A Groundwork company - serving Los Angeles, CA
Chain Link Fence in Culver City, CA | Groundwork Construction Co. of Los Angeles

Chain Link Fence in Culver City - Free On-Site Quote, HOA Approval Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Chain Link Fence in Culver City, CA: What It Costs and How Fast It Goes In

A chain link fence in Culver City runs $3500 – $9000, and most residential yards are measured, permitted and installed in about two to four weeks from the day you approve the estimate. The fence itself goes up fast, often in a single visit. The waiting happens before that: surveys, city permits, and scheduling with the neighbors whose property line you share. Call (888) 427-1733 to set up a free on-site estimate.

Call (888) 427-1733

How We Build a Chain Link Fence, Start to Finish

Chain link isn’t complicated, but it is unforgiving of shortcuts. A post set in loose soil or two inches off the property line will show up the first winter. Here’s the sequence we actually run, and where you make decisions.

  • Stage 1: Site visit and line check (day 1, about 60 minutes). We walk the property, find your survey stakes or pull the recorded plat, and confirm the run. You decide the height (typically 4 ft for a side-yard divider, 6 ft for privacy along an alley-facing yard) and whether the fence sits on the property line or inside it by a few inches.
  • Stage 2: Permits and utility locating (days 2 through 7, occasionally longer). Culver City requires a fence permit for anything over the height threshold, and we submit the application along with utility locating so nobody drives a post through a gas line or irrigation main. You sign the application; we handle the rest.
  • Stage 3: Layout and demo (day of installation, first two hours). We string the line, mark every post at consistent 8-to-10-foot spacing, and remove any old fence, footings or vegetation in the way. Debris leaves the same day.
  • Stage 4: Posts and concrete (day of installation, hours three through five). Holes get dug to depth and set with concrete footings, and chain-link posts need roughly 24 to 48 hours of cure before tensioning. This is the stage where the buried part of the job matters more than anything you’ll see.
  • Stage 5: Rails, mesh and gates (return visit, half a day). Top rail, tension wire, mesh stretched and tied, and gates hung with proper swing clearance. You walk the line with us, and anything that isn’t right gets corrected before we leave.

You’ll be asked to decide three things in roughly this order: fence height and color, gate locations and widths, and whether you want privacy slats added. Everything else is on us, from the permit to the final tension check.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Chain Link Options You’ll Choose Between

Chain link is rarely one product. The decisions you make here are what separate a fence that lasts 20 years from one that sags in five.

  • Galvanized steel versus vinyl-coated. Bare galvanized is the budget choice and holds up well in our dry inland-tilted summers. Vinyl-coated (often sold as “color chain link” in black or green) costs a bit more but blends into landscaping and doesn’t leave rust streaks against stucco walls.
  • Gauge of wire and pipe weight. Mesh comes in different wire gauges, and posts and rails come in different wall thicknesses. Thinner pipe is what fails first when a gate gets slammed or a car nudges the line. Ask for the heavier schedule on gate posts no matter what you choose for the run.
  • Top rail versus tension wire. Top rail gives a clean, stiff line and pairs better with gates. Tension wire is less expensive and works fine for long, straight residential runs.
  • Gate hardware. Hinges, latch and post reinforcement get abused more than any other part of a chain link fence. Self-closing latches are worth the small upgrade if kids or a dog use the gate daily.
  • Privacy slats or a windscreen. Slats add cost and wind load. In Culver City’s gusty afternoons along the Sepulveda corridor, we spec posts one size heavier when slats go up.

Powder-coated systems from brands like Ameristar sit at the top of the residential price band; standard galvanized pipe and mesh from a regional supplier sits at the bottom and performs well in our climate when installed correctly.

What a Chain Link Fence Costs in Culver City, CA

The range for this job is $3500 – $9000. A straightforward side-yard run with one gate usually lands near the bottom; a full-perimeter fence on a corner lot with multiple gates and slats lands near the top.

  • Linear feet and height: taller fence means longer posts, more concrete and more mesh, and costs rise roughly in step.
  • Grade of materials: heavier gauge mesh and thicker pipe wall push the number up 15 – 25% but are usually the right call on gate posts.
  • Terrain and soil: sloped yards, rock or hardpan, and old concrete footings slow the dig and add labor.
  • Gates: each gate is a separate fabricated piece with its own hardware; wide double gates cost meaningfully more than a single walk gate.
  • Permit scope: a permit is part of a properly done job, and its fees land inside our written estimate, not on top of it.

A written estimate from us lists linear footage, post spacing, gauge and pipe schedule, gate hardware, permit fees and cleanup as separate line items. What it typically doesn’t include is work that the site visit reveals: removing a buried block wall, relocating a sprinkler main, or repairing a stucco wall the old fence was anchored into. We’d rather you see those as real numbers before we start than discover them mid-job.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Culver City Properties Specifically Do to a Chain Link Job

Culver City‘s older residential blocks are where chain link gets interesting. The 1920s – 40s Spanish bungalows in Carlson Park and Sunkist Park were built on small lots with stucco walls and original wood lath underneath, and a lot of them still have a tired chain link fence from decades ago anchored into that stucco or into a shared block wall. When we pull the old posts out, we sometimes find the wall they were bolted to is what was holding the fence upright and the wall itself is soft at the base from years of ocean moisture creeping in. Corners like that get repaired before anything new goes in.

Permitting here rewards patience. Fence applications in Culver City move through a review that pays attention to property-line accuracy and to design review where a fence sits inside the Carlson Park Historic District, so getting the survey right at the start saves weeks later. Along the Sepulveda and Washington band, the 1950s – 60s ranchos and dingbats more often have simple alley-facing chain link that just needs replacing, and those jobs run faster.

If a chain link fence is part of a larger yard rebuild, homeowners often pair this with Fence Installation in Culver City upgrades, a new gate and approach, or with Concrete Driveways & Concrete Work in Culver City when the fence line and the driveway edge are being rebuilt together. For a broader look at what our Fence Installation service covers, we’re glad to walk you through the options.

Serving Culver City, CA – Our Local Coverage Area

We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Chain Link Fence in Culver City

Get a Free Chain Link Fence Estimate in Culver City

If you’re weighing a chain link fence for a side yard, alley line or full perimeter in Culver City, we’ll come out, measure, and hand you a written line-item estimate with no surprises. Call (888) 427-1733 and a live person answers, day or night. We’ll ask about the line, the gates and the timeline, then schedule your on-site visit. Estimates are free, and calling commits you to nothing.

Written by the team at Groundwork Construction Co..

Why Culver City Chooses Groundwork Construction Co. of Los Angeles

We set the standard for chain link fence in Culver City.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Culver City

Getting your chain link fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your chain link fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chain link fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Culver City Customers Say

Trusted by homeowners across Culver City and surrounding areas.

★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson
★★★★★

"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."

Dev Sharma
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Chain Link Fence in Culver City?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Culver City.

(888) 427-1733

Request a Free Estimate in Culver City

Tell us about your chain link fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch