Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Los Angeles soils shift, our clay-heavy ground swells after winter rain and settles hard in the dry months, and a driveway is where that movement shows up first. Paver driveways in Los Angeles run $8,260 to $21,240 installed, with most single-car approaches landing near the middle. Call (888) 427-1733 for a free on-site estimate before you commit to a number from a website.
What a paver driveway actually involves in Los Angeles
A paver driveway is a base problem before it’s a surface problem. We excavate 8 to 12 inches of existing concrete or soil, compact a crushed aggregate base in lifts, set the pavers on a sand or aggregate bedding layer, vibrate them into place, and lock the field with edge restraints and joint sand. On a typical Los Angeles driveway that’s three to five working days from demo to final sweep, and the base work eats two of those days. Skip the base and the pavers move within one rainy season.
Day by day: how we build this job
Homeowners ask us what actually happens between signing and driving on it. Here’s the honest sequence, with the decisions landing where they actually fall.
Stage 1: Site walk and layout (about an hour, before any work)
We measure the drive, check slope away from the garage, and look at where water currently pools. This is where you confirm the paver unit, the pattern, and whether the driveway meets the sidewalk flush or gets a small apron. If the existing slab is heaved or cracked, we scope the removal here so there’s no surprise line item later.
Stage 2: Demo and haul-off (day 1)
Concrete comes out with a breaker and skid-steer, and we haul it off the same day unless you want it staged for a later pour elsewhere. Roots that have crept under the old slab get cut back at this point. We mark utility locates before anyone touches the ground, which usually happens 48 hours ahead of demo day.
Stage 3: Base and compaction (days 2 and 3)
Crushed aggregate goes down in 3-inch lifts and gets compacted with a plate compactor until it won’t take another pass. We check grade against a string line and a laser level, because a Los Angeles drive that slopes the wrong way sends water into the garage or under the front door. Drainage slope is roughly 1 inch of fall per 4 feet, and homeowner decisions here are drainage routing and where water exits the property.
Stage 4: Setting pavers and cutting edge (days 4 and 5)
Bedding sand on top of the compacted base, then the field goes down following your chosen pattern. Edge restraints get set in a concrete toe where the drive meets the street or a planter. Perimeter cuts happen on the wet saw, and this is the stage people peek at and notice the pattern is the thing they’ll look at every day.
Stage 5: Joint sand, compaction, and cleanup (final morning)
Polymeric joint sand goes in, gets swept into the joints, then we run the plate compactor across the field so the pavers seat into the bedding. We hose the surface off, backfill disturbed planting, and walk you through the finished job. Total time on most Los Angeles paver driveways: five working days, with the last one being short.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Most of the decision-making happens in a single conversation. Here’s what genuinely moves the outcome.
- Concrete pavers (Sakrete bedding and joint products are ones we work with regularly): the standard choice, 60mm to 80mm thick for vehicle traffic. They hold color best, resist the tire-mark fading that plagues cheaper surfaces, and can be pulled and reset if a utility needs digging later. Who it suits: nearly everyone.
- Clay brick pavers: richer color depth and a warmer look on Spanish Colonial and Craftsman homes, but they cost more per square foot and crack more easily on heavy loads. Best on a low-traffic drive where looks matter more than durability.
- Permeable pavers with open-grain joints: worth considering on sloped hillside drives where you want runoff to infiltrate rather than sheet toward the garage. Higher material cost, but it cuts surface ponding dramatically.
- Running bond vs. herringbone pattern: running bond is faster, cheaper, and reads clean on a straight drive. Herringbone locks the field together better under turning wheels and is worth the upcharge on a narrow driveway where cars turn hard.
- Color through-body vs. surface-coated: through-body pavers carry the color all the way down, so a chipped corner barely shows. Surface-coated pavers drop in price but fade and show chips within a few seasons.
