Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Santa Monica, CA: What It Costs and How Long It Takes
Concrete driveways and concrete work in Santa Monica, CA typically run $4,500 – $12,000 for a new pour and $5,000 – $14,000 for a full replacement, with most residential jobs finished in 3 to 5 working days once permits clear. The concrete itself cures in 24 to 48 hours, but you shouldn’t park on it for about a week. Call (888) 427-1733 for a free on-site estimate with line-item pricing before anything gets demoed.
How we run a concrete driveway job, stage by stage
Concrete work is unforgiving of shortcuts. What’s under the slab matters as much as the slab itself, and in Santa Monica the prep is where older properties throw surprises. Here’s the sequence we follow on a typical driveway, from first walk-through to final walkthrough.
Stage 1: Site walk and layout (day 1, about 90 minutes)
We measure the existing pour, check slope and drainage direction, and look at what’s underneath – old footings, tree roots, utility lines, or a prior layer of asphalt someone poured over. You decide the driveway width and whether you want expansion joints to line up with a walkway or garage door. For 1920s bungalows south of Wilshire, the existing slab is often cracked into sections that need full removal rather than an overlay.
Stage 2: Demolition and haul-off (days 1 – 2)
A standard two-car driveway takes a crew most of a day to break out and load. Concrete debris is heavy – a 20-by-20 slab generates several tons – so haul-off and dump fees are real line items, not padding. If a root system is pushing up the old slab, we cut and remove the offending section so it doesn’t crack the new pour within a season.
Stage 3: Base prep and grading (day 2 – 3)
This is the stage that separates a driveway that lasts 30 years from one that cracks in three. We excavate to depth, compact a crushed aggregate base, and set the slope so water runs toward the street or a drainage channel rather than your garage. For Santa Monica’s marine-layer climate, we pay particular attention to how water sheets off the slab, since standing moisture accelerates surface spalling. You’ll want to decide here whether you’re adding a drain channel or keeping the grade simple.
Stage 4: Forming, reinforcement, and pour (day 3 – 4)
Forms go in, then rebar or welded wire mesh – we recommend rebar for any driveway that will see regular vehicle weight on clay-heavy soil. The pour itself takes a few hours. Control joints get cut or tooled at planned intervals so the concrete cracks where we want it to, not where it feels like it. If you’ve chosen a broom finish, that texture gets applied while the surface is still wet. Exposed aggregate and stamped finishes cost more and take extra labor on pour day.
Stage 5: Cure, seal, and final check (days 5 – 7)
We keep foot traffic off for 24 hours and vehicles off for about seven days, longer in cool, damp June Gloom weather. A curing compound goes on right after finishing; a penetrating sealer usually waits 28 days so the slab can breathe. At the final walkthrough we check slope, joint spacing, and finish consistency with you before we consider the job closed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The concrete options you’ll actually choose between
Concrete isn’t one product. The choices below move both the price and how the driveway looks and holds up in a coastal climate.
- Standard broom-finish concrete: the workhorse. Slip-resistant, easy to maintain, and the most economical. It shows tire marks and oil stains more than textured finishes.
- Exposed aggregate: the top layer of cement is washed away to reveal the stone underneath. Grippy and hides dirt well, but the rougher surface is harder to shovel and sweep. Runs toward the higher end of the concrete range.
- Stamped or scored patterns: a decorative texture pressed into the surface. Attractive for curb appeal, but it’s a separate finish upgrade and needs resealing every few years to hold up under salt air.
- Reinforcement choice – mesh vs. rebar: mesh is cheaper; rebar handles heavier loads and movement better. On Santa Monica’s older lots with settled soil, we lean toward rebar.
- Fiber-reinforced mix vs. standard: synthetic fibers reduce hairline cracking and are worth the small upcharge on a climate that swings between damp mornings and dry summers.
For small patch jobs and repairs, a bagged mix like Sakrete works fine, but a full driveway pour is a readymix delivery with a specified PSI rating – we’ll tell you which rating suits your traffic and soil.
