Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Los Angeles Homeowners
If your fence is leaning after a Santa Ana wind event, half-buried under jasmine, or leaving a gap a dog can slip through, you need a crew that handles Los Angeles fence installation without cutting corners on posts, footings, or permits. Groundwork Construction Co. of Los Angeles installs wood, vinyl, aluminum, chain link, and iron fencing across the city, and our technicians bring up to 12 years of hands-on experience to every property. We know the difference between a fence that survives a dry summer in the San Fernando Valley and one that rusts out in six months near the coast. Every project comes with our 730-Day Done Right Promise and upfront pricing, so the number you see is the number you pay. Call (888) 427-1733 to schedule your free estimate.

What Our Fence Installation Service Includes
Fence work in Los Angeles is rarely one-size-fits-all. A hillside lot in Topanga needs different footings than a flat corner in San Fernando, and a commercial lot in El Segundo has different requirements than a backyard in Palos Verdes Estates. Here is what we install and what each option actually means for your property.
Wood Fence
Wood fencing remains the most common request we get in Los Angeles, and for good reason: it’s versatile, repairable, and looks right on everything from craftsman bungalows to mid-century ranches. We install cedar, redwood, and pressure-treated pine with proper post depth and concrete footings set below the frost line (not an issue here, but settlement from our clay-heavy soils absolutely is). If you’re in an older neighborhood like Hancock Park or West Adams, we match the existing board style and height so the new run blends with what’s already there.
Chain Link Fence
Chain link is the workhorse option for property lines, dog runs, and commercial lots where security matters more than curb appeal. We install galvanized and vinyl-coated chain link with tension wire and proper terminal posts, which is where cheap installs fail first. If you manage a rental property or a commercial yard in Los Angeles, chain link gets you a durable perimeter at a fraction of the cost of ornamental metal.
Vinyl Fence
Vinyl fencing handles Los Angeles sun and marine air better than wood, and it never needs staining or sealing. We install PVC vinyl in privacy styles, picket styles, and ranch rail, with reinforced bottom rails and aluminum inserts where the span calls for extra rigidity. Homeowners near the coast in Santa Monica and Marina del Rey tend to choose vinyl over wood for exactly this reason: salt air eats untreated lumber, and vinyl doesn’t care.
Aluminum Fence
Aluminum fencing gives you the look of wrought iron at roughly half the weight, and it won’t rust the way steel does. We install powder-coated aluminum in ornamental, pool-code, and flat-top styles, with racked panels for sloped yards, which matters on the hillside properties we see throughout the Santa Monica Mountains and Calabasas. If your HOA requires a specific style and height, we work from their spec sheet so you get approved the first time.
Iron Fence
Wrought iron fencing is the premium choice for street-facing front yards, gates, and properties where security and appearance both matter. We install iron fencing with welded or assembled panels, set in concrete footings, and finished with rust-inhibiting primer and paint. On older Los Angeles properties with existing ironwork, we can match picket spacing and finial styles so new sections look like they’ve always been there.
Fence Repair
Not every fence needs replacing. We repair leaning posts, rotted bottom rails, broken pickets, sagging gates, and storm damage, and we tell you honestly when a repair makes sense versus when a full replacement will cost less over the next five years. A common repair call in Los Angeles comes after Santa Ana winds knock panels loose or topple posts that were set too shallow to begin with. We reset posts properly with concrete and fix the underlying problem, not just the visible symptom.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Fence Installation in Los Angeles: Materials We Work With
Our fence installations use materials from manufacturers we’ve tested on real Los Angeles jobs, and those materials hold up under conditions that punish lesser products. Whether you’re installing fencing alongside a home renovation or as a standalone project, the material choice drives how long the fence lasts.
We work with composite and vinyl systems built to resist UV fading and coastal moisture, aluminum products with powder-coat finishes that hold color through years of direct sun, and treated lumber sourced for structural integrity rather than price alone. We don’t warehouse fence materials or stock parts; we source what the job actually needs and install it to manufacturer specification. That approach, paired with our 730-Day Done Right Promise, means the fence you get is built to last and backed in writing. Whether your project calls for a specific brand system or a standard installation, we’ll recommend the right material for your lot and your budget.
Signs You Need Fence Installation Right Now
Fences fail gradually and then suddenly. Here’s what to watch for before a small repair turns into a full replacement at the worst possible time.
- Posts are leaning or wobbling. A post that shifts when you push on it means the footing has failed or was never set deep enough. Left alone, one leaning post pulls the whole panel with it and eventually the next post down the line.
- You can see daylight through the fence line. Gaps between panels or at the bottom of the fence mean the structure has settled or separated. Beyond privacy, that gap is how pets get out and how strangers get a clear view into your yard.
- Rust, rot, or termite damage is visible. Los Angeles has active subterranean termite pressure, and wood fencing is a target. Soft spots at the base of posts and rails mean the structural core is already compromised, and patching cosmetic damage won’t fix it.
