Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Calabasas, CA: What It Costs and How It Holds Up
A wood fence in Calabasas typically runs $3500 – $9000 for a standard residential run, and most jobs are built in two to four days once materials are on site. Fence is one of the highest-risk exteriors on a hillside lot here, because a wood fence is often the first thing a Santa Ana wind event tests and the first thing you rebuild after it. Call (888) 427-1733 for a free on-site estimate with a written line-item quote.
How We Build a Wood Fence in Calabasas, Step by Step
Every wood fence job follows the same five-stage sequence. The durations below assume a typical 100 – 150 linear foot residential run on reasonably accessible ground. Hillside lots in the canyons run longer, and we tell you that up front rather than after the digging starts.
Stage 1: Site walk and layout (day one, 1 – 2 hours)
We walk the property line with you, confirm where the fence runs, and check for the things that change the plan: gas and water lines, irrigation, existing footings, and protected trees. On a sloped lot this is also where we decide whether posts step down the grade in panels or whether we need a stepped retaining detail at the base. You decide panel heights and the gate locations at this stage, because moving a gate later means moving a post.
Stage 2: Digging and setting posts (day one to two)
Posts get set in concrete footings, then left to cure before anything heavy goes on top. Depth depends on soil and grade, and on hillside ground we go deeper than a flat-lot spec would call for. This is the stage that fails first if it’s rushed, and it’s the one nobody sees once the pickets go on. You’re not deciding anything here; you’re getting the day or two of curing time that keeps the fence straight five years from now.
Stage 3: Rails, pickets, and framing (day two to three)
Rails go on, then pickets, then the top cap or trim detail you chose. This is where the fence actually looks like a fence, and where the board spacing, height transitions, and any lattice or shadowbox pattern show up in person. If you want to change a detail, this is the last easy moment to do it.
Stage 4: Gates and hardware (day three)
Gates get hung, latched, and adjusted. A gate is the part of a wood fence that gets used every day, so we set hinges and stops so the gate swings clean and latches without a lift. You’ll want to confirm gate swing direction and latch height before we hang it.
Stage 5: Final walk and cleanup (day three to four)
We walk the whole run with you, check post plumb, board alignment, and gate operation, and haul off every scrap. That final walk is also when we go over the 730-Day Done Right Promise in plain terms: if something isn’t right, we come back and make it right. That covers the build, not just the day it was finished.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Wood Fence Options You’ll Actually Choose Between
Wood fence isn’t one product. What you pick at each of these decisions is what determines both the price and how long the fence survives a windy spring.
- Cedar versus pressure-treated pine. Cedar is the better-looking board and resists moisture and insects naturally, but it costs meaningfully more per linear foot. Pressure-treated pine is the budget-friendly workhorse; it needs sealing and will move more with the seasons. On exposed ridgelines we lean cedar.
- Board-on-board versus dog-ear pickets. Board-on-board overlap gives you full privacy and better wind performance because air can’t force its way through the seams. Standard dog-ear pickets are cheaper and let some light and breeze through.
- Post size and footing depth. A 4×4 post is standard. A 6×6 post costs more but holds up far better on an exposed slope and is what we’d spec for a fence that has to survive a wind event rather than just look fine on a calm day.
- Height. Six feet is the common residential height. Anything taller needs a conversation about wind load and sometimes about local limits, and on a slope the effective height changes as the ground drops.
- Finish and stain. A penetrating stain protects the wood and buys you years between recoats. Clear sealer shows the grain; a tinted stain hides weathering. Neither is permanent, and we’ll tell you the realistic recoat interval for your exposure.
What a Wood Fence Costs in Calabasas, CA
Expect $3500 – $9000 for a residential wood fence in Calabasas, with most standard runs landing in the middle of that range. A few variables push a job toward either end:
- Linear footage and height. This is the biggest single driver. A 60-foot fence and a 200-foot fence are different jobs.
- Grade and access. A flat, accessible side yard is fast. A canyon lot where materials have to be carried down a slope, or where a retaining wall is in the way, adds labor.
- Existing fence removal. Tearing out an old fence and hauling it off is real work and shows up as a line item.
- Material grade. Cedar and 6×6 posts push you toward the high end; pressure-treated pine and 4×4 posts keep you lower.
- Gates and hardware. Each gate adds cost, and a wide double gate or a gate on a slope adds more.
A written estimate from us is line-itemed: footage, material grade, post spec, gates, removal, and cleanup, each with its own number. What we don’t include without asking is anything the site walk didn’t reveal, like a hidden footing, a gas line in the dig path, or a slope that needs a base detail. We’d rather price that honestly up front than surprise you mid-job. Upfront pricing, no surprises is the standard we hold ourselves to on every fence.
See the difference
Before
After
Before
After
Before
AfterWhat Calabasas Homes Specifically Do to This Job
Calabasas sits in the Santa Monica Mountains foothills, which means most of the lots we build on are hillside or canyon lots, not flat suburban parcels. Fence posts on a slope don’t sit level with each other, so we step panels down the grade and dig deeper footings than a flat-lot fence needs. Then there’s the wind exposure: this is a Very High Fire Hazard Severity Zone, and during Santa Ana wind events an exposed wood fence takes real load. A fence that looks fine in June can lean or fail after a windy October, and we build with that in mind. The protected coast live oaks matter too: in neighborhoods like The Oaks and Calabasas Hills, a fence line near a protected tree can require a setback, and the city’s oak-tree ordinance is worth checking before we dig near a trunk. Post-Woolsey Fire rebuilds in the canyons are common here, and those lots often have newer drainage and grading details that a fence has to work around. Between the 1960s-70s ranch homes and the newer custom estates in Mulholland Heights, the fence spec that suits each is genuinely different, and we build both.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Wood Fence in Calabasas
Most residential wood fence projects in Calabasas take two to four days from start to finish, including post curing time. Hillside lots and larger runs can extend that, and we give you the real schedule in your written estimate rather than a best-case number. Call (888) 427-1733 to talk through your timeline.
Fence permits in Calabasas depend on height, location, and whether the fence sits in a protected tree zone or a canyon lot subject to hillside rules. We check the requirements for your specific property before we build, and we’ll tell you plainly what applies. Call (888) 427-1733 and we’ll walk through what your lot needs.
In most cases yes, because fence posts follow the property line rather than the utility runs. When a post lands near a gas, water, or irrigation line, we adjust the post location rather than dig blind, and that’s exactly what the site walk is for. Call (888) 427-1733 to schedule an on-site estimate.
A wood fence in Calabasas runs $3500 – $9000, driven mostly by linear footage, post spec, material grade, and whether old fence removal is part of the job. Every estimate is written line by line so you can see where the money goes. Call (888) 427-1733 for an exact quote, estimates are free.
Every wood fence we build is covered by our 730-Day Done Right Promise: if it isn’t done right, we come back and make it right. That covers the workmanship, not just the day of install. Call (888) 427-1733 and we’ll walk you through exactly what the promise covers on your job.
Get a Free Wood Fence Estimate in Calabasas
Call (888) 427-1733 to schedule a free on-site estimate for your wood fence in Calabasas. A live person answers, day or night. We’ll walk the line, check the grade and the tree setbacks, and hand you a written line-item quote with no surprises. If your project turns into a bigger exterior refresh, fence work is often part of a Fence Installation in Calabasas plan, and homeowners often pair it with Paver Driveways in Calabasas or Concrete Driveways & Concrete Work in Calabasas. See our Fence Installation service for the wider scope, and our Calabasas service area page for coverage.
Written by the team at Groundwork Construction Co.