Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Los Angeles: Cost, Timeline, and What Actually Gets Built
A chain link fence in Los Angeles typically runs $4,130 – $10,620 for a standard residential lot, with most single-family side and rear runs landing near the middle of that range. The work itself is fast: a typical 150 – 200 foot run is a two- to three-day job once we’ve pulled permits and marked utilities. Call (888) 427-1733 for a free on-site estimate with a written, line-item quote.
Key takeaways
- Most Los Angeles chain link jobs finish in 2 – 3 working days on site.
- Galvanized is the standard; vinyl-coated lasts longer and looks cleaner against stucco.
- Property-line fences usually need a permit and a survey before anyone digs.
- Slope, soil, and gate count move the price more than linear footage alone.
How a chain link fence goes in, stage by stage
We don’t hand you a vague “we’ll be there sometime next week” and disappear. Here’s the real sequence, start to finish.
Stage 1: Property line and utility locate (day 1, half a day)
On a Los Angeles lot, the first question is almost always “where’s the actual line?” Older parcels in neighborhoods like Echo Park, Highland Park, and Boyle Heights were often subdivided before modern surveying, and the fence you’re replacing may not sit on the legal boundary. We call 811 for utility marking and, if the line is uncertain, recommend a licensed surveyor before a single post goes in. This is the homeowner’s decision point: build to the visible existing line or pay for a survey to settle it. On a contested line, the survey is worth every dollar.
Stage 2: Demolition and post setting (day 1 – 2)
Old fencing comes out, posts get set in concrete, and the concrete cures. Post spacing runs 8 to 10 feet for standard residential height; corners, ends, and gate posts get larger-diameter pipe and deeper footings because they carry the tension. This is where soil matters. In the flats, our clay-heavy soil holds a footing well but expands and contracts with seasonal moisture. On hillside lots in the Hollywood Hills or the Santa Monica Mountains, we’re often into decomposed granite or rock, and footing depth and drilling time both climb.
Stage 3: Rails, tension wire, and mesh (day 2 – 3)
Top rail, tension bars, and the chain link fabric get stretched and tied off. This is the part that separates a fence that stays taut for fifteen years from one that sags by the second summer. Tensioning is a skill, not a shortcut, and the difference shows the first time a Santa Ana wind event rolls through.
Stage 4: Gates and hardware (day 3)
Walk gates and drive gates get hung, latches set, and swing checked. Gate count is one of the biggest price movers on this job. A single walk gate is straightforward; a wide double drive gate needs heavier posts, a drop rod, and often a different frame than a stock kit provides.
Stage 5: Walkthrough and cleanup (same day)
We walk the line with you, check tension and gate swing, haul off old material, and hand over the written workmanship guarantee. Any adjustment is on us. That’s what the 730-Day Done Right Promise means in practice: if it isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
A chain link fence isn’t one product. Here’s what the decision looks like in real terms.
- Galvanized steel: the baseline. Zinc-coated and built for decades of service. Cheapest per foot, and the honest choice for a rear property line that nobody looks at. It weathers to a dull gray.
- Vinyl-coated (color-core or bonded): black or green coating over the steel. Costs roughly 15 – 25% more, holds color longer against LA sun, and reads far cleaner against a stucco wall or a Spanish Colonial facade. This is what most homeowners pick for a front or side run.
- Height: 4-foot for garden borders, 5-foot for most residential, 6-foot where you want a real barrier. Above 6 feet in many LA zones, screening and setback rules tighten, so check before you commit.
- Mesh gauge and diamond size: heavier gauge and smaller diamonds resist climbing and dogs better. Standard residential mesh is fine for a boundary; a heavier weave costs more but holds its shape.
- Top rail and framework: a full top rail with tension wire beats rail-less economy builds. Ask for it explicitly, because cheap bids often leave it out.
- Gates: walk gates, double drive gates, or a self-closing pool-code gate. Each adds cost and each needs heavier posts than the fence line.
