Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Manhattan Beach, CA: What It Takes and What It Costs
Backsplash, Tile & Flooring work in Manhattan Beach typically runs $14,000 – $45,000 depending on square footage, material grade, and how much subfloor or wall prep the job needs. A backsplash alone lands between $800 and $2,500; a full tile floor with substrate correction pushes toward the middle or top of the range. Most single-room projects take one to three weeks from demo to grout. Call (888) 427-1733 and we’ll walk your space and give you a written line-item number.
How We Run a Tile and Flooring Job, Stage by Stage
Tile work is unforgiving of shortcuts. The finish you see is only as good as the prep underneath it, and in coastal homes that prep is usually where the surprises live. Here’s the actual sequence we follow on a Manhattan Beach job.
Stage 1: Demo and tear-out (1 – 2 days)
We pull the existing tile, backsplash, and flooring down to the substrate. On older beach cottages this often means finding drywall that’s been skimmed three times or a subfloor with water staining near the sink. You decide at this stage whether to replace the drywall outright or patch and re-skim. We photograph everything we uncover so you’re looking at the same thing we are.
Stage 2: Substrate correction and waterproofing (1 – 3 days)
This is the stage most bids skip and most failures trace back to. We level the floor, install cement backer board or an uncoupling membrane, and apply a waterproof membrane in wet zones. If the floor has deflection or a soft spot, it gets fixed now, not after the tile is down. You approve any added material before we install it.
Stage 3: Layout and dry-fit (half a day)
We snap the layout and dry-fit tile so you can see where cuts land before anything is set. Grout line width, tile orientation, and where the pattern breaks at a corner or doorway are all decisions you make here. Getting this right now avoids the “I wish we’d centered it” conversation later.
Stage 4: Setting tile and grouting (2 – 5 days)
Tile goes down in stages, with thin-set cure time between passes. Backsplash and wall tile usually go faster than floor tile because there’s less traffic and fewer cuts around fixtures. Grout and sealant come last, and we let the floor cure before anyone walks on it.
Stage 5: Final walkthrough and punch list (1 day)
We walk the job with you, check every grout line and edge, and handle anything on your punch list before we call it done. Your written workmanship guarantee is the 730-Day Done Right Promise: if something isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Backsplash, Tile & Flooring
Material choice drives both cost and how the job holds up in a salt-air environment. Here’s the honest trade-off on each.
- Porcelain tile: The workhorse of the category. Dense, water-resistant, and holds color well. Runs $4 – $15 per square foot installed for standard sizes; large-format 24×24 or bigger pushes higher because of leveling and cutting time. Fits most budgets and most rooms.
- Ceramic tile: Lighter and easier to cut, which keeps labor down. Runs $3 – $10 per square foot installed. Fine for a low-traffic backsplash, but it chips more easily underfoot and isn’t the pick for a busy floor.
- Natural stone (marble, travertine, slate): The look most Manhattan Beach buyers are chasing in a custom build. Runs $12 – $30 per square foot installed. It needs sealing, and in a coastal home it needs resealing more often. Beautiful; higher maintenance.
- Glass or mosaic backsplash: Great for a kitchen wall, less so underfoot. $8 – $20 per square foot installed. Glass shows every thin-set trowel mark, so installation quality matters more than with opaque tile.
- Luxury vinyl plank or engineered flooring: If the “flooring” part of your project is wood-look rather than tile, this is the budget-friendly route. $3 – $9 per square foot installed. Warm underfoot and fast to install, but it won’t match the durability of tile in a wet zone.
What Backsplash, Tile & Flooring Costs in Manhattan Beach, CA
The full-job range is $14,000 – $45,000. A focused backsplash runs $800 – $2,500. What moves a project from the low end to the high end comes down to five variables.
- Square footage and room count: One bathroom floor is a different job than a kitchen floor plus backsplash plus a hallway. Every additional room adds demo, prep, and material.
- Subfloor and wall condition: A floor that needs leveling or a wall that needs new drywall adds $1,500 – $5,000 in labor and material depending on scope.
