Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Calabasas: What the Job Involves and What It Costs
A chain link fence on a Calabasas lot usually runs $3,500 – $9,000, depending on linear footage, height, slope, and gate count. A straightforward run on flat, open ground is a one- to two-day job. Hillside and canyon properties take longer, and that’s the norm here. Call (888) 427-1733 and we’ll walk the property with you, measure the actual run, and put a written number in front of you before anything is ordered.
How our chain link fence work actually runs, stage by stage
Every property here sits on a different slope, so the sequence matters more than the pitch. Here’s the real order of operations.
1. Walk-through and layout (day one)
We meet you on the property, walk the fence line, and mark it. On sloped lots we check grade changes first, because a run that looks level from the house often drops three feet by the property corner. You’ll decide the height (4, 5, or 6 feet), the post spacing, and where the gates land. That last one matters more than people expect: a gate placed wrong means a poured concrete driveway apron that shortens the entry, and that’s a rework nobody wants.
2. Property line and setback check (before we dig)
We confirm the line before a single hole is dug. In hillside neighborhoods, a fence planted two feet inside a neighbor’s line becomes a dispute, and on lots with protected trees the setbacks can be wider than the standard building line. If your lot has a survey, we work from it. If not, we ask you to sort out the boundary with your neighbor before the day we set posts.
3. Post holes, concrete, and slope engineering (day one into day two)
Terminal posts get set in concrete and left to cure. On level ground that’s routine. On a canyon lot, we set posts deeper, step the fence in panels down the grade, and add a retaining transition where the ground drops more than a couple of feet between posts. Ground sleeves come in where a run crosses a driveway so you’re not pulling a chunk of concrete to replace a rusted post later.
4. Fabric, rails, and gates (day two)
Top rail, tension bands, and fabric go up after the concrete has set. You choose the gauge and the coating at this point if you haven’t already. Gates hang last, because the gate is the piece that either swings clean or binds. We test every gate through its full range before we call it done.
5. Final walk and clean-up (day two into three)
We walk the line with you, point out how the tension was set, and leave you with the written guarantee. Most Calabasas jobs finish in two days. Big lots, steep grades, or multiple gates push it to three. If your fence is part of a full Fence Installation in Calabasas scope that includes other sections, we sequence the phases so you’re never fenced out of your own yard.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The chain link options you’ll choose between
Chain link is not one product. The specs below are the ones that actually change how the fence looks and how long it lasts.
- Height: 4 feet for property marking, 5 feet as the standard residential middle ground, 6 feet where you want a more definite line. Each additional foot adds material and one post-height change.
- Gauge: 11.5-gauge fabric is the durable residential choice; 12.5-gauge is lighter and cheaper but dents under a thrown ball or a leaning branch. On a lot with kids and dogs, spring for 11.5.
- Coating: Galvanized steel is the budget option and holds up fine on dry inland lots. Vinyl-coated (often in black or green) looks less industrial, blends toward landscaping, and buys you years before the metal shows rust at the cut ends.
- Post type: Round pipe is standard. Line posts at wider spacing cost less but flex more. Terminal and corner posts should always be heavier than the line posts, no exceptions.
- Top rail and tension structure: A full top rail with tension bands keeps the fabric from sagging over time. Cheaper jobs skip the rail and tie the fabric off, and that reads as cheap within a season.
- Gates: Walk gates and double drive gates both come in kit or frame-built versions. On a driveway, a ground sleeve and a proper latch matter more than the gate style.
If you’re pairing this with hardscape, homeowners often add their Concrete Driveways & Concrete Work in Calabasas at the same time, so the drive gate lines up with the apron instead of getting cut in later.
What a chain link fence costs in Calabasas, CA
Expect $3,500 – $9,000 for a residential chain link fence in Calabasas. The number lands at the low end for a simple, level perimeter run and climbs for hillside work, long footage, and multiple gates.
- Linear footage: This is the biggest driver. A small backyard enclosure and a full perimeter are two very different purchases.
- Slope and grade: Stepped panels, deeper post setting, and retaining transitions on canyon lots add labor and excavation.
- Material grade: Gauge and vinyl coating together can swing the material line noticeably over a long run.
- Gate count and size: A double drive gate costs more than two walk gates, mostly in hardware and framing.
- Site access and clearing: Brush clearing, tree trimming, or a tight canyon access point slows the crew and adds time.
Your written estimate should spell out footage, height, gauge, coating, post type, gate locations, and the disposal of old fence if there is one. What it typically won’t include is a survey, arborist review, or concrete flatwork under the gates. We flag those up front so there are no surprises mid-job. It’s the same no-hassle upfront pricing we use on our fence installation projects citywide.
See the difference
Before
After
Before
After
Before
AfterWhat Calabasas homes specifically do to this job
Calabasas sits in the Santa Monica Mountains foothills, and that shapes fencing work here more than anything else. Hillside and canyon lots mean sloped runs, and a sloped run needs different posts, stepped layout, and sometimes a retaining transition. Flat-lot pricing doesn’t apply. The city’s hillside and oak-tree ordinances come into play when a fence line moves near protected coast live oaks; on some properties, even a modest run triggers a setback review before we can dig. Many canyon homes are post-Woolsey Fire rebuilds, and we routinely see fences installed during rebuild that later pull loose on winter-saturated slopes, or galvanized posts showing rust where a slope channeled water against them. In the gated communities around The Oaks and Calabasas Hills, HOA rules on fence color and height can override what you’d otherwise choose. All of this is workable. It just means the walk-through comes first, before anybody orders material.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Chain Link Fence in Calabasas
Most residential chain link fences in Calabasas take two to three working days, from post-setting through final walk. The concrete cure on a slope adds time compared to flat ground. If your lot requires a property line review or an arborist sign-off, that adds calendar days before work starts. Call (888) 427-1733 and we’ll give you a realistic schedule for your specific lot.
Many Calabasas chain link fence installations need a city permit, especially on hillside lots, near protected trees, or above a certain height. The rules aren’t uniform across the city, and HOA approval can layer on top. We check what applies to your property during the walk-through and handle the permitting so you’re not the one chasing paperwork. Our technicians have up to 12 years of experience navigating these requirements.
In most cases, yes. We can route posts around established plantings, work through ground sleeves in concrete rather than cutting it, and step the fence line to follow the grade instead of grading it flat. When a run has to cross a driveway or patio, we discuss the trade-offs with you before digging. Call (888) 427-1733 to schedule a free on-site estimate.
A residential chain link fence in Calabasas typically runs $3,500 – $9,000. The exact price depends on footage, height, slope, coating, and gate count, and your estimate breaks each of those out line by line. Our written quote is fixed – the number on the page is the number you pay. Call (888) 427-1733 for an exact quote; estimates are free.
Every fence we install is covered by our 730-Day Done Right Promise – if something isn’t done right, we make it right. That covers installation workmanship: post alignment, fabric tension, gate swing, and settling. Manufacturer coverage on the steel itself is separate and depends on the product you choose. We put both in writing before the job starts.
Get your Calabasas chain link fence estimate
If you’re ready to price a chain link fence in Calabasas, start with a free on-site estimate. Call (888) 427-1733 and a live person answers right away – we’ll ask a few questions about your property, schedule a walk-through, and hand you a written line-item quote with no change orders and no hidden fees. We cover Calabasas and the surrounding canyons, and we pair this work with asphalt resurfacing through our Asphalt Driveways & Resurfacing in Calabasas service when a full driveway refresh is on the table.
Written by the team at Groundwork Construction Co.