What Chain Link Fence costs in Los Angeles, CA
Local chain link fencing runs $4,130 – $10,620 for a typical residential installation. The range is wide because five variables do most of the moving:
- Linear footage: the biggest driver. A short side run sits at the low end; a full perimeter around a corner lot sits at the top.
- Slope and terrain: flat lots are fast and cheap. A hillside run with stepped panels and deeper footings adds labor and material.
- Gate count and size: each gate is its own small project. A wide double drive gate can add meaningful cost on its own.
- Material grade: galvanized vs. vinyl-coated, standard vs. heavy gauge, full top rail vs. economy build.
- Permit and survey scope: a straightforward over-the-counter permit is one thing; a survey or a contested line is another.
A written estimate from us breaks out posts, mesh, gates, hardware, concrete, labor, and permit fees line by line. What it typically excludes: surveyor fees, tree removal, and any grading. Upfront pricing, no surprises: the number you see is the number you pay. Most homeowners pair a boundary fence with Concrete Driveways & Concrete Work in Los Angeles when the gate approach is torn up, or with Asphalt Driveways & Resurfacing in Los Angeles when the driveway meets the new gate line.
See the difference
Before
After
Before
After
Before
AfterWhat Los Angeles homes specifically do to this job
Los Angeles is a patchwork of build eras, and the fence job changes with the era. Around the flats in neighborhoods like Hancock Park and West Adams, 1920s Spanish Colonial and Craftsman homes often sit on lots with original planting and mature trees whose roots run right along the property line. Digging a footing through a hundred-year-old ficus root system is a different afternoon than setting posts in clean soil. Postwar stucco tract homes in the Valley tend toward straight, simple runs where the fence is more about a dog or a boundary than aesthetics.
The hillside side of the city is where things get complicated. On slopes in the Hollywood Hills and the Santa Monica Mountains, footing depth, stepped panels, and slope drainage all climb the price. Winter rain on steep, fire-scarred hillsides can move soil and undermine footings, so we set deeper and grade runoff away from the line. Fire-zone requirements in the hills also push some homeowners toward non-combustible options like steel rather than wood. Permitting is its own story: fence permits in Los Angeles are generally straightforward, but height limits and setback rules vary by zone, and hillside lots carry grading rules that flat lots never touch. We pull the permit and handle the inspection, so you’re not the one chasing the city. If the project grows into something bigger, our Fence Installation in Los Angeles page covers the wider scope, and you can see everything we do across Los Angeles.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Chain Link Fence in Los Angeles
Most residential chain link fences are finished in 2 – 3 working days on site. Permit approval adds time before we start, but the build itself is fast once material is on the ground. Call (888) 427-1733 for a free estimate and we’ll give you a realistic window for your specific lot.
Often yes, especially for a fence on the property line or over a certain height. Requirements vary by zone and by hillside rules, so we check before we dig. We pull the permit and pass the inspection for you. Call (888) 427-1733 and we’ll sort out what your property needs.
Plan for $4,130 – $10,620 for a standard residential installation. The low end is a short flat run in galvanized steel; the high end is a full perimeter with gates, vinyl-coated finish, and slope. Call (888) 427-1733 for an exact quote. Estimates are free.
No. We quote line by line and hold the number, unless you ask for a change mid-job. Upfront pricing, no surprises. If we hit rock or an unexpected root system during digging, we tell you before we proceed, not after. Call (888) 427-1733 to get that written estimate started.
All our work is covered by the 730-Day Done Right Promise. If something isn’t right, we make it right. Our technicians are background-checked, arrive in uniform, and have up to 12 years of experience on fencing and site work. Call (888) 427-1733 for details.
Get a free on-site estimate
Chain link fencing in Los Angeles comes down to the line, the slope, and the gates, and none of that reads well off a phone call alone. Call (888) 427-1733 and a live person picks up, any hour. We’ll schedule a free on-site estimate, measure the run, mark utilities, and hand you a written line-item quote with a firm number. No pressure, no hidden fees, and 0% financing for 18 months is available if you want it. Our fence installation team handles the rest.
Written by the team at Groundwork Construction Co.