what we specify on the 1920s-40s Spanish homes where the original window profile matters to the facade.
- Glass package: Dual-pane low-E is standard now; laminated glass helps with street noise, which matters on busy Washington Boulevard lots.
- Full-frame vs. pocket: Full-frame replaces the whole unit including frame, which is the right call when the original wood is rotten. Pocket installations are faster and cheaper but only work when the existing frame is sound.
What Window Replacement costs in Culver City, CA
Whole-house window replacement here lands between $4,500 and $15,000. Here’s what moves a job to the low or high end:
| Factor | Low end | High end |
|---|---|---|
| Window count | 6 – 8 units | 18 – 25+ units |
| Frame material | Vinyl | Wood-clad (Andersen, Marvin) |
| Install type | Full-frame with framing repair | |
| Stucco/trim repair | Minor patching | Sill rot, lath repair, tile matching |
| Permit scope | Standard replacement | Historic District facade review |
A written estimate from us includes units, installation labor, flashing and sealant, interior trim, permit fees, and haul-away. It does not include structural reframing if we find hidden rot (we price that as a line item once exposed), painting of new trim, or window coverings. Financing runs 0% for 18 months, and projects over $10,000 take $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Culver City homes specifically do to this job
The housing stock is the story here. Carlson Park and Culver Crest are full of 1920s-40s Spanish bungalows with stucco walls and original wood windows, many with the original lath still under the plaster. When we pull a window, we routinely find the lath-to-stud attachment has loosened or the sill has rotted from decades of ocean moisture working into the wood. Culver City’s mild wet winters and persistent coastal damp accelerate that decay, and the Santa Monica fault’s proximity means we frame every opening to current seismic detailing. On Culver Crest, wildfire-adjacent hillside rules push toward fire-rated glazing and ember-resistant trim. The city’s Cultural Affairs Commission can require design review for facade changes on Carlson Park Historic District homes, so we plan that review into the schedule rather than treating it as a surprise. Nearby, homeowners often pair window work with our Vinyl Fence in Culver City installation for the backyard, since we’re already set up on site.
Serving Culver City, CA – Our Local Coverage Area
We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Window Replacement in Culver City
Most whole-house jobs take one to three days of install time, plus one to three weeks for permitting and product lead time. A 20-window wood-clad order can add another week. Call (888) 427-1733 for a timeline specific to your address.
Yes, full-frame replacement requires a permit and inspection; same-size pocket replacements in some cases do not. Because Culver City’s historic district rules can trigger design review on facade-facing windows, we confirm the requirement before ordering anything.
In nearly every case, yes. Windows sit in the wall opening, not the plumbing or structural frame, so replacement doesn’t disturb either unless we find hidden rot that requires sistering a stud. We flag that before demo.
Expect $4,500 to $15,000 for a whole house, with the range driven by count, frame material, and repair scope. A line-item written estimate is free; call (888) 427-1733 for exact numbers.
Every window we install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential space. Manufacturer warranties on Andersen and Marvin units run separately and are passed through to you in writing.
Get a free window replacement estimate in Culver City
Call (888) 427-1733 to schedule a free on-site estimate for window replacement in Culver City. A live person answers around the clock, we walk the house, measure every opening, and hand you a written line-item quote with no surprises. If you’re also considering fence or paver work, we can fold Aluminum Fence in Culver City into the same visit. See our wider Windows & Doors service and our Culver City coverage area for the full picture.
Written by the team at Groundwork Construction Co.