- The gate won’t close or drags on the ground. A sagging gate is the first sign your posts have moved or your hinges have pulled loose from soft wood. Fixing it early is cheap; waiting until the gate frame fails is not.
- The fence doesn’t meet current code or HOA rules. Pool fencing in California has specific height and self-latching requirements, and many Los Angeles HOAs restrict height and material. An out-of-compliance fence can block a home sale or create liability.
Our Fence Installation Process – Step by Step
We’ve refined this process over thousands of linear feet of fencing across Los Angeles, and every step exists because skipping it caused a problem somewhere down the line.

- 1
Free on-site estimate and property line review. We walk the property, confirm the fence line against your plat or survey, discuss material options, and give you a written line-item quote. If a permit or HOA approval is required, we tell you upfront.
- 2
Utility locate and site preparation. Before any digging, we call for utility marking so we don’t hit a gas, water, or irrigation line. We then clear the fence line, remove old fencing if applicable, and confirm post spacing and gate locations with you.
- 3
Post setting with proper footings. We dig each post hole to depth, set the post plumb, and pour concrete footings. This is the step that separates a fence that lasts 15 years from one that leans in two. We check plumb with a level at every post and string-line the full run.
- 4
Panel, rail, and gate installation. Frames go up square and level, panels are fastened to manufacturer spec, and gates are hung with hardware rated for the fence material. We test every gate for swing and latch before moving on.
- 5
Final walkthrough and cleanup. We walk the finished fence with you, confirm gates close properly, haul away all debris, and leave you with the written documentation behind your 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Los Angeles?
Fence installation in Los Angeles typically costs $4,130 – $10,620 for a standard residential job, with the final number driven by material choice, linear footage, and site conditions. A typical wood privacy fence runs toward the lower end of that range, while ornamental iron or a complex gate system pushes toward the top.
| Fence Type | Typical LA Cost Range |
|---|---|
| Vinyl Fence Installation | $4,130 – $10,620 |
| Aluminum Fence Installation | $4,720 – $11,800 |
| Wood Fence Installation | $4,130 – $10,620 |
| Chain Link Fence | Lower end of the range |
What moves the price: total linear footage, material grade, gate count, and site access. Sloped or rocky lots in the hills take more labor than flat ground, and old fence removal adds cost. How to avoid overpaying: get a written line-item quote that separates materials from labor, confirm what’s included in removal and disposal, and never accept a verbal estimate. Our free estimate includes a full written breakdown with no-hassle upfront pricing, so you know exactly what you’re paying before work starts. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
Fence Installation Near Los Angeles – Our Service Area
We install fencing throughout Los Angeles and the surrounding communities, including Fence Installation in Santa Monica, Fence Installation in Marina del Rey, El Segundo, Manhattan Beach, Calabasas, and Palos Verdes Estates. Coastal jobs get scheduled with marine-grade hardware and vinyl or aluminum materials suited to salt air, while Valley and hillside projects are planned around slope and soil conditions. Reach out and we’ll confirm scheduling for your address.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Los Angeles
Fence installation is the process of setting posts in concrete footings, building the frame and panels, and hanging gates along a defined property line. In Los Angeles, it also involves confirming the property line, checking permit and HOA requirements, and calling for utility locates before any digging. We handle all of it from first measurement to final walkthrough.
Most residential fence installation in Los Angeles takes one to three days depending on linear footage and material. A standard backyard wood privacy fence often finishes in a single day, while larger runs with multiple gates or ornamental iron take longer. We give you a firm timeline in the written estimate before work begins.
Most fence installation in Los Angeles runs $4,130 – $10,620 depending on material, length, and site conditions. Wood and chain link trend toward the lower end, while aluminum and iron trend higher. Call (888) 427-1733 for an exact quote, since estimates are free.
Yes. We work with the major fence material systems and can recommend the right product for your lot, whether you’re facing coastal moisture, hillside slope, or termite pressure. We don’t stock inventory or act as a dealer, but we source and install to manufacturer spec and warranty your workmanship for 730 days.
We handle urgent fence repairs, including storm damage, downed sections, and failed gates, and our phones are answered by a live person 24/7. Los Angeles weather brings Santa Ana winds and occasional heavy rain that take fences down fast. Call (888) 427-1733 and we’ll get you on the schedule.
Every fence installation is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to post setting, framing, gate hardware, and finishes. It’s in writing, not fine print.
Clear the fence line of furniture, plants, and stored items, unlock gates, and make sure we can access both sides of the property. Let us know about irrigation lines, sprinkler heads, or buried wiring so we can locate them first. We’ll handle the utility marking and site prep once you’ve done those three things.
Schedule Your Fence Installation Service in Los Angeles Today
Whether you need a privacy fence for a backyard in San Fernando or a commercial perimeter in El Segundo, Groundwork Construction Co. of Los Angeles gets it installed right the first time. Our technicians bring up to 12 years of experience, our phones are answered by a live person 24/7, and every project is backed by our 730-Day Done Right Promise. Call (888) 427-1733 for a free, no-obligation estimate.
Written by the team at Groundwork Construction Co..