Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Marina del Rey, CA: What the Job Actually Involves
Sliding & patio doors in Marina del Rey typically run $3,800 to $12,500 for a full replacement, including door unit, framing work, coastal-grade hardware and haul-away. A single slider swap is usually a one-day job. A multi-panel system opening onto a balcony or a dock-adjacent patio takes two to four days, and the deciding factors are panel count, the condition of the existing opening, and whether the building envelope behind it needs repair. Call (888) 427-1733 and we’ll put a real number on your specific opening.
How We Take a Sliding & Patio Door From Measure to Final Adjustment
Every marina door is a different animal, but the shape of the work is consistent. Here’s the sequence we run, and the decisions that land on you at each stage.
Stage 1: Measure and site walk (day 1, about 60 to 90 minutes)
We measure the rough opening, check for level and plumb, and look hard at what’s behind the wall: header condition, any water staining at the sill, and how the existing door is flashed. On 1960s-70s mid-rise units around Admiralty Way, we frequently find the original aluminum slider sitting in a shallow sill that has been collecting marine moisture for decades. You decide the door style and glass package after this visit, not before. We don’t quote until we’ve seen the rough opening.
Stage 2: Order and lead time (what you’re waiting on)
Standard sizes move faster than custom. A stocked slider in a common size can arrive in a couple of weeks; a custom multi-panel or a large glass package built to your exact opening runs four to eight weeks. You’ll decide between speed and fit here. The manufacturer supplies a cut sheet, and we confirm it matches the field measurement line by line before anything is fabricated.
Stage 3: Demo and opening prep (day of install, two to four hours)
We protect floors and adjacent finishes, pull the old door and frame, and inspect the rough opening once it’s exposed. This is where we find out whether the framing is sound or whether salt air and old caulk have done damage at the corners. Scrap wood, damaged sheathing or a soft sill gets addressed before the new unit goes in. You don’t need to be home for this, but we’ll send photos if anything unexpected turns up.
Stage 4: Set, shim, flash and seal
The new door goes in plumb and square, shimmed at the hinges and lock points, with the flashing and sealant done to shed the west- and south-driven rain this coastline throws in winter. Hardware gets mounted and the track is set so the panel glides without dragging. This is the stage that decides whether the door feels cheap or solid for the next fifteen years.
Stage 5: Adjust, test and walkthrough
We cycle the door dozens of times, adjust rollers and latches, confirm the lock engages cleanly, and check that water drains away from the sill rather than pooling against it. Then we walk you through the operation and care. Most standard replacements finish same day; larger systems carry over to a second day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’re Actually Choosing Between
The door itself is maybe a third of the decision. Here’s what moves the price and the feel of the finished job.
- Aluminum vs. vinyl vs. fiberglass frames: Aluminum is slim and modern, matches the glass-and-steel look common in newer towers, and holds up well here if it’s finished for salt exposure. Vinyl is the value pick and insulates well, but it can get brittle with years of UV. Fiberglass costs more and bridges the gap.
- Glass package: Standard dual-pane, low-E, or laminated impact-rated glass. On west-facing doors with afternoon sun and wind-driven rain, low-E pays for itself. Impact-rated glass adds cost but is worth discussing if the unit sits high and exposed.
- Panel count and track: A two-panel bypass is the workhorse. Three- and four-panel systems open a wider span but need a stiffer header and better track. Heavy panels need upgraded rollers or they’ll drag within a few years.
- Hardware and security: Standard latch, multi-point lock, or a rolling-code remote on any motorized opener. On a marina balcony or ground-floor patio, security hardware is not optional in practice. We’ll walk through what makes sense for your exposure.
- Screen and threshold: Retractable screens, sliding insect screens, and low-profile thresholds make the door feel finished. A flush threshold matters if anyone in the household uses a walker or wheelchair.
We favor Andersen and Marvin door lines for the balance of coastal durability and finish options, and we’re happy to spec a builder-grade alternative if the budget is tight. If the door is part of a broader envelope project, it’s worth reading our Windows & Doors in Marina del Rey page alongside this one, since the flashing and trim decisions overlap.
