Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Los Angeles: What They Cost and How the Work Runs
Custom & geometric windows in Los Angeles typically run $9,440 to $29,500 for a whole-house package of angled, arched, trapezoid or radius units, and a single feature window lands between $3,000 and $8,000 depending on glass and frame. Expect four to nine weeks from first measurement to final inspection, with most of that time spent in fabrication rather than install. Call (888) 427-1733 for a free on-site estimate.
From Template to Trim: How We Build and Set a Geometric Window
Geometric windows fail for one reason more than any other: the rough opening wasn’t built for the shape. A radius or angled unit has almost no adjustment range once it’s fabricated, so the framing, the sheathing and the flashing have to be right before the window ever arrives. Our sequence protects that.
Stage 1: Site measure and template (day 1, roughly 2 hours)
We measure the rough opening at multiple points, check the wall for plumb and square, and confirm the shape you want actually fits the structural bay behind it. For an arch or a trapezoid we build a physical or digital template and send it to the fabricator. This is where you lock the shape and the glass package. Changing a radius after this point means a new unit.
Stage 2: Opening prep and framing corrections (days 2 – 4)
Old stucco comes off around the opening, sheathing gets inspected, and any rot or soft framing gets replaced. If the wall needs a new header to carry a wider geometric unit, that happens now, with a licensed engineer’s detail where the span requires it. You decide the trim style (flat casing, bullnose, or a stucco return) and the interior reveal depth at this stage.
Stage 3: Flashing and water management (day 5)
In a city that gets almost all its rain in a handful of winter storms, the flashing detail matters more than the frame. We set the sill pan, integrate the weather barrier, and slope the sill so water leaves instead of sitting. This is the stage nobody sees and the one that causes the callbacks when it’s skipped.
Stage 4: Unit set, shim, and seal (day 5, same visit)
The window goes in square and shimmed at the correct points, then foamed and sealed with a backer rod and a high-movement sealant, not a bead of caulk smeared over a gap. For a complicated shape, this is a two-person set. You confirm the operation of any operable sash before we close the wall.
Stage 5: Stucco, interior patch, and inspection (days 6 – 10)
The exterior gets patched and floated to match the surrounding texture, the interior drywall is patched, and the job is ready for the city inspection if the scope triggered a permit. We walk the finished window with you, check the seal and the drainage path, and hand over the warranty paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change the Result
- Frame material: Vinyl keeps the price down and handles shapes well, but the color palette is limited. Aluminum lets you make a sharp radius and a slim sightline, at a higher cost and with more attention to thermal breaks in full sun. Wood-clad gives you the warm interior look many Spanish Colonial homes want, with the exterior protected by a factory finish.
- Glass package: A standard dual-pane unit handles most of what you need. Adding a low-E coating with a solar heat gain rating tuned for a south or west wall cuts the afternoon heat that builds inside a glass-heavy room. Tempered glass is required where a unit comes close to the floor or a door.
- Shape complexity: A simple half-round or eyebrow arch costs the least to fabricate. True radius, elliptical, octagon and trapezoid units climb in price because the frame goes through a bending or CNC process and the glass is cut to match. A custom leaded or beveled insert adds a separate line item.
- Operable versus fixed: Most geometric windows are fixed, which keeps the price and the leak risk down. If you want ventilation, an operable awning or casement in the same opening is worth the added cost on a second-story room that gets stuffy.
- Trim and casing: A simple flat casing is the budget pick. A period-correct profile that matches the rest of the house takes more shop time.
What Custom & Geometric Windows Costs in Los Angeles, CA
Figure $9,440 to $29,500 for a package of several custom and geometric units across a house, and roughly $3,000 to $8,000 for one feature window, installed. A single simple arch at the low end; a full set of radius and trapezoid units with upgraded glass at the high end.
Five things push a job toward the top of that range:
- Shape complexity: bent frames and cut-to-shape glass cost more than a stock rectangle.
- Glass spec: low-E, tempered or laminated glass adds to each unit.
- Existing condition: rotted framing or a wall that’s out of square adds labor before the window goes in.
- Structural work: a new header or a widened opening brings engineering and framing cost.
- Stucco scope: matching a 1950s sand-finish texture takes more time than a smooth patch.
A written estimate spells out the unit sizes and shapes, the glass spec, the frame material, the flashing detail, the stucco and interior patch, and the permit line. It does not cover structural engineering if a header change is needed, and it doesn’t cover lead paint or asbestos abatement in a pre-1978 house, which is common in this stock.
See the difference
Before
After
Before
After
Before
AfterWhat Los Angeles Homes Specifically Do to This Job
Los Angeles is a fault-adjacent, fire-prone basin where the ground and the hillsides dictate design, and that lands directly on window work. In the Hollywood Hills and the Santa Monica Mountains, hillside builds sit on pier-and-grade-beam foundations, and every opening in an exterior wall is part of the lateral system. If you plan to enlarge a window into a wider geometric unit, expect a structural detail and possibly a seismic upgrade in the same scope. Fire code adds a second layer: in the high-fire zones at the urban edge, exterior details increasingly have to meet ignition-resistant standards, so the frame and trim materials we specify shift toward what survives an ember shower.
The housing stock is a patchwork that changes the job house by house. Spanish Colonial and Craftsman bungalows on the flats want an arched window that matches the original profile. Postwar 1950s and 1960s stucco tract homes in the Valley have shallow walls and thin sheathing that need careful flashing. On the older housing, the failure we see most is water tracked behind a poorly flashed sill, which rots the framing long before the glass ever fails. Angle-parked dingbats and soft-story buildings being retrofitted under the city’s soft-story ordinance are a different problem again: those openings have to be coordinated with the new steel and shear walls going in.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Los Angeles
A single feature window is usually a two to three day job once the unit arrives. The full four to nine week timeline is mostly fabrication, and complex radius or trapezoid units take the longest. Call (888) 427-1733 for a schedule based on your specific shapes.
Yes, if the opening changes size or the structural framing is altered. A like-for-like replacement in the same opening often doesn’t require a permit, but a widened or newly framed geometric unit does, and it goes through the city inspection. Our crew pulls the permit and schedules the inspection as part of the job. Call us to confirm what your specific project needs.
Yes, in most cases, when the new unit fits the existing rough opening exactly. The moment you widen the frame or change the shape beyond what the opening can take, the wall needs work. We tell you which side of that line your project is on before you commit to a number.
A single feature unit runs $3,000 to $8,000 installed, and a package of several custom and geometric windows runs $9,440 to $29,500. Glass spec, shape complexity and stucco matching move the number more than anything else. The number in our written estimate is the number you pay. Call (888) 427-1733 and estimates are free.
Every custom & geometric window job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. The manufacturer’s warranty on the unit and glass runs separately and we hand you that paperwork at the walkthrough. Call for the written details before you sign anything.
Get a Free Estimate on Custom & Geometric Windows in Los Angeles
We come out, measure the opening, talk through shapes and glass on site, and leave you with a written line-item estimate for your custom & geometric windows in Los Angeles, free and with no obligation. When you call (888) 427-1733 a live person answers, day or night, and we’ll get an estimator to your property. Most Angelenos find the shape and the price settle in one visit. If your plans touch the driveway while the crew is there, homeowners often pair this with Concrete Driveways & Concrete Work in Los Angeles or Asphalt Driveways & Resurfacing in Los Angeles.
This work is part of a full Windows & Doors in Los Angeles scope for many homes, and you can see the wider picture through our Windows & Doors service. We cover the whole of Los Angeles, from the flats to the hillside builds above.
Written by the team at Groundwork Construction Co..