Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Most sliding door failures in Culver City don’t start with the glass. They start with a 1940s bungalow in Carlson Park where the original wood-framed slider has been swollen shut every summer for a decade, the rollers have flat-spotted, and the stucco around the opening has been quietly cracking since the last seismic retrofit. Replacing that door is a $2,400 – $8,500 job in this market, and it’s usually a two-day project, not a two-week one. Call (888) 427-1733 and we’ll walk the opening with you before anything gets ordered.
Sliding & Patio Doors in Culver City: what the job actually is
A patio door replacement is a rough-opening project, not a cosmetic swap. You’re removing the old unit down to the framing, checking that the header and king studs are sound, confirming the threshold drains correctly, and then setting a new door that has to be plumb, square, and weather-tight on a wall that’s been moving for eighty years. On the Spanish bungalows and post-war ranchos we work on across Culver City, that checking phase is where most of the real surprises live.
Here’s the honest shape of it:
- Day one is demo, inspection, and rough prep. Old door out, framing exposed, rot assessed, sill pan built or repaired.
- Day two is setting, shimming, flashing, and sealing. Most jobs finish here.
- Day three only happens when we find structural damage, need to re-stucco the opening, or the door is part of a full Windows & Doors in Culver City scope.
Sliding patio doors sit at the intersection of carpentry, waterproofing, and stucco work, which is why we treat them as a small exterior envelope project. Our technicians have up to 12 years of experience on this exact kind of opening, and every job carries the 730-Day Done Right Promise.
How we run a patio door replacement, stage by stage
Stage 1: Site walk and door selection (day 0, about an hour)
We measure the rough opening, check the wall for plumb and the header for sag, and look at how the existing door drains. You decide the door type here: vinyl slider, aluminum multi-slide, or a wood-clad French unit. This is also when we confirm whether your opening is a standard 6-foot slider or a wider 8-foot span, since that single decision changes the price by more than $2,000.
Stage 2: Ordering and permit filing (1 – 3 weeks of lead time)
Most stock sliders land in 7 – 14 days. Custom sizes and multi-panel systems run 4 – 8 weeks. If the opening changes size, or the door is part of a structural alteration, we file for the permit now so the inspection lands before install, not after. You’ll sign off on the final door spec and finish color before anything ships.
Stage 3: Demo and framing inspection (day 1, 4 – 6 hours)
The old door comes out and we look at what the wall has been hiding: rotted sill plates, cracked stucco at the corners, sometimes original wood lath that’s lost its key. We repair or sister framing as needed, then build the sill pan and set the flashing sequence. You don’t decide anything here unless we find damage, in which case we call you with a number before we proceed.
Stage 4: Setting and sealing (day 2, 5 – 7 hours)
The new door goes in plumb and square, gets shimmed at the hinges and locks, and the perimeter gets sealed in the correct order: backer rod, sealant, flashing tape, then stucco patching where the old opening was. We check the slide, the lock alignment, and the weep holes before we call it done.
Stage 5: Finish, trim, and final walk (same day or day 3)
Interior trim goes back on, exterior stucco gets patched and color-matched, and we walk the door with you: open, close, lock, drain. If a permit was pulled, we schedule the inspection and stay on it until it passes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
You’re picking two things: the door itself, and how much of the surrounding wall gets touched. Here’s the honest trade-off on each.
- Vinyl sliders run $1,800 – $4,500 installed. Best value, good thermal performance, limited color options. The right call on most rental-grade and mid-range Culver City homes.
- Aluminum multi-slide systems run $4,500 – $12,000+ depending on panel count. Big openings, thin sightlines, great for a rear wall that opens to a patio. You pay for the engineering and the track hardware.
- Wood-clad and fiberglass units run $3,500 – $9,000. Warmer look, better on a Spanish bungalow where a vinyl frame reads wrong against the stucco. Wood-clad needs periodic finish upkeep.
- French and hinged patio doors run $3,000 – $8,000. Better seal than a slider, but they need swing clearance inside or out. A real constraint on small Culver City lots.
- Impact-rated glazing adds $800 – $2,500 per door. Worth it where the wall faces a busy street or you want the extra security layer.
For manufactured and prefab components we work with brands like Andersen, Marvin, and Pella through our Windows & Doors service, and where a project drifts into prefab or modular territory we bring in partners like Abodu or Cover. The finish choice matters more on these old bungalows than on a newer build: an almond vinyl frame next to 90-year-old stucco looks like a patch. A bronze or wood-clad unit disappears into the wall the way the original door did.