What Sliding & Patio Doors Cost in Marina del Rey, CA
For a straight replacement of a standard two-panel slider, expect $3,800 to $6,500 installed. A larger multi-panel system or a door opening onto a balcony or patio with structural or flashing work runs $7,000 to $12,500. Those are real installed numbers for this market, not door-only prices.
Five variables push a job toward the high end:
- Size and panel count. Every additional panel adds glass, track and hardware.
- Existing condition. Rotted framing, a soft sill or a header that needs sistering adds labor and material.
- Structural changes. Widening the opening means a new header and often a permit. Relocating nothing else keeps it simpler.
- Material grade. Fiberglass or a premium aluminum system with laminated glass can double the door cost over builder-grade vinyl.
- Permit scope. A like-for-like replacement is usually permit-light; a changed opening or a new structural header is not.
A written estimate should list the door model and glass package, the track and hardware, the flashing and sealant, haul-away, and any framing repair allowance. What it typically doesn’t include: finish painting, interior trim repair beyond the immediate opening, or the cost of any HOA submittal. Ask for the allowance line so there are no surprises mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Marina del Rey Homes Specifically Do to This Job
This is a coastal, dense housing market, and the door reflects it. Most of our marina work is on 1960s-80s mid-rise condos and apartments, newer high-rise and townhome infill, and the occasional surviving beach-era bungalow. On the older stock, the original sliders have been fighting salt fog for decades. Fasteners on a 1970s Admiralty Way balcony unit are often rust-stained by the time we open the frame, because salt air rolls off the water nightly and the marine layer keeps condensation sitting on cold metal. The fix is stainless or coated hardware, not the standard galvanized screws a handyman would reach for.
Dense multifamily means tight clearances, alley loading and HOA approval for anything that changes the elevation. We handle the submittal paperwork, but the timeline is real – a condo association can take two to four weeks to sign off. Waterfront-adjacent units also need the flashing and sealant done to shed west and south wind-driven rain, because the occasional atmospheric river is more than this dry climate suggests. Newer infill like covered or modular builds around the marina’s contemporary towers often come with factory-spec door packages, and we’re familiar with how those are installed.
Serving Marina del Rey, CA – Our Local Coverage Area
We serve Marina del Rey and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Sliding & Patio Doors in Marina del Rey
A standard two-panel slider is usually a single-day job once the door is on site. Larger multi-panel systems or doors that need framing repair take two to four days. Add the order lead time – about two weeks for a stocked size, four to eight for a custom unit.
A like-for-like replacement in the same opening usually does not require a permit. Widening the opening, adding a new header or changing the structural span does. We pull the permits when they’re required and handle the inspection. Call (888) 427-1733 and we’ll confirm your specific case before quoting.
Most replacements fall between $3,800 and $12,500 installed, depending on size, glass, hardware and any framing or flashing repair. Call (888) 427-1733 for an exact quote – estimates are free.
Yes, in most cases. A straight replacement stays within the existing opening and leaves the wall, plumbing and header untouched. Only a size change or a widening of the opening brings in structural work.
Our workmanship is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. The door itself carries the manufacturer’s warranty, and we register it for you.
Homeowners here often pair this work with Fence Repair in Marina del Rey when the patio or balcony boundary needs attention at the same time, and our Paver Driveways in Marina del Rey team handles the exterior approach and hardscape that ties into a new patio door. If you’re upgrading the whole envelope, the wider Windows & Doors scope is the place to start. We cover the full Marina del Rey area including these coordinated jobs.
Get a Free Estimate for Sliding & Patio Doors in Marina del Rey
Call (888) 427-1733 to schedule a free, no-pressure on-site estimate for your sliding or patio door. We’ll measure the opening, walk you through the options, and put a written line-item quote in your hands. The number you see is the number you pay, with the 730-Day Done Right Promise behind the work. Calls are answered by a live person 24/7, and we’re happy to talk through HOA timelines on the first call.
Written by the team at Groundwork Construction Co.