- Material grade: Porcelain at $4/square foot versus marble at $30/square foot on the same 150 square feet is a swing of nearly $4,000 in tile alone.
- Layout complexity: Herringbone, chevron, and large-format patterns take more cutting and more time. Straight-set 12×12 is the cheapest install; a mosaic feature wall can double the labor on that wall.
- Plumbing or electrical relocation: Moving an outlet or a sink line mid-job turns a tile project into a coordination job. We quote that separately so it never shows up as a surprise line item.
Your written estimate itemizes tile, setting materials, prep, labor, and disposal. It doesn’t itemize a vague “miscellaneous” line, because we don’t write those.
See the difference
Before
After
Before
After
Before
AfterWhat Manhattan Beach Homes Specifically Do to This Job
The housing stock here shapes the work more than most homeowners expect. West of Highland and through the Gaslamp and Strand blocks, salt-laden air attacks exposed fasteners, untreated steel trim, and exterior hardware within a few years, so on sand-adjacent properties we specify stainless and marine-grade materials as a matter of course. Indoors, the marine-layer humidity in Manhattan Beach means moisture behind tile and under floors has to be managed with proper waterproofing and ventilation, not just a bead of caulk. On the older 1950s beach cottages still standing, raised foundations and stucco walls often hide soft subfloor near sinks and doorways, and we find it during demo. Newer custom builds on scraped lots tend to have cleaner substrates, but they also carry designer layouts where a mosaic feature wall or a hidden-ledge backsplash adds cutting time. In the 90266 and 90267 ZIP codes, the typical job here is a gut-level finish package on a custom build rather than an incremental patch, which means tile selections get made early and inspected against the rest of the finish schedule. Tile work that’s part of a full Kitchen Remodeling in Manhattan Beach follows the same prep discipline we use across our Kitchen Remodeling work, and we cover the full Manhattan Beach area including the blocks near the pier and the Tree Section.
Homeowners often pair a tile floor refresh with Vanities, Tile & Fixtures in Manhattan Beach when the bathroom is getting a face-lift at the same time, and some pair it with Tub-to-Shower Conversion in Manhattan Beach if the shower surround is going in the same pass.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Manhattan Beach
Most single-room Backsplash, Tile & Flooring projects in Manhattan Beach take one to three weeks from demo to final grout and sealant. A backsplash-only job can finish in two to four days. A kitchen floor plus backsplash plus a bathroom usually runs two to three weeks, and a whole-house floor can take a month or more. Call (888) 427-1733 for a schedule based on your actual square footage.
Cosmetic tile and flooring replacement generally doesn’t require a building permit; structural, plumbing, or electrical changes that happen alongside it usually do. Moving a drain, relocating an outlet, or altering a subfloor structure crosses into permit territory. We handle the paperwork when a permit is needed and can tell you at the estimate which side of that line your job falls on. Call us for a free walk-through.
Yes, in most cases. If fixtures stay put and the subfloor is sound, the job stays a surface-level project and the cost stays in the lower half of the $14,000 – $45,000 range. When a homeowner wants a new sink location or a wall opened, the scope grows and so does the price. We’ll tell you upfront which kind of job you’re looking at.
A standalone backsplash in Manhattan Beach runs $800 – $2,500, with the low end landing on straight-set ceramic and the high end on glass mosaic or natural stone with a feature wall. Square footage, tile material, and any wall repair are the swing factors. The written quote you get from us itemizes each one. Call (888) 427-1733 for an exact number.
Every Backsplash, Tile & Flooring job we do in Manhattan Beach is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a tile pops, a grout line cracks from installation, or a membrane fails, we come back and fix it. We put that in writing before the first tile goes down.
Get a Free Estimate for Backsplash, Tile & Flooring in Manhattan Beach
Call (888) 427-1733 and we’ll schedule a free on-site estimate at your Manhattan Beach home. We bring samples, measure your space, and hand you a written line-item quote covering materials, prep, labor, and disposal, with no hidden line items. A live person answers the phone any time, day or night. Most estimates take under an hour, and you’ll have a real number in hand before you commit to anything.
Written by the team at Groundwork Construction Co.