What Concrete Driveways & Concrete Work costs in Santa Monica, CA
Plan on $4,500 – $12,000 for a new concrete driveway installation and $5,000 – $14,000 for a replacement where the old slab has to come out. Concrete driveway installation sits at that lower band on straightforward jobs; replacement climbs toward the top once demolition, haul-off, and base repair enter the picture.
Five variables push a job from the low end to the high end:
- Size and thickness: a single-car apron is a fraction of a full two-car drive. Thicker slabs (5 – 6 inches for heavier vehicles) use more concrete.
- Existing condition: a clean removal is cheap. Roots, buried footings, or a failed base add demo and haul-off time.
- Base and grading work: drainage corrections, new drain channels, or significant re-grading for slope all add labor.
- Finish grade: broom finish is the baseline; exposed aggregate and stamped finishes cost more in both material and pour-day labor.
- Permit and inspection scope: a driveway that changes the curb cut or affects drainage may trigger city review, which adds time and fees.
A written estimate should spell out demolition, haul-off, base depth, reinforcement type, PSI rating, joint layout, finish, and curing – that’s what you’re paying for. What’s often left out of a cheap quote: dump fees, base repair, and sealing. Ask about each before you sign. Upfront pricing means the number you see is the number you pay – no change orders mid-pour.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Monica homes specifically do to this job
Most of the concrete we tear out in Santa Monica is original to mid-century low-rise stucco houses – 1920s to ’40s Spanish and Craftsman bungalows in Ocean Park and south of Wilshire, plus 1960s and ’70s wood-frame apartment buildings along Lincoln and Pico. That means we’re usually dealing with settled soil, tree-root intrusion, and slabs poured without modern reinforcement, not greenfield pours. Marine air and salt off Santa Monica Bay also attack fasteners and exterior steel faster than inland, and the June Gloom/dry-summer cycle keeps the ground moving under older slabs, which is why so many driveways here crack at the corners within a few years. If you’re in 90401 or 90402 and your project sits within the coastal overlay, Coastal Act review can add weeks to the permit timeline before the first form goes down – we factor that into scheduling up front. Driveways on the 90402 flats or near Montana often pair with a rebuild that touches the whole front approach, which is where our Driveway & Pavers in Santa Monica work overlaps.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Santa Monica
A typical residential driveway takes 3 to 5 working days from demo to final finish, then about seven days before you drive on it. Permit review near the coastal overlay can add time before work starts, so the calendar depends on your address. Call (888) 427-1733 and we’ll walk your specific site and give you a realistic schedule.
Often yes – especially if the pour changes the curb cut, alters drainage, or sits in the coastal overlay. Interior flatwork like a walkway may not require one, but driveways touching the street usually do. We handle the permit and inspection process as part of the job; call us for a free estimate and we’ll tell you what your project triggers.
Usually, yes – concrete sits on the surface base, so buried plumbing and foundation don’t get touched unless the grade needs to change. If drainage corrections require re-grading over a utility line, we flag it before we pour. Call (888) 427-1733 and we’ll assess your site in person.
New concrete driveway installation runs $4,500 – $12,000, and a full replacement runs $5,000 – $14,000, with the higher end driven by demo, base repair, and finish upgrades. Call (888) 427-1733 for an exact quote – estimates are free.
Every concrete driveway and concrete work project we do is backed by our 730-Day Done Right Promise – if it isn’t done right, we make it right. If you’re planning a broader build and pairing this with a Garage Conversion ADU in Santa Monica or a New Detached ADU in Santa Monica, the same guarantee covers the whole scope. For the full range of hardscape work, see our Driveway & Pavers service, and for the wider area we cover, visit our Santa Monica page.
Get a free on-site estimate for concrete driveways & concrete work
Call (888) 427-1733 to schedule a free on-site estimate for concrete driveways & concrete work in Santa Monica. A live person answers around the clock – no voicemail, no waiting until Monday. We’ll walk the driveway, measure, check the base and drainage, and hand you a written, line-item quote with no surprises. If your project qualifies, $1,000 off over $10,000 and 0% financing for 18 months are available.
Written by the team at Groundwork Construction Co..