What Paver Driveways costs in Los Angeles, CA
The range runs $8,260 to $21,240 for installed paver driveways in Los Angeles. Here’s what pushes a job toward either end.
| Line item | Typical LA range |
|---|---|
| Standard concrete paver install, single-car drive | $8,260 – $13,500 |
| Premium paver or herringbone, larger drive | $13,500 – $21,240 |
| Driveway sealing (where called for) | $295 – $825 |
| Driveway replacement (full demo + rebuild) | $5,900 – $16,520 |
Four things move the number: size (a two-car apron costs roughly 40% more than a single), current condition (a cracked slab means demo and haul-off, a clean gravel surface saves that cost), slope and drainage (steep hillside drives need extra base and drainage lines), and paver grade (through-body clay runs meaningfully above basic concrete pavers). A written estimate lists demo, base depth, paver unit, edge restraints, joint sand, and cleanup as separate line items. What it doesn’t cover: sprinkler rerouting, driveway gate re-hanging, or hand-cut decorative borders, all of which we price only when the scope calls for it.
See the difference
Before
After
Before
After
Before
AfterHow Los Angeles conditions shape this job
Los Angeles is a fault-adjacent basin with hillside grading rules that change how a driveway gets engineered. On flat lots in neighborhoods like Reseda or Mid-City, the drive is straightforward base-and-pavers work. On hillside properties above the Hollywood Hills or in the Santa Monica Mountains, the drive may sit on a slope where fire code and seismic standards both come into play: fire-resistant edging near structures, and slope drainage that channels runoff rather than letting it undercut the base. The winter rain cycle is the other half of the story: a hard storm on a saturated slope can shift a driveway that had no drainage plan. When we work near Dingbat-era buildings in Koreatown or Los Feliz, we often see driveways that tie into soft-story parking areas under the building, and we’re careful not to disturb the retrofit hardware that city ordinance requires. We also work with Sacrete and Belgard on paver and base products, and if your project is part of a full Driveway & Pavers in Los Angeles plan, we’ll scope it alongside the rest.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Paver Driveways in Los Angeles
Most Los Angeles paver driveways take three to five working days from demo to final compaction, with a single-car drive usually landing on the shorter end. Two of those days are base work, which you can’t shortcut without the pavers shifting within a season. Call (888) 427-1733 and we’ll give you a firm start and finish date, not a window.
Usually not for a driveway that replaces an existing one at the same dimensions, but a widened apron, a new curb cut, or a hillside drive that requires grading often does. Because Los Angeles grading and drainage rules vary by hillside designation, we check before demo starts and handle the permit filing if one is required. That check happens on the site visit, and the estimate reflects it.
No. We price a paver driveway after a site walk and put every line item in writing, and the number you approve is the number you pay. The only changes come from work you request after the fact, like adding a decorative border or rerouting a sprinkler line, and those get priced before we touch a saw.
In most cases yes. Adding paver driveways over or alongside an existing drive rarely disturbs plumbing, and we avoid structural elements unless the base requires deeper excavation. If a sprinkler main or a gas line runs through the drive footprint, we flag it on the estimate so the fix is priced up front, not discovered mid-demo. Call (888) 427-1733 to schedule that walk-through.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship for two full years, and we back it in writing. If a paver settles or a joint fails within that window, we come back. Our technicians have up to 12 years of experience on driveway and hardscape work. If your driveway project overlaps with an accessory structure, homeowners often pair this with ADU Design & Permitting in Los Angeles. If you’re reworking a garage into living space, we also handle a Garage Conversion ADU in Los Angeles. And if you’re tackling the broader hardscape, our Driveway & Pavers service covers patios, walkways, and pool decks alongside the drive. We serve Los Angeles and the neighborhoods around it from Culver City to El Segundo.
Get a free on-site estimate
We’ll walk the drive with you, check slope and drainage, and hand you a written estimate with every line item spelled out. No pressure, no vague ranges. Calls are answered by a live person around the clock, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000. Call (888) 427-1733 to book your paver driveways estimate.
Written by the team at Groundwork Construction Co.