Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Los Angeles: What the Job Actually Involves and What It Costs
Replacing a vanity, re-tiling a bathroom floor or shower surround, and swapping fixtures in a Los Angeles bathroom is finish carpentry plus waterproofing plus plumbing trim, and it runs $10,620 to $33,040 for a full bathroom scope, with a vanity-only job landing between $945 and $3,540. Most of these projects take five to twelve working days on site. Call (888) 427-1733 to schedule a free estimate and we’ll price your exact room with a written, line-item quote.
Key takeaways
- Vanity, tile and fixture work is the part of a bathroom project people see and touch every day – it’s where the money shows.
- Tile and waterproofing decisions drive both the price and how long the room lasts.
- Los Angeles bathrooms in 1920s-40s bungalows and 1960s dingbats each bring their own surprises behind the wall.
- Upfront pricing, no surprises – the number we write down is the number you pay.
Our process for vanities, tile and fixtures, stage by stage
We handle this as a sequence, not a scramble. Here’s what actually happens, in order, and what you’ll be deciding at each step.
Stage 1: On-site measure and tear-out assessment (day 1)
We measure the room, check plumb and level on the walls, and look at what’s under the existing floor – sometimes a 1940s Los Angeles bathroom has a mud bed under the tile that’s two inches thick and has to come out with a chipping hammer. You’ll decide the vanity footprint and whether the sink stays on the same wall. If anything’s soft (rotted subfloor, crumbling backer), we show it to you before it changes the price.
Stage 2: Demo and rough-in (days 2 – 3)
We pull the old vanity, tile, and fixtures, protect the rest of the house with plastic and rosin paper, and expose the framing. If you’re relocating the sink drain, adding a second vanity, or moving a shower valve, this is when the rough plumbing and electrical happen. This stage is where an inspection may need to happen if we’ve moved anything inside the wall – we’ll tell you upfront whether your project triggers one. You’ll sign off on the rough-in before anything gets closed up.
Stage 3: Substrate and waterproofing (days 3 – 5)
This is the boring part that decides whether your tile is still tight ten years from now. We install cement backer board or a bonded waterproofing membrane in wet areas, tape and mortar the seams, and set the shower pan or tub flange correctly. In Los Angeles bathrooms that sit over a crawl space or on a slab, we also check the threshold and door swing at this point. You choose the tile layout here – running bond, herringbone, stacked – because layout dictates where the cuts land.
Stage 4: Tile setting, grout and vanity install (days 5 – 10)
Floor tile goes down first, then wall tile, then grout. The vanity cabinet gets set, leveled, and secured to the wall studs (important in a seismic zone like Los Angeles – we never rely on drywall anchors for a loaded vanity). The countertop is templated after the cabinet is in place, then installed. You’ll want to have your faucet and sink on site by day 1 so we’re not waiting on a delivery when the counter is ready.
Stage 5: Fixtures, trim, and final walkthrough (final 1 – 2 days)
We set the faucet, drain, toilet, mirrors, towel bars, and whatever else you’ve selected, then run water and check for leaks at every connection. The last step is a walkthrough with you – we look at every grout line, every cut edge, the door swing, and the caulk joints, and we don’t sign off until you do. That work is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually be making
Here’s the real menu. Each option has a trade-off in cost, upkeep, or longevity – not just looks.
- Vanity cabinet: Stock (big-box, $300 – $900), semi-custom ($900 – $2,200), or custom-built ($2,200 – $4,500+). Stock is fine for a hall bath. Custom makes sense when the room is oddly shaped or you want the sink centered under a window in a 1930s bungalow.
- Vanity top: Quartz is the low-maintenance standard now, cultured marble is the budget option, and natural stone (marble, granite) is beautiful but needs sealing. We work with Cambria quartz and Kohler sinks often; both hold up in daily use.
- Floor tile: Porcelain is the workhorse – durable, water-resistant, cheap to mid-priced. Natural stone (travertine, slate) is gorgeous but porous and needs sealing. Luxury vinyl plank is the budget choice, but it doesn’t belong in a wet area long-term.
- Wall tile & shower surround: Large-format porcelain (12×24 or bigger) means fewer grout lines and less scrubbing. Smaller subway tile gives a classic look but more grout. Glass mosaic is expensive and shows water spots.
- Grout: Cementitious grout is cheap but needs sealing. Epoxy grout costs more upfront but resists staining and never needs sealing – a solid choice for a busy household.
- Fixtures: Big-box brass and plastic budget fixtures ($60 – $150 for a faucet) work but show wear in 5-7 years. Mid-grade Kohler or Delta ($150 – $400) is the sweet spot. Designer brands run $400 and up.
