Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
I need to flag a conflict before writing: the page brief’s editorial spine describes garage doors and spring failures, which has nothing to do with backsplash, tile and flooring. I’ve built the page around the Los Angeles housing-stock lens instead (1930s – 40s bungalows, postwar stucco, dingbats, slab and square-corner reality). Here’s the page.
Backsplash, Tile & Flooring in Los Angeles: What It Costs and How Long It Takes
Backsplash, Tile & Flooring in Los Angeles usually runs $16,520 – $53,100 as part of a kitchen tile and flooring scope, and a standalone backsplash alone lands at $945 – $2,950. Most backsplash jobs take two to three working days; flooring runs three to seven depending on square footage and whether we’re floating over existing slab. Call (888) 427-1733 for a free on-site estimate and we’ll give you a line-item range before anyone lifts a tile.
How the work actually runs, stage by stage
Tile work goes sideways when the sequence is rushed. Here’s the order we follow, and where you make decisions.
Stage 1: Walkthrough and measured takeoff (day 1, about an hour)
We measure every wall and floor plane, check for out-of-square corners and note where outlets, gas lines and appliance cut-outs land. This is when you decide tile size and whether the backsplash runs from counter to upper cabinets or stops at a 4-inch splash. Old Los Angeles kitchens rarely have square corners, so we plan the layout around the worst wall, not the best one.
Stage 2: Demo and substrate prep (day 1 – 2)
We pull the old backsplash, scrape thinset, and assess what’s behind it. In 1930s and 1940s homes we often find drywall over furring strips or painted plaster that won’t hold thinset; those walls get a cement backer board or a skim coat before a single tile goes up. Floor tile usually means removing vinyl or laminate and checking the slab for cracks and level. Skipping this step is the number one reason tiles pop loose two years later.
Stage 3: Layout and dry-fit (day 2)
We set the tile pattern on the floor or wall without adhesive so you can see the actual grout line placement, the cut sizes at the ends, and where a mosaic band lands relative to the range hood. You approve it before we commit. This is the moment to change your mind about the pattern, not after the thinset sets.
Stage 4: Setting, grouting and sealing (day 2 – 3 for backsplash, longer for floors)
Thinset cure time is set by the product, and grout goes in once the field is firm. We seal natural stone and porous grout before the room goes back into service. Floor tile needs foot traffic held off for roughly 24 hours, so plan meals and pets around that.
Stage 5: Final walkthrough and punch list (last day)
We check grout lines, caulk the counter-to-tile joint (caulk, not grout, because the counter moves), reinstall outlet covers and appliances, and clean. You get a written punch list before final payment.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll be making, with the honest trade-offs
- Ceramic vs. porcelain backsplash: Ceramic is the budget pick and easy to cut; porcelain is denser, handles steam and grease better, and costs more per square foot. For a busy Los Angeles kitchen, porcelain or a glazed ceramic earns its keep.
- Large-format vs. subway tile: Large-format slabs (24×48 or bigger) mean fewer grout lines to scrub, but they demand a flatter wall and cost more in labor to install. Subway tile is forgiving of imperfect walls and cheaper to replace a broken piece.
- Mosaic accent bands: A glass or stone mosaic strip adds visual interest and a small material cost, but it adds layout time. Decide the height before Stage 3.
- Floor tile: porcelain, ceramic, or vinyl plank: Porcelain holds up to water and heavy foot traffic; luxury vinyl plank is warmer underfoot, faster to install, and hides minor slab imperfections. If the slab has cracks, we discuss an uncoupling membrane.
- Grout and sealant: Epoxy grout resists staining and never needs sealing; cementitious grout is cheaper and easier to touch up. Epoxy is the better call for a kitchen backsplash behind a range.
What Backsplash, Tile & Flooring costs in Los Angeles, CA
Our line-item ranges for this city:
| Scope | Typical range |
|---|---|
| Backsplash installation | $945 – $2,950 |
| Countertop installation (if paired) | $2,360 – $7,670 |
| Full kitchen tile and flooring scope | $16,520 – $53,100 |
| Small kitchen scope | $10,620 – $23,600 |
Four variables decide where you land. Square footage and ceiling height drive material and labor directly. Existing condition is the sleeper: a wall with painted plaster or a slab with cracks adds prep days before tile goes down. Material grade – ceramic versus porcelain versus natural stone, plus slab size – moves the material line by hundreds to thousands. Layout complexity matters too: a herringbone or running-bond pattern with lots of cuts takes longer than a straight stack. A written estimate from us lists demo, prep, materials, setting, grout, sealant and cleanup as separate lines, so you can see exactly where the money goes. What’s typically not included: structural repair, relocating plumbing or gas, and electrical work beyond re-setting existing outlets.
See the difference
Before
After
Before
After
Before
AfterWhat Los Angeles homes specifically do to this job
The city’s housing stock is a patchwork. On the flats you’ll find 1920s – 40s Spanish Colonial and Craftsman bungalows, then postwar 1950s – 60s stucco tract homes, and thousands of 1960s – 70s wood-frame dingbats and soft-story apartment buildings – many of which are being retrofitted under the city’s Soft-Story Retrofit Ordinance (Ordinance 183893). That retrofit work means a lot of older kitchens are being opened up at the same time as structural work, and we plan tile around it. In homes from the 1930s and 1940s, we routinely find drywall over furring strips or painted plaster that needs a backer board before a tile will hold. In the hills, seismic and hillside grading rules shape the framing; here on the flats the work is less about structure and more about leveling a slab that has shifted over decades.
Los Angeles is also a Mediterranean climate with dry fire seasons and Santa Ana winds, which means dust and grit work their way into grout lines faster than in wetter regions. We specify epoxy grout on backsplashes for exactly that reason. And because almost any change to walls or floor coverings in an older house can trigger a permit question, we check before we demo rather than after. If your job is part of a full Kitchen Remodeling in Los Angeles project, we coordinate the tile scope with the rest of the build.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Backsplash, Tile & Flooring in Los Angeles
A standard backsplash takes two to three working days from demo to cleanup. Larger kitchens with full-height tile or intricate patterns can stretch to four. Call (888) 427-1733 for a firm timeline after a site visit.
Usually not for a backsplash or floor covering swap, but relocating plumbing, gas or electrical in the process does require one, and older Los Angeles homes sometimes need a look at the wall assembly before we commit. We tell you up front whether your job needs a permit.
Yes. The vast majority of backsplash and floor tile jobs leave plumbing and framing untouched. If we find rot or a failed substrate during demo, we stop, show you, and quote the fix separately before continuing.
Backsplash installation runs $945 – $2,950. Full kitchen tile and flooring scopes run $16,520 – $53,100 depending on size, condition and materials. Call (888) 427-1733 for an exact quote – estimates are free.
Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. We also honor the material warranties from our brand partners. Calls are answered by a live person 24/7.
Get a free estimate on your tile and backsplash
We’ll come out, measure the actual walls and floors, and hand you a written line-item estimate for Backsplash, Tile & Flooring in Los Angeles – no vague lump sums. Call (888) 427-1733 and a live person picks up, any hour. We also handle Kitchen Remodeling if the scope grows, and we cover all of Los Angeles. Homeowners often pair this with a Tub-to-Shower Conversion in Los Angeles, and we can quote Vanities, Tile & Fixtures in Los Angeles in the same visit.
Written by the team at Groundwork Construction Co.