Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Calabasas, CA: What to Expect
Backsplash, Tile & Flooring work in Calabasas runs $14,000 to $45,000 for a full kitchen tile and floor package, and most jobs take two to four weeks from demo to grout. A backsplash alone is $800 to $2,500. Floor tile across a kitchen and adjoining rooms, plus layout, prep, and finish, is where the range spreads out. Call (888) 427-1733 and we’ll walk your space and hand you a written line-item estimate.
How We Run a Tile and Flooring Job, Stage by Stage
Tile work fails on prep, not on tile. Here’s the actual sequence we follow so you know what’s happening on day one versus day ten.
1. Measure, layout, and material lock (day 1, 2 to 3 hours)
We measure every wall and floor plane, check for out-of-square corners and floor deflection, and map where tile lines will land. This is where you decide tile size, pattern, grout color, and whether the backsplash runs to the underside of the upper cabinets or all the way to the ceiling. Slope matters: a 12×24 tile on a wavy wall looks wrong no matter how good the setter is, so we plan the layout around what the wall actually does.
2. Demo and substrate prep (1 to 3 days)
Old backsplash comes off, drywall gets patched or replaced, and floor covering comes up. On a hillside Calabasas house, this is also where we find what the last remodel hid: cracked slab, uneven framing, old mastic. We set backer board or an uncoupling membrane and check the floor is flat to within tolerance before a single tile goes down. Skipping this step is the number one reason tiles crack a year later.
3. Waterproofing and setting (2 to 4 days)
Wet areas get a waterproof membrane. Tile gets set with the right thinset for the material, porcelain and natural stone cure differently. Large-format tile needs a leveling system so lippage stays invisible. You’ll see us checking with a straightedge, not eyeballing it.
4. Grout, seal, and trim (1 to 2 days)
Grout goes in after the thinset cures, then we seal natural stone and any porous grout. Schluter trim, caulk at the counter joint, and outlet spacers get finished here. You pick grout color and trim profile before this stage, not during it.
5. Walkthrough and punch list (same day)
We walk the job with you, mark anything that needs attention, and schedule the fix. Every project carries our 730-Day Done Right Promise, so if a tile lifts or a grout line fails inside that window, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Weigh Before We Order Anything
Tile is a spec decision, and the choice you make in week one drives both the price and how the kitchen feels in year ten.
- Porcelain vs. ceramic floor tile. Porcelain is denser, handles foot traffic and moisture better, and costs $3 to $9 per square foot installed. Ceramic runs cheaper at the low end but chips and wears faster in a busy kitchen. For a Calabasas kitchen that opens to a living area, porcelain is the usual pick.
- Natural stone (travertine, marble, slate). The Mediterranean estates around The Oaks and Calabasas Hills often call for stone, and it’s beautiful. It’s also $8 to $20 per square foot installed, needs sealing, and shows etching from citrus and vinegar. Worth it if you love the look and will maintain it.
- Large-format vs. mosaic backsplash. A 12×24 or larger slab backsplash reads clean and modern with fewer grout lines; a glass or marble mosaic adds detail and costs more per square foot because of labor. Pick based on the cabinet style, not just the photo you saved.
- Grout and trim. Epoxy grout resists staining and never needs sealing, at a modest upcharge. Cement grout with a sealer is the budget route. Metal or matching trim finishes the edges; caulk, not grout, belongs at the counter joint so it can flex.
- Pattern and layout. A straight-set or running-bond pattern is the least expensive to set. Herringbone and chevron patterns add real labor cost because every cut is angled. The pattern is your call, but we’ll tell you what it adds before you commit.
What Backsplash, Tile & Flooring Costs in Calabasas, CA
A full kitchen backsplash, tile, and flooring package in Calabasas lands between $14,000 and $45,000. A backsplash by itself runs $800 to $2,500. Here’s what pulls the number toward one end:
- Square footage and number of rooms. Tile flowing from the kitchen into a dining and living area multiplies material and labor. A single kitchen floor sits at the low end; whole-floor tile pushes high.
- Existing condition. A flat, sound substrate is cheap to prep. A cracked slab or out-of-level floor in a canyon home needs leveling compound and membrane, which adds days and dollars.
- Material grade. Ceramic at $3 per square foot versus marble at $20 installed is most of the spread on a large job.
- Layout complexity. Herringbone, diagonal cuts, and perimeter-to-perimeter design add 20 to 40 percent labor.
- Whether anything moves. Relocating a gas line or an outlet to fit a new tile layout means a licensed trade and inspection. That’s outside tile work and priced separately.
A written estimate from us lists material, setting, prep, and trim line by line, with upfront pricing and no change orders for work already quoted. What it doesn’t cover is hidden damage under old tile until we open it up, and we price that as a documented add if it turns up. 0% financing for 18 months is available, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Calabasas Homes Specifically Do to This Job
Calabasas sits in the Santa Monica Mountains foothills, and that shapes tile work in ways flatland crews don’t see. Hillside and canyon lots mean out-of-level floors and walls that are rarely plumb, so substrate prep takes longer than on a flat-lot ranch home. We work in the 91302 and 91372 ZIPs, and much of what we tile is a mix of 1960s-70s ranch homes and the tiled, stucco-walled Mediterranean estates in Calabasas Hills and Mulholland Heights.
Fire matters here too. Calabasas is in a Very High Fire Hazard Severity Zone, and post-Woolsey Fire rebuild standards push tile choices toward noncombustible surfaces like ceramic, porcelain, and stone rather than anything that can smolder. That’s a real reason your kitchen finishes are more often hard-surface than wood. Permitting follows the City’s hillside and oak-tree rules; interior tile that stays within the existing footprint usually needs no permit, but moving plumbing or gas for a layout change does. If your project is part of a full Kitchen Remodeling in Calabasas, the scope gets coordinated with the rest of the build. We also cover the surrounding slopes and canyons through our Calabasas service area. Where it makes sense, homeowners often pair tile and flooring with Tub-to-Shower Conversion in Calabasas or a fresh Vanities, Tile & Fixtures in Calabasas project so the hard surfaces match throughout the house.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Calabasas
A backsplash alone takes two to four days. A full flooring and backsplash package runs two to four weeks depending on square footage and substrate prep. Homes on sloping canyon lots can add a few days for leveling. Call (888) 427-1733 for a schedule after we measure.
Replacing tile in the same footprint usually needs no permit. Moving plumbing, gas, or electrical for a new layout does, and that work goes to a licensed trade and gets inspected. We tell you which applies before work starts.
Yes, most backsplash and floor jobs are done without touching plumbing or framing. If your layout requires moving a sink or an outlet, we scope it separately so you see the cost up front.
A backsplash in Calabasas runs $800 to $2,500 depending on material and square footage. The full tile and flooring package is $14,000 to $45,000. Call (888) 427-1733 for an exact quote; estimates are free.
Every tile and flooring job carries our 730-Day Done Right Promise. If a tile lifts, a grout line cracks, or a setting issue shows up within two years, we return and fix it. That guarantee is in writing, not verbal.
Get a Free On-Site Estimate for Your Tile Project
We’ll measure your space, show you the material options that fit the budget, and hand you a written line-item estimate for backsplash, tile & flooring in Calabasas. One call gets it scheduled: dial (888) 427-1733 and a live person answers, day or night. On the visit we confirm scope, timeline, and price up front so there are no surprises once the tile is ordered. Our kitchen remodeling team handles the wider project if you want to compare scope.
Written by the team at Groundwork Construction Co..