What vanities, tile and fixtures cost in Los Angeles, CA
A full bathroom refresh – vanity, tile floor, tile shower surround, and all fixtures – runs $10,620 to $33,040 in Los Angeles. A vanity-only installation runs $945 to $3,540. Here’s what moves a job to the low or high end:
| Line item | Typical Los Angeles range |
|---|---|
| Vanity installation (cabinet + top + sink) | $945 – $3,540 |
| Tile floor (per room) | $1,800 – $6,500 |
| Shower surround tile (per shower) | $2,400 – $7,800 |
| Faucet, shower valve, and trim | $600 – $2,200 |
| Toilet replacement | $350 – $900 |
| Full bathroom vanity/tile/fixture scope | $10,620 – $33,040 |
The variables that push a job toward the high end:
- Room size and tile square footage. A 5×8 hall bath and a 10×12 master bath are different jobs. More square footage means more tile, more labor, more thinset.
- Existing condition. If the subfloor is sound and the framing is straight, you stay low. Water damage, rotted sill plates, or a 1940s mud bed under the existing tile pushes you up. In older Los Angeles homes, we find one of these on a meaningful share of jobs.
- Relocating plumbing or electrical. Moving a sink drain means opening the wall and re-piping. Moving a wall means a permit and an inspection. Leave the sink and toilet on their current walls and you’ll save real money.
- Material grade. Porcelain and stock cabinets sit at the low end. Quartz, epoxy grout, custom cabinetry, and designer fixtures push toward the top.
- Permit scope. Cosmetic swaps (replacing a vanity top, re-tiling a floor) typically don’t require a permit in Los Angeles. Moving plumbing, adding a circuit, or altering the framing does.
Our written estimate spells out what’s included: demo, haul-away, substrate, waterproofing, setting materials, labor, and finish. It also spells out what’s not: tile and fixtures you haven’t selected yet, structural repair if we find rot, and any permit fees. Upfront pricing, no surprises – you’ll see the whole number before we start.
See the difference
Before
After
Before
After
Before
AfterWhat Los Angeles homes specifically do to this job
The single biggest surprise in a Los Angeles bathroom is what’s behind the tile. The city’s housing stock is a patchwork: 1920s-40s Spanish Colonial and Craftsman bungalows in neighborhoods like Silver Lake and Echo Park, postwar stucco tract homes in the Valley, and thousands of 1960s-70s wood-frame dingbats. Bungalow bathrooms often have mud-set tile floors two inches deep and cast-iron drains nearing the end of their life. Dingbat bathrooms are smaller and the plumbing was roughed in for a specific fixture layout, so moving a vanity to the opposite wall can mean re-piping under a concrete slab – which changes the job significantly.
Los Angeles also sits in one of the strictest code environments in the country, with seismic and wildland-urban-interface fire rules shaping how homes are built and renovated. That matters here in a real way: a vanity has to be anchored to wall studs, not drywall, and any tile over a wood-framed shower wall needs a proper backer and waterproofing layer to meet accepted standards. When a project involves moving walls, adding electrical, or altering plumbing inside the wall, we pull permits and arrange inspections routinely. We don’t cut corners on the parts an inspector will see – or the parts they won’t.
If your bathroom work is part of a bigger remodel, our Bathroom Remodeling in Los Angeles page lays out the full scope. And if you’re upgrading the roof or exterior at the same time, homeowners often pair this with Tile Roofing in Los Angeles or Specialty Roofing in Los Angeles to get the whole house handled under one contractor. We cover Los Angeles and the surrounding area, including Culver City, Marina del Rey, El Segundo and Santa Monica. You can see all our Bathroom Remodeling service work and our full Los Angeles coverage.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Vanities, tile and fixtures in Los Angeles
A vanity-only installation takes one to two days. A full floor and shower tile job with new fixtures runs five to twelve working days on site. Add a day or two if we find water damage behind the wall. Call (888) 427-1733 for an estimate based on your room.
Cosmetic work – replacing a vanity top, re-tiling a floor, swapping a faucet or toilet – typically doesn’t require a permit. Moving plumbing, adding an electrical circuit, or altering a wall does. We’ll tell you upfront whether your project needs one and pull it if it does. Call (888) 427-1733 to ask about your specific project.
Yes, and it’s the smartest way to control cost. Leaving the sink drain, toilet drain, and shower valve on their existing walls keeps the job to cosmetic changes with no rough-in work. In Los Angeles dingbats and older bungalows, keeping the plumbing where it is usually saves thousands. Call (888) 427-1733 to talk through your layout.
A vanity installation runs $945 to $3,540, and a full bathroom scope with vanity, tile floor, shower surround, and fixtures runs $10,620 to $33,040. Material choice, room size, and whether plumbing is relocated are the biggest variables. Call (888) 427-1733 for an exact quote – estimates are free.
Every vanity, tile and fixture job we do is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship, and it’s one of the longest workmanship guarantees in residential construction. Call (888) 427-1733 to schedule your free estimate and see the warranty in writing.
Get a written estimate for your Los Angeles bathroom
Call (888) 427-1733 and we’ll schedule a free on-site estimate. We measure the room, look at what’s behind the wall, and hand you a written line-item quote with material options and a firm price. Live person answers around the clock. No-hassle upfront pricing, and 0% financing for 18 months if you’d like to spread the cost. Most projects over $10,000 get $1,000 off. Just want a starting number? Call and we’ll talk through it.
Written by the team at Groundwork Construction Co. of Los Angeles.