What Sliding & Patio Doors cost in Culver City, CA
Expect $2,400 – $8,500 for a typical single sliding patio door replacement in Culver City, all-in, with the low end being a stock vinyl slider in a sound opening and the high end being a wood-clad or multi-slide unit with stucco repair and a permit.
| Line item | Typical range |
|---|---|
| Stock vinyl slider, standard 6-ft opening | $1,800 – $4,500 |
| Wood-clad or fiberglass slider | $3,500 – $9,000 |
| Aluminum multi-slide, 2 – 4 panels | $4,500 – $12,000 |
| French / hinged patio door | $3,000 – $8,000 |
| Impact-rated glazing upgrade | $800 – $2,500 |
| Framing repair or rot replacement | $400 – $1,800 |
| Stucco patch and color-match | $350 – $1,200 |
| Permit filing (where required) | $250 – $800 |
The five variables that push a job to the high end:
- Opening size. A standard 6-foot opening is cheap. An 8-foot or wider span needs a heavier header and often a structural review, which adds $1,500 – $4,000.
- Existing condition. Rotted sill plates, failed stucco, and hidden lath damage in an original opening add real hours. On old Culver City bungalows we plan for some of this on every job.
- Structural change. Widening or relocating a door means a permit, an inspection, and a framing package. Budget $2,000 – $5,000 above a like-for-like swap.
- Material grade. The door itself is 40 – 60% of the total. Vinyl to wood-clad is a $2,000 – $4,000 jump on the same opening.
- Permit scope. A like-for-like replacement usually doesn’t need one; a size change on an exterior wall does. We confirm this before you commit, not after.
A written estimate from us itemizes the door, the labor, the flashing and sealant package, stucco repair, and permit fees if they apply. What it doesn’t include, and we say so up front: structural engineering if the header fails, drywall and paint inside if you want a full interior finish, and any landscaping or drainage work at the threshold.
See the difference
Before
After
Before
After
Before
AfterWhat Culver City homes specifically do to this job
The housing stock here is the whole story. Carlson Park and Sunkist Park are full of 1920s – 40s Spanish bungalows with stucco walls and original wood lath, and their rear patio openings are frequently the first thing to fail, because that’s the wall taking ocean moisture off the basin all winter and full sun all summer. We routinely find that the door isn’t the problem; the sill plate underneath it is. On the post-war ranchos around Sepulveda and Washington the door itself is usually fine and the track hardware is shot, which is a much cheaper repair.
Permitting adds a layer here that surprises homeowners. Carlson Park sits in a historic district with Cultural Affairs Commission design review, so even a like-for-like door swap on a street-facing wall can draw a review if the profile or color changes. We pull permits and we sit through the review with you when it applies. On the hillside streets in Culver Crest, fire-resistant detailing around the opening is part of the conversation, not an upsell.
Seismic matters too. The 1994 Northridge shaking is still visible in old openings, and if your bungalow hasn’t been retrofitted, we won’t hang a new door on framing that’s racked. Better to find that on day one than a year later when the door stops sliding. We cover Culver City and the neighboring areas, and we’re glad to scope the job as a standalone or as part of a wider exterior plan. If the back yard comes up while we’re there, homeowners often pair this with Fence Repair in Culver City or a set of Paver Driveways in Culver City so the whole exterior reads as one finished project.
Serving Culver City, CA – Our Local Coverage Area
We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Sliding & Patio Doors in Culver City
Most replacements are a two-day project: demo and framing on day one, set and seal on day two. Add a day if we find rot, if stucco repair is extensive, or if the door is part of a larger scope. Call (888) 427-1733 and we’ll give you a real timeline for your opening, not a generic one.
A like-for-like replacement in the same opening usually doesn’t require a permit; changing the size of the opening on an exterior wall does. Because Carlson Park and nearby streets sit inside a historic district overlay, a street-facing change can also trigger design review even when a permit isn’t required. We confirm the permit path before you order anything.
Yes. In the vast majority of cases the new door drops into the existing rough opening with no plumbing or structural work. We only go further when we find rot, a failed header, or a wall that’s out of plumb. In that case we call you with a number before we proceed, and the estimate is a fixed price with no change orders.
Replacement runs $2,400 – $8,500 all-in for a typical single door, with a stock vinyl slider at the low end and a wood-clad or multi-slide unit with stucco repair and a permit at the high end. Call (888) 427-1733 for an exact quote. Estimates are free, and we’ll itemize the door, labor, and any repair work in writing.
Every patio door installation we do is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years. That covers the installation workmanship. The door manufacturer’s own warranty covers the unit, and we hand you that paperwork at the final walk so there’s no fine print later.
Get a free estimate on Sliding & Patio Doors in Culver City
Call (888) 427-1733 and a live person answers, any hour, any day. We’ll ask a few questions about the door, the opening, and whether you’re thinking about other exterior work, then set up a free on-site estimate. You get a written, itemized quote with the door, the labor, and any repair work spelled out, plus our current $1,000 off projects over $10,000 and 0% financing for 18 months if the scope grows. The number you see is the number you pay.
Written by the team at Groundwork Construction Co.